Perception-motivated parallel algorithms for haptics

Negli ultimi anni l\u2019utilizzo di dispositivi aptici, atti cio\ue8 a riprodurre l\u2019interazione fisica con l\u2019ambiente remoto o virtuale, si sta diffondendo in vari ambiti della robotica e dell\u2019informatica, dai videogiochi alla chirurgia robotizzata eseguita in teleoperazione, dai cellulari alla riabilitazione. In questo lavoro di tesi abbiamo voluto considerare nuovi punti di vista sull\u2019argomento, allo scopo di comprendere meglio come riportare l\u2019essere umano, che \ue8 l\u2019unico fruitore del ritorno di forza, tattile e di telepresenza, al centro della ricerca sui dispositivi aptici. Allo scopo ci siamo focalizzati su due aspetti: una manipolazione del segnale di forza mutuata dalla percezione umana e l\u2019utilizzo di architetture multicore per l\u2019implementazione di algoritmi aptici e robotici. Con l\u2019aiuto di un setup sperimentale creato ad hoc e attraverso l\u2019utilizzo di un joystick con ritorno di forza a 6 gradi di libert\ue0, abbiamo progettato degli esperimenti psicofisici atti all\u2019identificazione di soglie differenziali di forze/coppie nel sistema mano-braccio. Sulla base dei risultati ottenuti abbiamo determinato una serie di funzioni di scalatura del segnale di forza, una per ogni grado di libert\ue0, che permettono di aumentare l\u2019abilit\ue0 umana nel discriminare stimoli differenti. L\u2019utilizzo di tali funzioni, ad esempio in teleoperazione, richiede la possibilit\ue0 di variare il segnale di feedback e il controllo del dispositivo sia in relazione al lavoro da svolgere, sia alle peculiari capacit\ue0 dell\u2019utilizzatore. La gestione del dispositivo deve quindi essere in grado di soddisfare due obbiettivi tendenzialmente in contrasto, e cio\ue8 il raggiungimento di alte prestazioni in termini di velocit\ue0, stabilit\ue0 e precisione, abbinato alla flessibilit\ue0 tipica del software. Una soluzione consiste nell\u2019affidare il controllo del dispositivo ai nuovi sistemi multicore che si stanno sempre pi\uf9 prepotentemente affacciando sul panorama informatico. Per far ci\uf2 una serie di algoritmi consolidati deve essere portata su sistemi paralleli. In questo lavoro abbiamo dimostrato che \ue8 possibile convertire facilmente vecchi algoritmi gi\ue0 implementati in hardware, e quindi intrinsecamente paralleli. Un punto da definire rimane per\uf2 quanto costa portare degli algoritmi solitamente descritti in VLSI e schemi in un linguaggio di programmazione ad alto livello. Focalizzando la nostra attenzione su un problema specifico, la pseudoinversione di matrici che \ue8 presente in molti algoritmi di dinamica e cinematica, abbiamo mostrato che un\u2019attenta progettazione e decomposizione del problema permette una mappatura diretta sulle unit\ue0 di calcolo disponibili. In aggiunta, l\u2019uso di parallelismo a livello di dati su macchine SIMD permette di ottenere buone prestazioni utilizzando semplici operazioni vettoriali come addizioni e shift. Dato che di solito tali istruzioni fanno parte delle implementazioni hardware la migrazione del codice risulta agevole. Abbiamo testato il nostro approccio su una Sony PlayStation 3 equipaggiata con un processore IBM Cell Broadband Engine.In the last years the use of haptic feedback has been used in several applications, from mobile phones to rehabilitation, from video games to robotic aided surgery. The haptic devices, that are the interfaces that create the stimulation and reproduce the physical interaction with virtual or remote environments, have been studied, analyzed and developed in many ways. Every innovation in the mechanics, electronics and technical design of the device it is valuable, however it is important to maintain the focus of the haptic interaction on the human being, who is the only user of force feedback. In this thesis we worked on two main topics that are relevant to this aim: a perception based force signal manipulation and the use of modern multicore architectures for the implementation of the haptic controller. With the help of a specific experimental setup and using a 6 dof haptic device we designed a psychophysical experiment aimed at identifying of the force/torque differential thresholds applied to the hand-arm system. On the basis of the results obtained we determined a set of task dependent scaling functions, one for each degree of freedom of the three-dimensional space, that can be used to enhance the human abilities in discriminating different stimuli. The perception based manipulation of the force feedback requires a fast, stable and configurable controller of the haptic interface. Thus a solution is to use new available multicore architectures for the implementation of the controller, but many consolidated algorithms have to be ported to these parallel systems. Focusing on specific problem, i.e. the matrix pseudoinversion, that is part of the robotics dynamic and kinematic computation, we showed that it is possible to migrate code that was already implemented in hardware, and in particular old algorithms that were inherently parallel and thus not competitive on sequential processors. The main question that still lies open is how much effort is required in order to write these algorithms, usually described in VLSI or schematics, in a modern programming language. We show that a careful task decomposition and design permit a mapping of the code on the available cores. In addition, the use of data parallelism on SIMD machines can give good performance when simple vector instructions such as add and shift operations are used. Since these instructions are present also in hardware implementations the migration can be easily performed. We tested our approach on a Sony PlayStation 3 game console equipped with IBM Cell Broadband Engine processor

