Effects of errorless learning on the acquisition of velopharyngeal movement control

Session 1pSC - Speech Communication: Cross-Linguistic Studies of Speech Sound Learning of the Languages of Hong Kong (Poster Session)The implicit motor learning literature suggests a benefit for learning if errors are minimized during practice. This study investigated whether the same principle holds for learning velopharyngeal movement control. Normal speaking participants learned to produce hypernasal speech in either an errorless learning condition (in which the possibility for errors was limited) or an errorful learning condition (in which the possibility for errors was not limited). Nasality level of the participants’ speech was measured by nasometer and reflected by nasalance scores (in %). Errorless learners practiced producing hypernasal speech with a threshold nasalance score of 10% at the beginning, which gradually increased to a threshold of 50% at the end. The same set of threshold targets were presented to errorful learners but in a reversed order. Errors were defined by the proportion of speech with a nasalance score below the threshold. The results showed that, relative to errorful learners, errorless learners displayed fewer errors (50.7% vs. 17.7%) and a higher mean nasalance score (31.3% vs. 46.7%) during the acquisition phase. Furthermore, errorless learners outperformed errorful learners in both retention and novel transfer tests. Acknowledgment: Supported by The University of Hong Kong Strategic Research Theme for Sciences of Learning © 2012 Acoustical Society of Americapublished_or_final_versio

A survey on artificial intelligence-based acoustic source identification

The concept of Acoustic Source Identification (ASI), which refers to the process of identifying noise sources has attracted increasing attention in recent years. The ASI technology can be used for surveillance, monitoring, and maintenance applications in a wide range of sectors, such as defence, manufacturing, healthcare, and agriculture. Acoustic signature analysis and pattern recognition remain the core technologies for noise source identification. Manual identification of acoustic signatures, however, has become increasingly challenging as dataset sizes grow. As a result, the use of Artificial Intelligence (AI) techniques for identifying noise sources has become increasingly relevant and useful. In this paper, we provide a comprehensive review of AI-based acoustic source identification techniques. We analyze the strengths and weaknesses of AI-based ASI processes and associated methods proposed by researchers in the literature. Additionally, we did a detailed survey of ASI applications in machinery, underwater applications, environment/event source recognition, healthcare, and other fields. We also highlight relevant research directions

Deep Learning-Based Machinery Fault Diagnostics

This book offers a compilation for experts, scholars, and researchers to present the most recent advancements, from theoretical methods to the applications of sophisticated fault diagnosis techniques. The deep learning methods for analyzing and testing complex mechanical systems are of particular interest. Special attention is given to the representation and analysis of system information, operating condition monitoring, the establishment of technical standards, and scientific support of machinery fault diagnosis

Change detection in combination with spatial models and its effectiveness on underwater scenarios

This thesis proposes a novel change detection approach for underwater scenarios and combines it with different especially developed spatial models, this allows accurate and spatially coherent detection of any moving objects with a static camera in arbitrary environments. To deal with the special problems of underwater imaging pre-segmentations based on the optical flow and other special adaptions were added to the change detection algorithm so that it can better handle typical underwater scenarios like a scene crowded by a whole fish swarm

