Energy Saving Techniques for Phase Change Memory (PCM)

In recent years, the energy consumption of computing systems has increased and a large fraction of this energy is consumed in main memory. Towards this, researchers have proposed use of non-volatile memory, such as phase change memory (PCM), which has low read latency and power; and nearly zero leakage power. However, the write latency and power of PCM are very high and this, along with limited write endurance of PCM present significant challenges in enabling wide-spread adoption of PCM. To address this, several architecture-level techniques have been proposed. In this report, we review several techniques to manage power consumption of PCM. We also classify these techniques based on their characteristics to provide insights into them. The aim of this work is encourage researchers to propose even better techniques for improving energy efficiency of PCM based main memory.Comment: Survey, phase change RAM (PCRAM

QoS-aware mechanisms for improving cost-efficiency of datacenters

Warehouse Scale Computers (WSCs) promise high cost-efficiency by amortizing power, cooling, and management overheads. WSCs today host a large variety of jobs with two broad performance requirements categories: latency-critical (LC) and best-effort (BE). Ideally, to fully utilize all hardware resources, WSC operators can simply fill all the nodes with computing jobs. Unfortunately, because colocated jobs contend for shared resources, systems with high loads often experience performance degradation, which negatively impacts the Quality of Service (QoS) for LC jobs. In fact, service providers usually over-provision resources to avoid any interference with LC jobs, leading to significant resource inefficiencies. In this dissertation, I explore opportunities across different system-abstraction layers to improve the cost-efficiency of dataceters by increasing resource utilization of WSCs with little or no impact on the performance of LC jobs. The dissertation has three main components. First, I explore opportunities to improve the throughput of multicore systems by reducing the performance variation of LC jobs. The main insight is that by reshaping the latency distribution curve, performance headroom of LC jobs can be effectively converted to improved BE throughput. I develop, implement, and evaluate a runtime system that achieves this goal with existing hardware. I leverage the cache partitioning, per-core frequency scaling, and thread masking of server processors. Evaluation results show the proposed solution enables 30% higher system throughput compared to solutions proposed in prior works while maintaining at least as good QoS for LC jobs. Second, I study resource contention in near-future heterogeneous memory architectures (HMA). This study is motivated by recent developments in non-volatile memory (NVM) technologies, which enable higher storage density at the cost of same performance. To understand the performance and QoS impact of HMAs, I design and implement a performance emulator in the Linux kernel that runs unmodified workloads with high accuracy, low overhead, and complete transparency. I further propose and evaluate multiple data and resource management QoS mechanisms, such as locality-aware page admission, occupancy management, and write buffer jailing. Third, I focus on accelerated machine learning (ML) systems. By profiling the performance of production workloads and accelerators, I show that accelerated ML tasks are highly sensitive to main memory interference due to fine-grained interaction between CPU and accelerator tasks. As a result, memory resource contention can significantly decreases the performance and efficiency gains of accelerators. I propose a runtime system that leverages existing hardware capabilities and show 17% higher system efficiency compared to previous approaches. This study further exposes opportunities for future processor architecturesElectrical and Computer Engineerin

