286 research outputs found

    A Dual Resonant Microstrip Antenna for UHF RFID in the Cold Chain Using Corrugated Fiberboard as a Substrate

    Get PDF
    Each year, about 76 million people contract a food borne illness in the United States; about 325,000 require hospitalization; and about 5,000 die. Tracking goods throughout the food supply chain increases the efficiency of recall of tainted goods and thus will help reducing food borne illness. Passive UHF RFID has been widely accepted to be a technology capable of increasing supply chain efficiency. Passive UHF RFID tags designed for supply chain application are tuned to work well on corrugated fiberboard boxes that are ubiquitous in the supply chain. Commercially available passive UHF RFID tags are either sensitive to the content/environmental conditions of the corrugated fiberboard box or economically unfeasible. In this thesis we propose a novel dual-resonant planar UHF RFID microstrip antenna designed to be both insensitive to the content/environmental conditions of the corrugated fiberboard box and economically feasible. We provide simulated performances and experimental validations to show that the proposed microstrip antenna design is a viable and technically superior solution compared to conventional stripline dipole antennas widely used in commodity tags

    A UHF RFID Reader Antenna with Tunable Axial Ratio and Fixed Beamwidth

    Get PDF
    A novel ultra-high-frequency (UHF) RFID reader antenna is proposed. The antenna has a unique property as being able to change its axial ratio (AR) without affecting its gain, beamwidth or impedance matching performance, enabling the isolated study of the effect of different axial ratios in RFID tag reading.This work was supported by EPSRC EP /S-19405/1 Channel Optimised Distributed Passive Sensor Networks

    An embroidered passive textile RFID tag based on a T-matched antenna

    Get PDF
    This paper addresses the design and fabrication of an embroidered textile RFID tag antenna. The main feature of this design is that we have embroidered an RFID chip on the textile support which avoids the use of metallic wires or soldering. The modeled equivalent circuit of the tag is presented to get physical insight into RFID tag antenna design. The detailed results given in this paper include the effect of the bending and the human body proximity on the antenna performance. It is shown that the bending does not introduce a conspicuous effect on the tags read range while the dissipative characteristics of the human body cause a gain and read range reduction. The proposed design may find applications in wearable devices dedicated to health monitoring applications.Peer ReviewedPostprint (author's final draft

    Multiport sensor RFIDs for wireless passive sensing of objects - Basic theory and early results

    Get PDF
    A new family of passive sensor radio-frequency identification devices is here proposed for applications in the context of wireless sensor networks. The new tags, working in the ultra-high frequency band, are able to detect the value or the change of some features of the tagged body without using any specific sensor. Such tags are provided with multiple chips embedded either within a cluster of cooperating antennas or in a single multiport antenna, and exploit the natural mismatch of the antenna input impedance caused by the change of the tagged object. A basic theory of multiport sensor tags is formulated with the purpose to describe the possible classification and detection performances in a unitary context. Some numerical examples and a first experiment corroborate the feasibility of the idea

    Designing UHF RFID tag antennas with Barcode shape for dual-technology identification

    Get PDF
    In this paper, a novel methodology to design Ultra High Frequency Radio-Frequency IDentification (UHF RFID) tag antennas with Barcode layout is proposed with the challenging goal of "fusing" both technologies in a single device. Specifically, after a brief recall of the well-known barcode standard, a procedure to design meandered barcode-shaped UHF RFID tags is introduced and discussed leveraging on electromagnetic evidence. The main steps of the proposed method are described by highlighting the constraints inherited by both the adopted technologies, as well as the useful opportunities to automatise the entire antenna design process after a preliminary simulation campaign through a full-wave simulator. Different RFID-Barcode tag antennas are designed, manufactured, and characterised in terms of maximum reading range and tag sensitivity. Obtained results demonstrate the validity of the proposed approach

    Evaluation of conductive threads for optimizing performance of embroidered RFID antennas

