562 research outputs found
Ultra Wideband Impulse Radio Systems with Multiple Pulse Types
In an ultra wideband (UWB) impulse radio (IR) system, a number of pulses,
each transmitted in an interval called a "frame", is employed to represent one
information symbol. Conventionally, a single type of UWB pulse is used in all
frames of all users. In this paper, IR systems with multiple types of UWB
pulses are considered, where different types of pulses can be used in different
frames by different users. Both stored-reference (SR) and transmitted-reference
(TR) systems are considered. First, the spectral properties of a multi-pulse IR
system with polarity randomization is investigated. It is shown that the
average power spectral density is the average of the spectral contents of
different pulse shapes. Then, approximate closed-form expressions for the bit
error probability of a multi-pulse SR-IR system are derived for RAKE receivers
in asynchronous multiuser environments. The effects of both inter-frame
interference (IFI) and multiple-access interference (MAI) are analyzed. The
theoretical and simulation results indicate that SR-IR systems that are more
robust against IFI and MAI than a "conventional" SR-IR system can be designed
with multiple types of ultra-wideband pulses. Finally, extensions to
multi-pulse TR-IR systems are briefly described.Comment: To appear in the IEEE Journal on Selected Areas in Communications -
Special Issue on Ultrawideband Wireless Communications: Theory and
Application
The Trade-off between Processing Gains of an Impulse Radio UWB System in the Presence of Timing Jitter
In time hopping impulse radio, pulses of duration are transmitted
for each information symbol. This gives rise to two types of processing gain:
(i) pulse combining gain, which is a factor , and (ii) pulse spreading
gain, which is , where is the mean interval between two
subsequent pulses. This paper investigates the trade-off between these two
types of processing gain in the presence of timing jitter. First, an additive
white Gaussian noise (AWGN) channel is considered and approximate closed form
expressions for bit error probability are derived for impulse radio systems
with and without pulse-based polarity randomization. Both symbol-synchronous
and chip-synchronous scenarios are considered. The effects of multiple-access
interference and timing jitter on the selection of optimal system parameters
are explained through theoretical analysis. Finally, a multipath scenario is
considered and the trade-off between processing gains of a synchronous impulse
radio system with pulse-based polarity randomization is analyzed. The effects
of the timing jitter, multiple-access interference and inter-frame interference
are investigated. Simulation studies support the theoretical results.Comment: To appear in the IEEE Transactions on Communication
Performance Evaluation of Impulse Radio UWB Systems with Pulse-Based Polarity Randomization
In this paper, the performance of a binary phase shift keyed random
time-hopping impulse radio system with pulse-based polarity randomization is
analyzed. Transmission over frequency-selective channels is considered and the
effects of inter-frame interference and multiple access interference on the
performance of a generic Rake receiver are investigated for both synchronous
and asynchronous systems. Closed form (approximate) expressions for the
probability of error that are valid for various Rake combining schemes are
derived. The asynchronous system is modelled as a chip-synchronous system with
uniformly distributed timing jitter for the transmitted pulses of interfering
users. This model allows the analytical technique developed for the synchronous
case to be extended to the asynchronous case. An approximate closed-form
expression for the probability of bit error, expressed in terms of the
autocorrelation function of the transmitted pulse, is derived for the
asynchronous case. Then, transmission over an additive white Gaussian noise
channel is studied as a special case, and the effects of multiple-access
interference is investigated for both synchronous and asynchronous systems. The
analysis shows that the chip-synchronous assumption can result in
over-estimating the error probability, and the degree of over-estimation mainly
depends on the autocorrelation function of the ultra-wideband pulse and the
signal-to-interference-plus-noise-ratio of the system. Simulations studies
support the approximate analysis.Comment: To appear in the IEEE Transactions on Signal Processin
Impulse Radio Systems with Multiple Types of Ultra-Wideband Pulses
Spectral properties and performance of multi-pulse impulse radio
ultra-wideband systems with pulse-based polarity randomization are analyzed.
Instead of a single type of pulse transmitted in each frame, multiple types of
pulses are considered, which is shown to reduce the effects of multiple-access
interference. First, the spectral properties of a multi-pulse impulse radio
system is investigated. It is shown that the power spectral density is the
average of spectral contents of different pulse shapes. Then, approximate
closed-form expressions for bit error probability of a multi-pulse impulse
radio system are derived for RAKE receivers in asynchronous multiuser
environments. The theoretical and simulation results indicate that impulse
radio systems that are more robust against multiple-access interference than a
"classical" impulse radio system can be designed with multiple types of
ultra-wideband pulses.Comment: To be presented at the 2005 Conference on Information Sciences and
System
Performance of Bit Error Rate and Power Spectral Density of Ultra Wideband with Time Hopping Sequences.
