501 research outputs found

    Digital and Mixed Domain Hardware Reduction Algorithms and Implementations for Massive MIMO

    Get PDF
    Emerging 5G and 6G based wireless communications systems largely rely on multiple-input-multiple-output (MIMO) systems to reduce inherently extensive path losses, facilitate high data rates, and high spatial diversity. Massive MIMO systems used in mmWave and sub-THz applications consists of hundreds perhaps thousands of antenna elements at base stations. Digital beamforming techniques provide the highest flexibility and better degrees of freedom for phased antenna arrays as compared to its analog and hybrid alternatives but has the highest hardware complexity. Conventional digital beamformers at the receiver require a dedicated analog to digital converter (ADC) for every antenna element, leading to ADCs for elements. The number of ADCs is the key deterministic factor for the power consumption of an antenna array system. The digital hardware consists of fast Fourier transform (FFT) cores with a multiplier complexity of (N log2N) for an element system to generate multiple beams. It is required to reduce the mixed and digital hardware complexities in MIMO systems to reduce the cost and the power consumption, while maintaining high performance. The well-known concept has been in use for ADCs to achieve reduced complexities. An extension of the architecture to multi-dimensional domain is explored in this dissertation to implement a single port ADC to replace ADCs in an element system, using the correlation of received signals in the spatial domain. This concept has applications in conventional uniform linear arrays (ULAs) as well as in focal plane array (FPA) receivers. Our analysis has shown that sparsity in the spatio-temporal frequency domain can be exploited to reduce the number of ADCs from N to where . By using the limited field of view of practical antennas, multiple sub-arrays are combined without interferences to achieve a factor of K increment in the information carrying capacity of the ADC systems. Applications of this concept include ULAs and rectangular array systems. Experimental verifications were done for a element, 1.8 - 2.1 GHz wideband array system to sample using ADCs. This dissertation proposes that frequency division multiplexing (FDM) receiver outputs at an intermediate frequency (IF) can pack multiple (M) narrowband channels with a guard band to avoid interferences. The combined output is then sampled using a single wideband ADC and baseband channels are retrieved in the digital domain. Measurement results were obtained by employing a element, 28 GHz antenna array system to combine channels together to achieve a 75% reduction of ADC requirement. Implementation of FFT cores in the digital domain is not always exact because of the finite precision. Therefore, this dissertation explores the possibility of approximating the discrete Fourier transform (DFT) matrix to achieve reduced hardware complexities at an allowable cost of accuracy. A point approximate DFT (ADFT) core was implemented on digital hardware using radix-32 to achieve savings in cost, size, weight and power (C-SWaP) and synthesized for ASIC at 45-nm technology

    IMPROVING THE PERFORMANCE OF 3-D SENSOR ARRAY BY ROTATION

    Get PDF
    ABSTRACT In this paper, a method is proposed to improve the performance of 3

    A Multi-Stage Adaptive Sampling Scheme for Passivity Characterization of Large-Scale Macromodels

    Get PDF
    This paper proposes a hierarchical adaptive sampling scheme for passivity characterization of large-scale linear lumped macromodels. Here, large-scale is intended both in terms of dynamic order and especially number of input/output ports. Standard passivity characterization approaches based on spectral properties of associated Hamiltonian matrices are either inefficient or non-applicable for large-scale models, due to an excessive computational cost. This paper builds on existing adaptive sampling methods and proposes a hybrid multi-stage algorithm that is able to detect the passivity violations with limited computing resources. Results from extensive testing demonstrate a major reduction in computational requirements with respect to competing approaches.Comment: Submitted to the IEEE Transactions on Components, Packaging and Manufacturing Technolog

    Computer aided design

    Get PDF
    technical reportThe report is based on the proposal submitted to the National Science Foundation in September 1981, as part of the Coordinated Experimental Computer Science Research Program. The sections covering the budget and biographical data on the senior research personnel have not been included. Also, the section describing the department facilities at the time of the proposal submission is not included, because it would be only of historical interest

    CYBER 200 Applications Seminar

    Get PDF
    Applications suited for the CYBER 200 digital computer are discussed. Various areas of application including meteorology, algorithms, fluid dynamics, monte carlo methods, petroleum, electronic circuit simulation, biochemistry, lattice gauge theory, economics and ray tracing are discussed

