Verification and synthesis of asynchronous control circuits using petri net unfoldings

PhD ThesisDesign of asynchronous control circuits has traditionally been associated with application of formal methods. Event-based models, such as Petri nets, provide a compact and easy to understand way of specifying asynchronous behaviour. However, analysis of their behavioural properties is often hindered by the problem of exponential growth of reachable state space. This work proposes a new method for analysis of asynchronous circuit models based on Petri nets. The new approach is called PN-unfolding segment. It extends and improves existing Petri nets unfolding approaches. In addition, this thesis proposes a new analysis technique for Signal Transition Graphs along with an efficient verification technique which is also based on the Petri net unfolding. The former is called Full State Graph, the latter - STG-unfolding segment. The boolean logic synthesis is an integral part of the asynchronous circuit design process. In many cases, even if the verification of an asynchronous circuit specification has been performed successfully, it is impossible to obtain its implementation using existing methods because they are based on the reachability analysis. A new approach is proposed here for automated synthesis of speed-independent circuits based on the STG-unfolding segment constructed during the verification of the circuit's specification. Finally, this work presents experimental results showing the need for the new Petri net unfolding techniques and confirming the advantages of application of partial order approach to analysis, verification and synthesis of asynchronous circuits.The Research Committee, Newcastle University: Overseas Research Studentship Award

Hierarchical gate-level verification of speed-independent circuits

This paper presents a method for the verification of speed-independent circuits. The main contribution is the reduction of the circuit to a set of complex gates that makes the verification time complexity depend only on the number of state signals (C elements, RS flip-flops) of the circuit. Despite the reduction to complex gates, verification is kept exact. The specification of the environment only requires to describe the transitions of the input/output signals of the circuit and is allowed to express choice and non-determinism. Experimental results obtained from circuits with more than 500 gates show that the computational cost can be drastically reduced when using hierarchical verification.Peer ReviewedPostprint (published version

Physics-based passivity-preserving parameterized model order reduction for PEEC circuit analysis

The decrease of integrated circuit feature size and the increase of operating frequencies require 3-D electromagnetic methods, such as the partial element equivalent circuit (PEEC) method, for the analysis and design of high-speed circuits. Very large systems of equations are often produced by 3-D electromagnetic methods, and model order reduction (MOR) methods have proven to be very effective in combating such high complexity. During the circuit synthesis of large-scale digital or analog applications, it is important to predict the response of the circuit under study as a function of design parameters such as geometrical and substrate features. Traditional MOR techniques perform order reduction only with respect to frequency, and therefore the computation of a new electromagnetic model and the corresponding reduced model are needed each time a design parameter is modified, reducing the CPU efficiency. Parameterized model order reduction (PMOR) methods become necessary to reduce large systems of equations with respect to frequency and other design parameters of the circuit, such as geometrical layout or substrate characteristics. We propose a novel PMOR technique applicable to PEEC analysis which is based on a parameterization process of matrices generated by the PEEC method and the projection subspace generated by a passivity-preserving MOR method. The proposed PMOR technique guarantees overall stability and passivity of parameterized reduced order models over a user-defined range of design parameter values. Pertinent numerical examples validate the proposed PMOR approach

Timing verification of dynamically reconfigurable logic for Xilinx Virtex FPGA series

This paper reports on a method for extending existing VHDL design and verification software available for the Xilinx Virtex series of FPGAs. It allows the designer to apply standard hardware design and verification tools to the design of dynamically reconfigurable logic (DRL). The technique involves the conversion of a dynamic design into multiple static designs, suitable for input to standard synthesis and APR tools. For timing and functional verification after APR, the sections of the design can then be recombined into a single dynamic system. The technique has been automated by extending an existing DRL design tool named DCSTech, which is part of the Dynamic Circuit Switching (DCS) CAD framework. The principles behind the tools are generic and should be readily extensible to other architectures and CAD toolsets. Implementation of the dynamic system involves the production of partial configuration bitstreams to load sections of circuitry. The process of creating such bitstreams, the final stage of our design flow, is summarized

A design tool for high-resolution high-frequency cascade continuous- time Σ∆ modulators