SEDEA: A sensible approach to account DRAM energy in multicore systems

As the energy cost in todays computing systems keeps increasing, measuring the energy becomes crucial in many scenarios. For instance, due to the fact that the operational cost of datacenters largely depends on the energy consumed by the applications executed, end users should be charged for the energy consumed, which requires a fair and consistent energy measuring approach. However, the use of multicore system complicates per-task energy measurement as the increased Thread Level Parallelism (TLP) allows several tasks to run simultaneously sharing resources. Therefore, the energy usage of each task is hard to determine due to interleaved activities and mutual interferences. To this end, Per-Task Energy Metering (PTEM) has been proposed to measure the actual energy of each task based on their resource utilization in a workload. However, the measured energy depends on the interferences from co-running tasks sharing the resources, and thus fails to provide the consistency across executions. Therefore, Sensible Energy Accounting (SEA) has been proposed to deliver an abstraction of the energy consumption based on a particular allocation of resources to a task.In this work we provide a realization of SEA for the DRAM memory system, SEDEA, where we account a task for the DRAM energy it would have consumed when running in isolation with a fraction of the on-chip shared cache. SEDEA is a mechanism to sensibly account for the DRAM energy of a task based on predicting its memory behavior. Our results show that SEDEA provides accurate estimates, yet with low-cost, beating existing per-task energy models, which do not target accounting energy in multicore system. We also provide a use case showing that SEDEA can be used to guide shared cache and memory bank partition schemes to save energy.This work has been supported by the RoMoL ERC Advanced Grant (GA 321253) and National Key R&D Program of China under No.2016YFB1000204, by the European HiPEAC Network of Excellence, by the Spanish Ministry of Science and Innovation (contracts TIN2015-65316-P), by Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272) and by the IBM-BSC Deep Learning Center initiative. Also by the major scientific and technological project of Guangdong province (2014B010115003), and NSFC under grant no 61702495, 61672511. M. Moret´o has been partially supported by the Ministry of Economy and Competitiveness under Juan de la Cierva postdoctoral fellowship number JCI- 2012-15047. J. Abella has been partially supported by the Ministry of Economy and Competitiveness under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717Peer ReviewedPostprint (author's final draft