This thesis focuses on several modulation methods for an ultra wideband (UWB) signal. These methods are pulse position modulation (PPM), binary phase shift keying (BPSK), on/off key shifting (OOK), and pulse amplitude modulation (PAM). In addition, time hopping is considered for these modulation schemes, where the capacity per time frame of time hopping PPM is studied using different spreading ratios. This thesis proves that with the addition of time hopping to all types of modulated UWB signals, the performance of power spectral density improves in all aspects, despite the increase of data per time frame. Note that despite the increase of data per frame, the bit error rate remains the same as standard non-time hopping UWB modulated signals
Comparison of Bit Error Rate and Power Spectral Density on the Ultra Wideband Impulse Radio Systems
Ultra-Wideband (UWB) is defined as a wireless transmission scheme that occupies a bandwidth of more than 25% of its center frequency. UWB Impulse Radio (UWB-IR) is a popular implementation of the UWB technology. In UWB-IR, information is encoded in baseband without any carrier modulation. Pulse shaping and baseband modulation scheme are two of the determinants on the performance of the UWB-IR.
In this thesis, both temporal and spectral characteristics of the UWB-IR are examined because all radio signals exist in both the time and frequency domains. Firstly, the bit error rate (BER) performance of the UWB-IR is investigated via simulation using three modulation schemes: Pulse position modulation (PPM), on-off shift keying (OOK), and binary phase shift keying (BPSK). The results are verified for three different pulse shaping named Gaussian first derivative, Gaussian second derivative, and return-to-zero (RZ) Manchester. Secondly, the effects of the UWB-IR parameters on the power spectral density (PSD) are investigated because PSD provides information on how the power is distributed over the radio frequency (RF) spectrum and determines the interference of UWB-IR and the existing systems to each other in the spectrum. The investigated UWB-IR parameters include pulse duration, pulse repetition rate, modulation scheme, and pseudorandom codes
Compressed sensing approach to ultra-wideband receiver design
One of the scarcest resources in the wireless communication system is the limited frequency spectrum. Many wireless communication systems are hindered by the bandwidth limitation and are not able to provide high speed communication. However, Ultra-wideband (UWB) communication promises a high speed communication because of its very wide bandwidth of 7.5GHz (3.1GHz-10.6GHz). The unprecedented bandwidth promises many advantages for the 21st century wireless communication system.
However, UWB has many hardware challenges, such as a very high speed sampling rate requirement for analog to digital conversion, channel estimation, and implementation challenges. In this thesis, a new method is proposed using compressed sensing (CS), a mathematical concept of sub-Nyquist rate sampling, to reduce the hardware complexity of the system. The method takes advantage of the unique signal structure of the UWB symbol. Also, a new digital implementation method for CS based UWB is proposed. Lastly, a comparative study is done of the CS-UWB hardware implementation methods.
Simulation results show that the application of compressed sensing using the proposed method significantly reduces the number of hardware complexity compared to the conventional method of using compressed sensing based UWB receiver
Sub-optimal Ultra-wide Band Receivers
Ultra-wide Band (UWB) has sparked a lot of interest lately from the industry and academia. The growing capacity of the wireless industry is requires a new communication system that satisfies the high data rate which does not interfere with existing RF systems. UWB promises to be this new technology. UWB also promises low power, low cost and flexibility. The UWB Channel opens up a huge new wireless channel with Giga Hertz Capacities as well as the highest spatial capacities measured in bits per hertz per square meter. When properly implemented UWB channel can share spectrum with traditional radio systems without causing harmful interference. In this thesis we studied and compared several reduced complexity sub-optimal Ultra-Wide Band receivers. These receivers include auto correlation receiver, the square value detector and the absolute value detector are studied. We consider OOK and PPM modulation schemes. We examine these schemes and the receivers on Gaussian and UWB indoor channels. We compare the performance with optimal receivers. A transmitter receiver system using 0.1us pulses implemented using existing hardware. A packet consisting of 24 bits were transmitted and the received signal could be verified in real time using a vector signal analyzer. The results show sub-optimal receivers provide a better trade off between robust, complexity and performance
Realization Limits of Impulse-Radio UWB Indoor Localization Systems
In this work, the realization limits of an impulse-based Ultra-Wideband (UWB) localization system for indoor applications have been thoroughly investigated and verified by measurements. The analysis spans from the position calculation algorithms, through hardware realization and modeling, up to the localization experiments conducted in realistic scenarios. The main focus was put on identification and characterization of limiting factors as well as developing methods to overcome them
- …