A new parallelisation technique for heterogeneous CPUs

Parallelization has moved in recent years into the mainstream compilers, and the demand for parallelizing tools that can do a better job of automatic parallelization is higher than ever. During the last decade considerable attention has been focused on developing programming tools that support both explicit and implicit parallelism to keep up with the power of the new multiple core technology. Yet the success to develop automatic parallelising compilers has been limited mainly due to the complexity of the analytic process required to exploit available parallelism and manage other parallelisation measures such as data partitioning, alignment and synchronization. This dissertation investigates developing a programming tool that automatically parallelises large data structures on a heterogeneous architecture and whether a high-level programming language compiler can use this tool to exploit implicit parallelism and make use of the performance potential of the modern multicore technology. The work involved the development of a fully automatic parallelisation tool, called VSM, that completely hides the underlying details of general purpose heterogeneous architectures. The VSM implementation provides direct and simple access for users to parallelise array operations on the Cell’s accelerators without the need for any annotations or process directives. This work also involved the extension of the Glasgow Vector Pascal compiler to work with the VSM implementation as a one compiler system. The developed compiler system, which is called VP-Cell, takes a single source code and parallelises array expressions automatically. Several experiments were conducted using Vector Pascal benchmarks to show the validity of the VSM approach. The VP-Cell system achieved significant runtime performance on one accelerator as compared to the master processor’s performance and near-linear speedups over code runs on the Cell’s accelerators. Though VSM was mainly designed for developing parallelising compilers it also showed a considerable performance by running C code over the Cell’s accelerators

Protocol Layering and Internet Policy

An architectural principle known as protocol layering is widely recognized as one of the foundations of the Internet’s success. In addition, some scholars and industry participants have urged using the layers model as a central organizing principle for regulatory policy. Despite its importance as a concept, a comprehensive analysis of protocol layering and its implications for Internet policy has yet to appear in the literature. This Article attempts to correct this omission. It begins with a detailed description of the way the five-layer model developed, introducing protocol layering’s central features, such as the division of functions across layers, information hiding, peer communication, and encapsulation. It then discusses the model’s implications for whether particular functions are performed at the edge or in the core of the network, contrasts the model with the way that layering has been depicted in the legal commentary, and analyzes attempts to use layering as a basis for competition policy. Next the Article identifies certain emerging features of the Internet that are placing pressure on the layered model, including WiFi routers, network-based security, modern routing protocols, and wireless broadband. These developments illustrate how every architecture inevitably limits functionality as well as the architecture’s ability to evolve over time in response to changes in the technological and economic environment. Together these considerations support adopting a more dynamic perspective on layering and caution against using layers as a basis for a regulatory mandate for fear of cementing the existing technology into place in a way that prevents the network from innovating and evolving in response to shifts in the underlying technology and consumer demand