Dynamics Of Flood Flow In Red River Basin

In recent decades, flooding has become a major issue in many areas of the Upper Midwest. Many rivers and streams in the region had considerable increases in mean annual peak flows during this period, which was driven by a combination of natural factors including discharge synchrony with the spring thaw, ice jams, glacial lake plain, and a decrease in gradient downstream. The Red River of the North is a prominent river in the United States and Canada\u27s Upper Midwest. It flows from its headwaters in Minnesota and North Dakota to Lake Winnipeg in Manitoba. The river is well-known for its spring floods, which can cause havoc on communities along its banks. There is an increasing need to improve the characterization and identification of precursors in the Red River basin that affect the hydrological conditions that cause spring snowmelt floods and improve predictions to reduce Red River flood damage. This dissertation has developed different research that concerns the dynamics of floods in the Red River basin by integrating hydrological, hydraulic, and machine-learning models. The primary objectives were to improve flood prediction accuracy by deriving the parameters of the Muskingum Routing method using discharge measurements obtained by an Autonomous Surface Vehicle, to predict scour potential of the river through HEC-RAS modeling, and to provide an estimate of the flood progression downstream based on the flow characteristics. The study also compared the effectiveness of Seasonal Autoregressive Integrated Moving Average (SARIMA), Random Forest (RF), and Long Short-Term Memory (LSTM) algorithms for flood prediction. Additionally, the research investigated the surface water area variation and response to wet and dry seasons across the entire Red River basin, which can inform the development of effective flood mitigation strategies. The results of this study contributed to a better understanding of flood control strategies in the Red River Basin and helped to inform policy decisions related to flood mitigation in the region. Ultimately, this research aimed to understand the complex dynamics of the RRB and derive hydrological and hydraulic models that could help to improve flood prediction. The first research developed a linear and nonlinear Muskingum model with lateral inflows for flood routing in the Red River Basin using Salp Swarm Algorithm (SSA). The distributed Muskingum model is introduced to improve the accuracy and efficiency of the calculations. The study focuses on developing a linear and nonlinear Muskingum model for the Grand Forks and Drayton USGS stations deriving the parameters of the Muskingum Routing method using discharge measurements based on spatial variable exponent parameters. The suggested approach minimizes the Sum of Square Errors (SSE) between observed and routed outflows. The results show for an icy river like Red River, the Muskingum method proposed is a convenient way to predict outflow hydrographs caused by snowmelt. The second study improved flood inundation mapping accuracy in flood-prone rivers, such as the Red River of the North, by using simulation tools in HEC-RAS for flood modeling and determining Manning\u27s n coefficient. An Autonomous Surface Vehicle (ASV) was used to collect bathymetry and discharge data, including a flood event with a 16.5-year return period in 2022. The results showed that Manning\u27s n-coefficient of 0.07 and 0.15 for the channel and overbanks, respectively, agreed well with the observed and simulated water level values under steady flow conditions. The study also demonstrated the efficiency of using ASVs for flood mapping and examined the scour potential and any local scour development in the streambed near the bridge piers. The third study of this dissertation used hourly level records from three USGS stations to evaluate water level predictions using three methods: SARIMA, RF, and LSTM. The LSTM method outperformed the other methods, demonstrating high precision for flood water level prediction. The results showed that the LSTM method was a reliable choice for predicting flood water levels up to one week in advance. This study contributes to the development of data-driven forecasting systems that provide cost-effective solutions and improved performance in simulating the complex physical processes of floods using mathematical expressions. This last study focused on the spatiotemporal dynamics of surface water area in the Red River Basin (RRB) by using a high-resolution global surface water dataset to investigate the changes in surface water extent from 1990 to 2019. The results showed that there were four distinct phases of variation in surface water: wetting (1990-2001), dry (2002-2005), recent wetting (2006-2013), and recent drying (2014-2019). The transition from bare land to permanent and seasonal water area was observed during the wetting phase, while the other phases experienced relatively little fluctuation. Overall, this study contributes to a better understanding of the spatiotemporal variation of surface water area in the RRB and provides insights into the impact of recent wetting and drying periods on the lakes and wetlands of the RRB

Algorithms for Fault Detection and Diagnosis

Due to the increasing demand for security and reliability in manufacturing and mechatronic systems, early detection and diagnosis of faults are key points to reduce economic losses caused by unscheduled maintenance and downtimes, to increase safety, to prevent the endangerment of human beings involved in the process operations and to improve reliability and availability of autonomous systems. The development of algorithms for health monitoring and fault and anomaly detection, capable of the early detection, isolation, or even prediction of technical component malfunctioning, is becoming more and more crucial in this context. This Special Issue is devoted to new research efforts and results concerning recent advances and challenges in the application of “Algorithms for Fault Detection and Diagnosis”, articulated over a wide range of sectors. The aim is to provide a collection of some of the current state-of-the-art algorithms within this context, together with new advanced theoretical solutions

