1,344 research outputs found
Automation, Protection and Control of Substation Based on IEC 61850
Reliability of power system protection system has been a key issue in the substation operation due to the use of multi-vendor equipment of proprietary features, environmental issues, and complex fault diagnosis. Failure to address these issues could have a significant effect on the performance of the entire electricity grid. With the introduction of IEC 61850 standard, substation automation system (SAS) has significantly altered the scenario in utilities and industries as indicated in this thesis
Deep Space Network information system architecture study
The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control
Ethernet - a survey on its fields of application
During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application field’s requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal
Issues in designing transport layer multicast facilities
Multicasting denotes a facility in a communications system for providing efficient delivery from a message's source to some well-defined set of locations using a single logical address. While modem network hardware supports multidestination delivery, first generation Transport Layer protocols (e.g., the DoD Transmission Control Protocol (TCP) (15) and ISO TP-4 (41)) did not anticipate the changes over the past decade in underlying network hardware, transmission speeds, and communication patterns that have enabled and driven the interest in reliable multicast. Much recent research has focused on integrating the underlying hardware multicast capability with the reliable services of Transport Layer protocols. Here, we explore the communication issues surrounding the design of such a reliable multicast mechanism. Approaches and solutions from the literature are discussed, and four experimental Transport Layer protocols that incorporate reliable multicast are examined
Future benefits and applications of intelligent on-board processing to VSAT services
The trends and roles of VSAT services in the year 2010 time frame are examined based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified
Recommended from our members
Converged IP-over-standard ethernet progress control networks for hydrocarbon process automation applications controllers
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The maturity level of Internet Protocol (IP) and the emergence of standard Ethernet interfaces of Hydrocarbon Process Automation Application (HPAA) present a real opportunity to combine independent industrial applications onto an integrated IP based network platform. Quality of Service (QoS) for IP over Ethernet has the strength to regulate traffic mix and support timely delivery. The combinations of these technologies lend themselves to provide a platform to support HPAA applications across Local Area Network (LAN) and Wide Area Network (WAN) networks. HPAA systems are composed of sensors, actuators, and logic solvers networked together to form independent control system network platforms. They support hydrocarbon plants operating under critical conditions that — if not controlled — could become dangerous to people, assets and the environment. This demands high speed networking which is triggered by the need to capture data with higher frequency rate at a finer granularity. Nevertheless, existing HPAA network infrastructure is based on unique autonomous systems, which has resulted in multiple, parallel and separate networks with limited interconnectivity supporting different functions. This created increased complexity in integrating various applications and resulted higher costs in the technology life cycle total ownership. To date, the concept of consolidating HPAA into a converged IP network over standard Ethernet has not yet been explored. This research aims to explore and develop the HPAA Process Control Systems (PCS) in a Converged Internet Protocol (CIP) using experimental and simulated networks case studies. Results from experimental and simulation work showed encouraging outcomes and provided a good argument for supporting the co-existence of HPAA and non-HPAA applications taking into consideration timeliness and reliability requirements. This was achieved by invoking priority based scheduling with the highest priority being awarded to PCS among other supported services such as voice, multimedia streams and other applications. HPAA can benefit from utilizing CIP over Ethernet by reducing the number of interdependent HPAA PCS networks to a single uniform and standard network. In addition, this integrated infrastructure offers a platform for additional support services such as multimedia streaming, voice, and data. This network‐based model manifests itself to be integrated with remote control system platform capabilities at the end user's desktop independent of space and time resulting in the concept of plant virtualization
Teleoperation of passivity-based model reference robust control over the internet
This dissertation offers a survey of a known theoretical approach and novel experimental results in establishing a live communication medium through the internet to host a virtual communication environment for use in Passivity-Based Model Reference Robust Control systems with delays. The controller which is used as a carrier to support a robust communication between input-to-state stability is designed as a control strategy that passively compensates for position errors that arise during contact tasks and strives to achieve delay-independent stability for controlling of aircrafts or other mobile objects. Furthermore the controller is used for nonlinear systems, coordination of multiple agents, bilateral teleoperation, and collision avoidance thus maintaining a communication link with an upper bound of constant delay is crucial for robustness and stability of the overall system. For utilizing such framework an elucidation can be formulated by preparing site survey for analyzing not only the geographical distances separating the nodes in which the teleoperation will occur but also the communication parameters that define the virtual topography that the data will travel through. This survey will first define the feasibility of the overall operation since the teleoperation will be used to sustain a delay based controller over the internet thus obtaining a hypothetical upper bound for the delay via site survey is crucial not only for the communication system but also the delay is required for the design of the passivity-based model reference robust control. Following delay calculation and measurement via site survey, bandwidth tests for unidirectional and bidirectional communication is inspected to ensure that the speed is viable to maintain a real-time connection. Furthermore from obtaining the results it becomes crucial to measure the consistency of the delay throughout a sampled period to guarantee that the upper bound is not breached at any point within the communication to jeopardize the robustness of the controller. Following delay analysis a geographical and topological overview of the communication is also briefly examined via a trace-route to understand the underlying nodes and their contribution to the delay and round-trip consistency. To accommodate the communication channel for the controller the input and output data from both nodes need to be encapsulated within a transmission control protocol via a multithreaded design of a robust program within the C language. The program will construct a multithreaded client-server relationship in which the control data is transmitted. For added stability and higher level of security the channel is then encapsulated via an internet protocol security by utilizing a protocol suite for protecting the communication by authentication and encrypting each packet of the session using negotiation of cryptographic keys during each session
- …