    The 1992 4th NASA SERC Symposium on VLSI Design

    Get PDF
    Papers from the fourth annual NASA Symposium on VLSI Design, co-sponsored by the IEEE, are presented. Each year this symposium is organized by the NASA Space Engineering Research Center (SERC) at the University of Idaho and is held in conjunction with a quarterly meeting of the NASA Data System Technology Working Group (DSTWG). One task of the DSTWG is to develop new electronic technologies that will meet next generation electronic data system needs. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The NASA SERC is proud to offer, at its fourth symposium on VLSI design, presentations by an outstanding set of individuals from national laboratories, the electronics industry, and universities. These speakers share insights into next generation advances that will serve as a basis for future VLSI design

    Enforcing passivity of parameterized LTI macromodels via Hamiltonian-driven multivariate adaptive sampling

    Get PDF
    We present an algorithm for passivity verification and enforcement of multivariate macromodels whose state-space matrices depend in closed form on a set of external or design parameters. Uniform passivity throughout the parameter space is a fundamental requirement of parameterized macromodels of physically passive structures, that must be guaranteed during model generation. Otherwise, numerical instabilities may occur, due to the ability of non-passive models to generate energy. In this work, we propose the first available algorithm that, starting from a generic parameter-depedent state-space model, identifies the regions in the frequency-parameter space where the model behaves locally as a non-passive system. The approach we pursue is based on an adaptive sampling scheme in the parameter space, which iteratively constructs and perturbs the eigenvalue spectrum of suitable Skew-Hamiltonian/Hamiltonian (SHH) pencils, with the objective of identifying the regions where some of these eigenvalues become purely imaginary, thus pinpointing local passivity violations. The proposed scheme is able to detect all relevant violations. An outer iterative perturbation method is then applied to the model coefficients in order to remove such violations and achieve uniform passivity. Although a formal proof of global convergence is not available, the effectiveness of the proposed implementation of the passivity verification and enforcement schemes is demonstrated on several examples

    VLSI Design

    Get PDF
    This book provides some recent advances in design nanometer VLSI chips. The selected topics try to present some open problems and challenges with important topics ranging from design tools, new post-silicon devices, GPU-based parallel computing, emerging 3D integration, and antenna design. The book consists of two parts, with chapters such as: VLSI design for multi-sensor smart systems on a chip, Three-dimensional integrated circuits design for thousand-core processors, Parallel symbolic analysis of large analog circuits on GPU platforms, Algorithms for CAD tools VLSI design, A multilevel memetic algorithm for large SAT-encoded problems, etc

    Approaches to parallel performance prediction

    Get PDF

    Multiple View 3D Reconstruction of Micro- to Nano-Scopic Specimens

    Get PDF
    Range images and 3D modeling are often utilized on large scale specimens, but have been somewhat overlooked on the microscopic scale. This thesis concentrates on overcoming some of the difficulties of capturing images and creating both 3D models and 2D range images on this scale. During the scope of this thesis we take a deeper look into the optical mechanics of the laser scanning confocal microscope (LSCM) and scanning electron microscope (SEM) to understand the formation of the images and use that information to create our algorithms. With the use of the LSCM we can obtain a stack of 2D images of microscopic specimens. Our algorithm is able to process that stack of images and obtain both a 2D range image and a 3D model of a specimen from a single view. Through the use of computational methods and a set of eucentrically tilted images from the SEM we are able to obtain a surface point cloud of the specimen being modeled. By rotating the specimen and imaging it from several different angles a complete 3D model can be obtained. Through the implementation of our LSCM algorithm we have been able to obtain highly complete 3D reconstructions of both industrial and biological specimens of multiple size and shapes. The LSCM results produced and illustrated in this thesis exceed that of the current software available for producing both range images and 3D models. The results obtained from the SEM algorithm are a bit more modest yet offer an important understanding of the 3D characteristics of the specimens modeled. The point clouds produced and illustrated in this thesis show the accurate reconstruction of multiple points in a 3D space and when coupled with the 2D images produced by the SEM can help offer better depth understanding and measurement of features located on the specimen. Through the course of this thesis we have solved a few of the problems associated with 3D modeling on the microscopic level and offered a very good starting point from which to build upon. These reconstruction methods can be utilized individually or together for the use of better understanding and mapping microscopic organisms, reverse engineering, and quality control checks of microscopic parts
    • …
    corecore