SOLID-SHELL FINITE ELEMENT MODELS FOR EXPLICIT SIMULATIONS OF CRACK PROPAGATION IN THIN STRUCTURES

Crack propagation in thin shell structures due to cutting is conveniently simulated using explicit finite element approaches, in view of the high nonlinearity of the problem. Solidshell elements are usually preferred for the discretization in the presence of complex material behavior and degradation phenomena such as delamination, since they allow for a correct representation of the thickness geometry. However, in solid-shell elements the small thickness leads to a very high maximum eigenfrequency, which imply very small stable time-steps. A new selective mass scaling technique is proposed to increase the time-step size without affecting accuracy. New ”directional” cohesive interface elements are used in conjunction with selective mass scaling to account for the interaction with a sharp blade in cutting processes of thin ductile shells

Underwater Vehicles

For the latest twenty to thirty years, a significant number of AUVs has been created for the solving of wide spectrum of scientific and applied tasks of ocean development and research. For the short time period the AUVs have shown the efficiency at performance of complex search and inspection works and opened a number of new important applications. Initially the information about AUVs had mainly review-advertising character but now more attention is paid to practical achievements, problems and systems technologies. AUVs are losing their prototype status and have become a fully operational, reliable and effective tool and modern multi-purpose AUVs represent the new class of underwater robotic objects with inherent tasks and practical applications, particular features of technology, systems structure and functional properties

Machine learning methods for discriminating natural targets in seabed imagery

The research in this thesis concerns feature-based machine learning processes and methods for discriminating qualitative natural targets in seabed imagery. The applications considered, typically involve time-consuming manual processing stages in an industrial setting. An aim of the research is to facilitate a means of assisting human analysts by expediting the tedious interpretative tasks, using machine methods. Some novel approaches are devised and investigated for solving the application problems. These investigations are compartmentalised in four coherent case studies linked by common underlying technical themes and methods. The first study addresses pockmark discrimination in a digital bathymetry model. Manual identification and mapping of even a relatively small number of these landform objects is an expensive process. A novel, supervised machine learning approach to automating the task is presented. The process maps the boundaries of ≈ 2000 pockmarks in seconds - a task that would take days for a human analyst to complete. The second case study investigates different feature creation methods for automatically discriminating sidescan sonar image textures characteristic of Sabellaria spinulosa colonisation. Results from a comparison of several textural feature creation methods on sonar waterfall imagery show that Gabor filter banks yield some of the best results. A further empirical investigation into the filter bank features created on sonar mosaic imagery leads to the identification of a useful configuration and filter parameter ranges for discriminating the target textures in the imagery. Feature saliency estimation is a vital stage in the machine process. Case study three concerns distance measures for the evaluation and ranking of features on sonar imagery. Two novel consensus methods for creating a more robust ranking are proposed. Experimental results show that the consensus methods can improve robustness over a range of feature parameterisations and various seabed texture classification tasks. The final case study is more qualitative in nature and brings together a number of ideas, applied to the classification of target regions in real-world sonar mosaic imagery. A number of technical challenges arose and these were surmounted by devising a novel, hybrid unsupervised method. This fully automated machine approach was compared with a supervised approach in an application to the problem of image-based sediment type discrimination. The hybrid unsupervised method produces a plausible class map in a few minutes of processing time. It is concluded that the versatile, novel process should be generalisable to the discrimination of other subjective natural targets in real-world seabed imagery, such as Sabellaria textures and pockmarks (with appropriate features and feature tuning.) Further, the full automation of pockmark and Sabellaria discrimination is feasible within this framework

Advanced Knowledge Application in Practice

The integration and interdependency of the world economy leads towards the creation of a global market that offers more opportunities, but is also more complex and competitive than ever before. Therefore widespread research activity is necessary if one is to remain successful on the market. This book is the result of research and development activities from a number of researchers worldwide, covering concrete fields of research