13 research outputs found
Blind identification of possibly under-determined convolutive MIMO systems
Blind identi¯cation of a Linear Time Invariant (LTI) Multiple-Input Multiple-Output (MIMO) system is of great importance in many applications, such as speech processing, multi-access communication, multi-sensor sonar/radar systems, and biomedical applications. The objective of blind identi¯cation for a MIMO system is to identify an unknown system, driven by Ni unobservable inputs, based on the No system outputs. We ¯rst present a novel blind approach for the identi¯cation of a over-determined (No ¸ Ni) MIMO system driven by white, mutually independent unobservable inputs. Samples of the system frequency response are obtained based on Parallel Factorization (PARAFAC) of three- or four-way tensors constructed respectively based on third- or fourth-order cross-spectra of the system outputs. We show that the information available in the higher-order spectra allows for the system response to be identi¯ed up to a constant scaling and permutation ambiguities and a linear phase ambiguity. Important features of the proposed approaches are that they do not require channel length information, need no phase unwrapping, and unlike the majority of existing methods, need no pre-whitening of the system outputs.While several methods have been proposed to blindly identify over-determined convolutive MIMO systems, very scarce results exist for under-determined (No < Ni) case, all of which refer to systems that either have some special structure, or special No, Ni values. We propose a novel approach for blind identi¯cation of under-determined convolutive MIMO systems of general dimensions. As long as min(No;Ni) ¸ 2, we can always ¯nd the appropriate order of statistics that guarantees identi¯ability of the system response within trivial ambiguities. We provide the description of the class of identi¯able MIMO systems for a certain order of statistics K, and an algorithm to reach the solution.Finally we propose a novel approach for blind identi¯cation and symbol recovery of a distributed antenna system with multiple carrier-frequency o®sets (CFO), arising due to mismatch between the oscillators of transmitters and receivers. The received base-band signal is over-sampled, and its polyphase components are used to formulate a virtual MIMO problem. By applying blind MIMO system estimation techniques, the system response is estimated and used to subsequently decouple the users and transform the multiple CFOs estimation problem into a set of independent single CFO estimation problems.Ph.D., Electrical Engineering -- Drexel University, 200
Overview of Constrained PARAFAC Models
In this paper, we present an overview of constrained PARAFAC models where the
constraints model linear dependencies among columns of the factor matrices of
the tensor decomposition, or alternatively, the pattern of interactions between
different modes of the tensor which are captured by the equivalent core tensor.
Some tensor prerequisites with a particular emphasis on mode combination using
Kronecker products of canonical vectors that makes easier matricization
operations, are first introduced. This Kronecker product based approach is also
formulated in terms of the index notation, which provides an original and
concise formalism for both matricizing tensors and writing tensor models. Then,
after a brief reminder of PARAFAC and Tucker models, two families of
constrained tensor models, the co-called PARALIND/CONFAC and PARATUCK models,
are described in a unified framework, for order tensors. New tensor
models, called nested Tucker models and block PARALIND/CONFAC models, are also
introduced. A link between PARATUCK models and constrained PARAFAC models is
then established. Finally, new uniqueness properties of PARATUCK models are
deduced from sufficient conditions for essential uniqueness of their associated
constrained PARAFAC models
Brain signal analysis in space-time-frequency domain : an application to brain computer interfacing
In this dissertation, advanced methods for electroencephalogram (EEG) signal analysis in the space-time-frequency (STF) domain with applications to eye-blink (EB) artifact removal and brain computer interfacing (BCI) are developed. The two methods for EB artifact removal from EEGs are presented which respectively include the estimated spatial signatures of the EB artifacts into the signal extraction and the robust beamforming frameworks. In the developed signal extraction algorithm, the EB artifacts are extracted as uncorrelated signals from EEGs. The algorithm utilizes the spatial signatures of the EB artifacts as priori knowledge in the signal extraction stage. The spatial distributions are identified using the STF model of EEGs. In the robust beamforming approach, first a novel space-time-frequency/time-segment (STF-TS) model for EEGs is introduced. The estimated spatial signatures of the EBs are then taken into account in order to restore the artifact contaminated EEG measurements. Both algorithms are evaluated by using the simulated and real EEGs and shown to produce comparable results to that of conventional approaches. Finally, an effective paradigm for BCI is introduced. In this approach prior physiological knowledge of spectrally band limited steady-state movement related potentials is exploited. The results consolidate the method.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Brain signal analysis in space-time-frequency domain: an application to brain computer interfacing
