The efficient interleaving of digital-video-broadcasting-satellite 2nd generations system

The DVB-S2 system is designed as a toolbox to permit the execution of the satellite programs. Interleaver is an essential part of the DVB-S2 system. The current general block interleaver in DVB-S2 is not best, which leads to high BER and maybe not satisfy the requirements of the system. The purpose of this paper is to study the several interleaver types and comparative analyses are done between them to find which of these give better performance. Simulations results obtained prove that the 2D interleavers minimize BER more than other interleavers of DVB-S2. Further, the performance of 2D interleaver is better on a system that required a low SNR

Energy-efficient design and implementation of turbo codes for wireless sensor network

The objective of this thesis is to apply near Shannon limit Error-Correcting Codes (ECCs), particularly the turbo-like codes, to energy-constrained wireless devices, for the purpose of extending their lifetime. Conventionally, sophisticated ECCs are applied to applications, such as mobile telephone networks or satellite television networks, to facilitate long range and high throughput wireless communication. For low power applications, such as Wireless Sensor Networks (WSNs), these ECCs were considered due to their high decoder complexities. In particular, the energy efficiency of the sensor nodes in WSNs is one of the most important factors in their design. The processing energy consumption required by high complexity ECCs decoders is a significant drawback, which impacts upon the overall energy consumption of the system. However, as Integrated Circuit (IC) processing technology is scaled down, the processing energy consumed by hardware resources reduces exponentially. As a result, near Shannon limit ECCs have recently begun to be considered for use in WSNs to reduce the transmission energy consumption [1,2]. However, to ensure that the transmission energy consumption reduction granted by the employed ECC makes a positive improvement on the overall energy efficiency of the system, the processing energy consumption must still be carefully considered.The main subject of this thesis is to optimise the design of turbo codes at both an algorithmic and a hardware implementation level for WSN scenarios. The communication requirements of the target WSN applications, such as communication distance, channel throughput, network scale, transmission frequency, network topology, etc, are investigated. Those requirements are important factors for designing a channel coding system. Especially when energy resources are limited, the trade-off between the requirements placed on different parameters must be carefully considered, in order to minimise the overall energy consumption. Moreover, based on this investigation, the advantages of employing near Shannon limit ECCs in WSNs are discussed. Low complexity and energy-efficient hardware implementations of the ECC decoders are essential for the target applications

Advanced Modulation and Coding Technology Conference

The objectives, approach, and status of all current LeRC-sponsored industry contracts and university grants are presented. The following topics are covered: (1) the LeRC Space Communications Program, and Advanced Modulation and Coding Projects; (2) the status of four contracts for development of proof-of-concept modems; (3) modulation and coding work done under three university grants, two small business innovation research contracts, and two demonstration model hardware development contracts; and (4) technology needs and opportunities for future missions

Software implementation and performance of UMTS turbo code

In the recent years, there has been a proliferation of wireless standards in television, radio and mobile communications. As a result, compatibility issues have emerged in wireless networks. The size, cost and competitiveness set limitations on implementing systems compatible with multiple standards. This has motivated the concept of software defined radio which can support different standards by reloading the software and implementing computationally intensive parts on hardware, e.g., iterative codes. In a typical communication system, all the processing is done in the digital domain. The information is represented as a sequence of bits which is modulated on an analog waveform and transmitted over the communication channel. Due to channel induced impairments, the received signal may not be a true replica of the transmitted signal. Thus, some error control is required which is achieved by the use of channel coding schemes that protect the signal from the effects of channel and help to reduce the bit error rate (BER) and improve reliability of information transmission. Shannon gave the theoretical upper bound on the channel capacity for a given bandwidth, data rate and signal-to-noise ratio in 1940s but practical codes were unable to operate even close to the theoretical bound. Turbo codes were introduced in 1993 where a scheme was described that was able to operate very close to the Shannon limit. Turbo codes are widely used in latest wireless standards e.g. UMTS and LTE. A basic turbo encoder consists of two or more component encoders concatenated in parallel and separated by an interleaver. The turbo decoder uses soft decision to decode the bits and the decoding is done in an iterative fashion to increase reliability of the decision. In this thesis, the turbo code for the UMTS standard is implemented in MATLAB. Four versions of the Maximum Aposteriori Probability (MAP) algorithm are used in the implementation. The simulation results show that the performance of the turbo code improves by increasing the number of iterations. Also, better performance can be achieved by increasing the frame size or the interleaver size and increasing the signal power. Overall, the designing of turbo codes is a trade-off between energy efficiency, bandwidth efficiency, complexity and error performance

The Telecommunications and Data Acquisition Report

Archival reports on developments in programs managed by JPL's Office of Telecommunications and Data Acquisition (TDA) are presented. Activities of the Deep Space Network (DSN) and its associated Ground Communications Facility (GCF) related to DSN advanced systems, systems implementation, and DSN operations are addressed. In addition, recent developments in the NASA SETI (Search for Extraterrestrial Intelligence) sky survey are summarized

Proceedings of the Fifth International Mobile Satellite Conference 1997

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial communications services. While previous International Mobile Satellite Conferences have concentrated on technical advances and the increasing worldwide commercial activities, this conference focuses on the next generation of mobile satellite services. The approximately 80 papers included here cover sessions in the following areas: networking and protocols; code division multiple access technologies; demand, economics and technology issues; current and planned systems; propagation; terminal technology; modulation and coding advances; spacecraft technology; advanced systems; and applications and experiments

Rate enhancement and multi-relay selection schemes for application in wireless cooperative networks

In this thesis new methods are presented to achieve performance enhancement in wireless cooperative networks. In particular, techniques to improve transmission rate, mitigate asynchronous transmission and maximise end-to-end signal-to-noise ratio are described. An offset transmission scheme with full interference cancellation for a two-hop synchronous network with frequency flat links and four relays is introduced. This approach can asymptotically, as the symbol block size increases, achieve maximum transmission rate together with full cooperative diversity provided the destination node has multiple antennas. A novel full inter-relay interference cancellation method that also achieves asymptotically maximum rate and full cooperative diversity is then designed which only requires a single antenna at the destination node. Extension to asynchronous networks is then considered through the use of orthogonal frequency division multiplexing (OFDM) type transmission with a cyclic prefix, and interference cancellation techniques are designed for situations when synchronization errors are present in only the second hop or both the first and second hop. End-to-end bit error rate evaluations, with and without outer coding, are used to assess the performance of the various offset transmission schemes. Multi-relay selection methods for cooperative amplify and forward type networks are then studied in order to overcome the degradation of end-to-end bit error rate performance in single-relay selection networks when there are feedback errors in the destination to relay node links. Outage probability analysis for two and four relay selection is performed to show the advantage of multi-relay selection when no interference occurs and when adjacent cell interference is present both at the relay nodes and the destination node. Simulation studies are included which support the theoretical expressions. Finally, outage probability analysis of a cognitive amplify and forward type relay network with cooperation between certain secondary users, chosen by single and multi-relay (two and four) selection is presented. The cognitive relays are assumed to exploit an underlay approach, which requires adherence to an interference constraint on the primary user. The relay selection is performed either with a max-min strategy or one based on maximising exact end-to-end signal-to-noise ratio. The analyses are again confirmed by numerical evaluations