    Get PDF
    Radio frequency identification (RFID) refers to a technology that utilizes radio signals for identifying objects automatically. This technology consists of a reader that detects the objects and a transponder that gets attached to the object and it is called tag. The tag is an enclosure that houses the antenna and an IC that stores the necessary information on that object. This thesis focuses tag antennas made for embroidered RFID. Embroidered antennas are made by sewing antenna using conductive thread onto a fabric using a computerized sewing machine. This enables us to extend the field of RFID technologies to textiles. Conventional RFID systems that use metal conductors are easy to model but the same cannot be said for embroidered RFID. The reason being conductive threads and embroidered antennas don’t have definite conductivity. The conductivity of an embroidered antenna depends multiple factors like thread conductivity, thread density, stitch density, sewing pattern etc. The target of this thesis is experimenting with conductive threads physically and for their conductivity followed by eval-uating them for the use of embroidered RFID antenna fabrication for optimizing the perfor-mance. In this thesis, using same antenna pattern and technique, tags were fabricated from 6 differ-ent conductive threads onto the same cotton fabric. The conductive threads were investigated for their conductivity, thread thickness and their strength. The antennas were tested for their read range and the effect of different threads on the antenna were analysed. The threads with the highest conductive nature gave the highest read range of 6.2 meters. The threads were also evaluated for their usability for embroidery. Some threads were too thick, some had exposed structures leading to malfunction in the sewing machine and others were too thin and ripped easily during sewing. The selected thread should not only have great performance, but also it needs to be practical. It is seen that the conductivity of antenna and hence the performance is easily improved with using high conductive thread. After taking all the factors into account, finally a thread was selected that can be used to make high performance embroidered RFID antennas and also highly suitable for embroidery process. In the future, the same work can be revisited or extended to other more versatile and higher conductivity threads. Also, the advancement is embroidery techniques will allow for more con-ductive threads to be compatible for embroidery opening more options for optimization

    Target Read Operation of Passive Ultra High Frequency RFID Tag in a Multiple Tags Environment

    Get PDF
    Passive ultra-high frequency (UHF) radio frequency Identification (RFID) has emerged as a promising solution for many industrial applications. Passive UHF systems are relatively inexpensive to implement and monitor, as no line of sight is required for the communication. There are several advantages to using a passive RFID system. For example, no internal power source is required to activate the tags, and lower labor costs and efficient multitasking operations are expected in a long term scenario. However, due to factors such as tag-to-tag interference and inaccurate localization, RFID tags that are closely spaced together are difficult to detect and program accurately with unique identifiers. This thesis investigates two main ways to enable and improve multi-tag operations: physical tag placement and design of the near-field RFID reader antenna. First, several factors that affect the ability to encode a specific tag with unique information in the presence of other tags are investigated, such as reader power level, tag-to-antenna distance, tag-to-tag distance and tag orientation. A Full Factorial Design is carried out to study the effects of each of the factors and factor interactions. Results suggest a preliminary minimum tag-to-tag spacing which enables the maximum number of tagged items to be uniquely encoded without interference. In order to individually read each tag in a multi-tag form, an experimental device is built to enable controlled movement and positioning of the reader’s antenna to the location of each of the tags. The experimental device is also designed to test other mechanical means of isolating the tags, such as shielding and mechanical isolation of the tagged media. Furthermore, to test a second method of improving the efficacy of programming tags uniquely in a multi-tag environment, the reader’s antenna is redesigned to confine the electromagnetic field distribution to reduce the probability of activating non-targeted tags in the surrounding. Using the commercial software package ANSYS High Frequency Structural Solver (HFSS), the coupling interaction between the reader’s antenna and RFID tags was simulated to investigate the relative voltage induced in the target tag relative to each of the proximal tags. The new antenna is then fabricated and validated with the simulation results. With a better antenna design and ideals tag placement, the read operation of multiple tags can be improved and made more reliable. These findings can potentially expedite the process of field programming in item-level tagging and increase the throughput rate of unique tag encoding
    • …
    corecore