In this dissertation, advanced methods for electroencephalogram (EEG) signal analysis in the space-time-frequency (STF) domain with applications to eye-blink (EB) artifact removal and brain computer interfacing (BCI) are developed. The two methods for EB artifact removal from EEGs are presented which respectively include the estimated spatial signatures of the EB artifacts into the signal extraction and the robust beamforming frameworks. In the developed signal extraction algorithm, the EB artifacts are extracted as uncorrelated signals from EEGs. The algorithm utilizes the spatial signatures of the EB artifacts as priori knowledge in the signal extraction stage. The spatial distributions are identified using the STF model of EEGs. In the robust beamforming approach, first a novel space-time-frequency/time-segment (STF-TS) model for EEGs is introduced. The estimated spatial signatures of the EBs are then taken into account in order to restore the artifact contaminated EEG measurements. Both algorithms are evaluated by using the simulated and real EEGs and shown to produce comparable results to that of conventional approaches. Finally, an effective paradigm for BCI is introduced. In this approach prior physiological knowledge of spectrally band limited steady-state movement related potentials is exploited. The results consolidate the method
Linear Transmit-Receive Strategies for Multi-user MIMO Wireless Communications
Die Notwendigkeit zur Unterdrueckung von Interferenzen auf der einen Seite
und zur Ausnutzung der durch Mehrfachzugriffsverfahren erzielbaren Gewinne
auf der anderen Seite rueckte die raeumlichen Mehrfachzugriffsverfahren
(Space Division Multiple Access, SDMA) in den Fokus der Forschung. Ein
Vertreter der raeumlichen Mehrfachzugriffsverfahren, die lineare
Vorkodierung, fand aufgrund steigender Anzahl an Nutzern und Antennen in
heutigen und zukuenftigen Mobilkommunikationssystemen besondere Beachtung,
da diese Verfahren das Design von Algorithmen zur Vorcodierung
vereinfachen. Aus diesem Grund leistet diese Dissertation einen Beitrag zur
Entwicklung linearer Sende- und Empfangstechniken fuer MIMO-Technologie mit
mehreren Nutzern. Zunaechst stellen wir ein Framework zur Approximation des
Datendurchsatzes in Broadcast-MIMO-Kanaelen mit mehreren Nutzern vor. In
diesem Framework nehmen wir das lineare Vorkodierverfahren regularisierte
Blockdiagonalisierung (RBD) an. Durch den Vergleich von Dirty Paper Coding
(DPC) und linearen Vorkodieralgorithmen (z.B. Zero Forcing (ZF) und
Blockdiagonalisierung (BD)) ist es uns moeglich, untere und obere Schranken
fuer den Unterschied bezueglich Datenraten und bezueglich Leistung zwischen
beiden anzugeben. Im Weiteren entwickeln wir einen Algorithmus fuer
koordiniertes Beamforming (Coordinated Beamforming, CBF), dessen Loesung
sich in geschlossener Form angeben laesst. Dieser CBF-Algorithmus basiert
auf der SeDJoCo-Transformation und loest bisher vorhandene Probleme im
Bereich CBF. Im Anschluss schlagen wir einen iterativen CBF-Algorithmus
namens FlexCoBF (flexible coordinated beamforming) fuer
MIMO-Broadcast-Kanaele mit mehreren Nutzern vor. Im Vergleich mit bis dato
existierenden iterativen CBF-Algorithmen kann als vielversprechendster
Vorteil die freie Wahl der linearen Sende- und Empfangsstrategie
herausgestellt werden. Das heisst, jede existierende Methode der linearen
Vorkodierung kann als Sendestrategie genutzt werden, waehrend die Strategie
zum Empfangsbeamforming frei aus MRC oder MMSE gewaehlt werden darf. Im
Hinblick auf Szenarien, in denen Mobilfunkzellen in Clustern
zusammengefasst sind, erweitern wir FlexCoBF noch weiter. Hier wurde das
Konzept der koordinierten Mehrpunktverbindung (Coordinated Multipoint
(CoMP) transmission) integriert. Zuletzt stellen wir drei Moeglichkeiten
vor, Kanalzustandsinformationen (Channel State Information, CSI) unter
verschiedenen Kanalumstaenden zu erlangen. Die Qualitaet der
Kanalzustandsinformationen hat einen starken Einfluss auf die Guete des
Uebertragungssystems. Die durch unsere neuen Algorithmen erzielten
Verbesserungen haben wir mittels numerischer Simulationen von Summenraten
und Bitfehlerraten belegt.In order to combat interference and exploit large multiplexing gains of the
multi-antenna systems, a particular interest in spatial division multiple
access (SDMA) techniques has emerged. Linear precoding techniques, as one
of the SDMA strategies, have obtained more attention due to the fact that
an increasing number of users and antennas involved into the existing and
future mobile communication systems requires a simplification of the
precoding design. Therefore, this thesis contributes to the design of
linear transmit and receive strategies for multi-user MIMO broadcast
channels in a single cell and clustered multiple cells. First, we present a
throughput approximation framework for multi-user MIMO broadcast channels
employing regularized block diagonalization (RBD) linear precoding.
Comparing dirty paper coding (DPC) and linear precoding algorithms (e.g.,
zero forcing (ZF) and block diagonalization (BD)), we further quantify
lower and upper bounds of the rate and power offset between them as a
function of the system parameters such as the number of users and antennas.
Next, we develop a novel closed-form coordinated beamforming (CBF)
algorithm (i.e., SeDJoCo based closed-form CBF) to solve the existing open
problem of CBF. Our new algorithm can support a MIMO system with an
arbitrary number of users and transmit antennas. Moreover, the application
of our new algorithm is not only for CBF, but also for blind source
separation (BSS), since the same mathematical model has been used in BSS
application.Then, we further propose a new iterative CBF algorithm (i.e.,
flexible coordinated beamforming (FlexCoBF)) for multi-user MIMO broadcast
channels. Compared to the existing iterative CBF algorithms, the most
promising advantage of our new algorithm is that it provides freedom in the
choice of the linear transmit and receive beamforming strategies, i.e., any
existing linear precoding method can be chosen as the transmit strategy and
the receive beamforming strategy can be flexibly chosen from MRC or MMSE
receivers. Considering clustered multiple cell scenarios, we extend the
FlexCoBF algorithm further and introduce the concept of the coordinated
multipoint (CoMP) transmission. Finally, we present three strategies for
channel state information (CSI) acquisition regarding various channel
conditions and channel estimation strategies. The CSI knowledge is required
at the base station in order to implement SDMA techniques. The quality of
the obtained CSI heavily affects the system performance. The performance
enhancement achieved by our new strategies has been demonstrated by
numerical simulation results in terms of the system sum rate and the bit
error rate