Adaptive memory hierarchies for next generation tiled microarchitectures

Les últimes dècades el rendiment dels processadors i de les memòries ha millorat a diferent ritme, limitant el rendiment dels processadors i creant el conegut memory gap. Sol·lucionar aquesta diferència de rendiment és un camp d'investigació d'actualitat i que requereix de noves sol·lucions. Una sol·lució a aquest problema són les memòries “cache”, que permeten reduïr l'impacte d'unes latències de memòria creixents i que conformen la jerarquia de memòria. La majoria de d'organitzacions de les “caches” estan dissenyades per a uniprocessadors o multiprcessadors tradicionals. Avui en dia, però, el creixent nombre de transistors disponible per xip ha permès l'aparició de xips multiprocessador (CMPs). Aquests xips tenen diferents propietats i limitacions i per tant requereixen de jerarquies de memòria específiques per tal de gestionar eficientment els recursos disponibles. En aquesta tesi ens hem centrat en millorar el rendiment i la eficiència energètica de la jerarquia de memòria per CMPs, des de les “caches” fins als controladors de memòria. A la primera part d'aquesta tesi, s'han estudiat organitzacions tradicionals per les “caches” com les privades o compartides i s'ha pogut constatar que, tot i que funcionen bé per a algunes aplicacions, un sistema que s'ajustés dinàmicament seria més eficient. Tècniques com el Cooperative Caching (CC) combinen els avantatges de les dues tècniques però requereixen un mecanisme centralitzat de coherència que té un consum energètic molt elevat. És per això que en aquesta tesi es proposa el Distributed Cooperative Caching (DCC), un mecanisme que proporciona coherència en CMPs i aplica el concepte del cooperative caching de forma distribuïda. Mitjançant l'ús de directoris distribuïts s'obté una sol·lució més escalable i que, a més, disposa d'un mecanisme de marcatge més flexible i eficient energèticament. A la segona part, es demostra que les aplicacions fan diferents usos de la “cache” i que si es realitza una distribució de recursos eficient es poden aprofitar els que estan infrautilitzats. Es proposa l'Elastic Cooperative Caching (ElasticCC), una organització capaç de redistribuïr la memòria “cache” dinàmicament segons els requeriments de cada aplicació. Una de les contribucions més importants d'aquesta tècnica és que la reconfiguració es decideix completament a través del maquinari i que tots els mecanismes utilitzats es basen en estructures distribuïdes, permetent una millor escalabilitat. ElasticCC no només és capaç de reparticionar les “caches” segons els requeriments de cada aplicació, sinó que, a més a més, és capaç d'adaptar-se a les diferents fases d'execució de cada una d'elles. La nostra avaluació també demostra que la reconfiguració dinàmica de l'ElasticCC és tant eficient que gairebé proporciona la mateixa taxa de fallades que una configuració amb el doble de memòria.Finalment, la tesi es centra en l'estudi del comportament de les memòries DRAM i els seus controladors en els CMPs. Es demostra que, tot i que els controladors tradicionals funcionen eficientment per uniprocessadors, en CMPs els diferents patrons d'accés obliguen a repensar com estan dissenyats aquests sistemes. S'han presentat múltiples sol·lucions per CMPs però totes elles es veuen limitades per un compromís entre el rendiment global i l'equitat en l'assignació de recursos. En aquesta tesi es proposen els Thread Row Buffers (TRBs), una zona d'emmagatenament extra a les memòries DRAM que permetria guardar files de dades específiques per a cada aplicació. Aquest mecanisme permet proporcionar un accés equitatiu a la memòria sense perjudicar el seu rendiment global. En resum, en aquesta tesi es presenten noves organitzacions per la jerarquia de memòria dels CMPs centrades en la escalabilitat i adaptativitat als requeriments de les aplicacions. Els resultats presentats demostren que les tècniques proposades proporcionen un millor rendiment i eficiència energètica que les millors tècniques existents fins a l'actualitat.Processor performance and memory performance have improved at different rates during the last decades, limiting processor performance and creating the well known "memory gap". Solving this performance difference is an important research field and new solutions must be proposed in order to have better processors in the future. Several solutions exist, such as caches, that reduce the impact of longer memory accesses and conform the system memory hierarchy. However, most of the existing memory hierarchy organizations were designed for single processors or traditional multiprocessors. Nowadays, the increasing number of available transistors has allowed the apparition of chip multiprocessors, which have different constraints and require new ad-hoc memory systems able to efficiently manage memory resources. Therefore, in this thesis we have focused on improving the performance and energy efficiency of the memory hierarchy of chip multiprocessors, ranging from caches to DRAM memories. In the first part of this thesis we have studied traditional cache organizations such as shared or private caches and we have seen that they behave well only for some applications and that an adaptive system would be desirable. State-of-the-art techniques such as Cooperative Caching (CC) take advantage of the benefits of both worlds. This technique, however, requires the usage of a centralized coherence structure and has a high energy consumption. Therefore we propose the Distributed Cooperative Caching (DCC), a mechanism to provide coherence to chip multiprocessors and apply the concept of cooperative caching in a distributed way. Through the usage of distributed directories we obtain a more scalable solution and, in addition, has a more flexible and energy-efficient tag allocation method. We also show that applications make different uses of cache and that an efficient allocation can take advantage of unused resources. We propose Elastic Cooperative Caching (ElasticCC), an adaptive cache organization able to redistribute cache resources dynamically depending on application requirements. One of the most important contributions of this technique is that adaptivity is fully managed by hardware and that all repartitioning mechanisms are based on distributed structures, allowing a better scalability. ElasticCC not only is able to repartition cache sizes to application requirements, but also is able to dynamically adapt to the different execution phases of each thread. Our experimental evaluation also has shown that the cache partitioning provided by ElasticCC is efficient and is almost able to match the off-chip miss rate of a configuration that doubles the cache space. Finally, we focus in the behavior of DRAM memories and memory controllers in chip multiprocessors. Although traditional memory schedulers work well for uniprocessors, we show that new access patterns advocate for a redesign of some parts of DRAM memories. Several organizations exist for multiprocessor DRAM schedulers, however, all of them must trade-off between memory throughput and fairness. We propose Thread Row Buffers, an extended storage area in DRAM memories able to store a data row for each thread. This mechanism enables a fair memory access scheduling without hurting memory throughput. Overall, in this thesis we present new organizations for the memory hierarchy of chip multiprocessors which focus on the scalability and of the proposed structures and adaptivity to application behavior. Results show that the presented techniques provide a better performance and energy-efficiency than existing state-of-the-art solutions