Event: Microtechnologies for the New Millennium, 2007, Maspalomas, Gran Canaria, SpainThis paper introduces a CAD methodology to assist the de signer in the implementation of continuous-time (CT) cas- cade Σ∆ modulators. The salient features of this methodology ar e: (a) flexible behavioral modeling for optimum accuracy- efficiency trade-offs at different stages of the top-down synthesis process; (b) direct synthesis in the continuous-time domain for minimum circuit complexity and sensitivity; a nd (c) mixed knowledge-based and optimization-based architec- tural exploration and specification transmission for enhanced circuit performance. The applicability of this methodology will be illustrated via the design of a 12 bit 20 MHz CT Σ∆ modulator in a 1.2V 130nm CMOS technology.Ministerio de Ciencia y Educación TEC2004-01752/MICMinisterio de Industria, Turismo y Comercio FIT-330100-2006-134 SPIRIT Projec

Asynchronous techniques for system-on-chip design

SoC design will require asynchronous techniques as the large parameter variations across the chip will make it impossible to control delays in clock networks and other global signals efficiently. Initially, SoCs will be globally asynchronous and locally synchronous (GALS). But the complexity of the numerous asynchronous/synchronous interfaces required in a GALS will eventually lead to entirely asynchronous solutions. This paper introduces the main design principles, methods, and building blocks for asynchronous VLSI systems, with an emphasis on communication and synchronization. Asynchronous circuits with the only delay assumption of isochronic forks are called quasi-delay-insensitive (QDI). QDI is used in the paper as the basis for asynchronous logic. The paper discusses asynchronous handshake protocols for communication and the notion of validity/neutrality tests, and completion tree. Basic building blocks for sequencing, storage, function evaluation, and buses are described, and two alternative methods for the implementation of an arbitrary computation are explained. Issues of arbitration, and synchronization play an important role in complex distributed systems and especially in GALS. The two main asynchronous/synchronous interfaces needed in GALS-one based on synchronizer, the other on stoppable clock-are described and analyzed

Optimizing construction of scheduled data flow graph for on-line testability

The objective of this work is to develop a new methodology for behavioural synthesis using a flow of synthesis, better suited to the scheduling of independent calculations and non-concurrent online testing. The traditional behavioural synthesis process can be defined as the compilation of an algorithmic specification into an architecture composed of a data path and a controller. This stream of synthesis generally involves scheduling, resource allocation, generation of the data path and controller synthesis. Experiments showed that optimization started at the high level synthesis improves the performance of the result, yet the current tools do not offer synthesis optimizations that from the RTL level. This justifies the development of an optimization methodology which takes effect from the behavioural specification and accompanying the synthesis process in its various stages. In this paper we propose the use of algebraic properties (commutativity, associativity and distributivity) to transform readable mathematical formulas of algorithmic specifications into mathematical formulas evaluated efficiently. This will effectively reduce the execution time of scheduling calculations and increase the possibilities of testability

Technology Mapping for Circuit Optimization Using Content-Addressable Memory

The growing complexity of Field Programmable Gate Arrays (FPGA's) is leading to architectures with high input cardinality look-up tables (LUT's). This thesis describes a methodology for area-minimizing technology mapping for combinational logic, specifically designed for such FPGA architectures. This methodology, called LURU, leverages the parallel search capabilities of Content-Addressable Memories (CAM's) to outperform traditional mapping algorithms in both execution time and quality of results. The LURU algorithm is fundamentally different from other techniques for technology mapping in that LURU uses textual string representations of circuit topology in order to efficiently store and search for circuit patterns in a CAM. A circuit is mapped to the target LUT technology using both exact and inexact string matching techniques. Common subcircuit expressions (CSE's) are also identified and used for architectural optimization---a small set of CSE's is shown to effectively cover an average of 96% of the test circuits. LURU was tested with the ISCAS'85 suite of combinational benchmark circuits and compared with the mapping algorithms FlowMap and CutMap. The area reduction shown by LURU is, on average, 20% better compared to FlowMap and CutMap. The asymptotic runtime complexity of LURU is shown to be better than that of both FlowMap and CutMap