Improving Energy Efficiency for IoT Communications in 5G Networks

Increase in number of Internet of Things (IoT) devices is quickly changing how mobile networks are being used by shifting more usage to uplink transmissions rather than downlink transmissions. Currently, mobile network uplinks utilize Single Carrier Frequency Division Multiple Access (SC-FDMA) schemes due to the low Peak to Average Power Ratio (PAPR) when compared to Orthogonal Frequency Division Multiple Access (OFDMA). In an IoT perspective, power ratios are highly important in effective battery usage since devices are typically resource-constrained. Fifth Generation (5G) mobile networks are believed to be the future standard network that will handle the influx of IoT device uplinks while preserving the quality of service (QoS) that current Long Term Evolution Advanced (LTE-A) networks provide. In this paper, the Enhanced OEA algorithm was proposed and simulations showed a reduction in the device energy consumption and an increase in the power efficiency of uplink transmissions while preserving the QoS rate provided with SC-FDMA in 5G networks. Furthermore, the computational complexity was reduced through insertion of a sorting step prior to resource allocation

Peak-to-Average-Power-Ratio (PAPR) Reduction Techniques for Orthogonal-Frequency-Division- Multiplexing (OFDM) Transmission

Wireless communication has experienced an incredible growth in the last decade. Two decades ago,the number of mobile subscribers was less than 1% of the world\u27s population. As of 2011, the number of mobile subscribers has increased tremendously to 79.86% of the world\u27s population. Robust and high-rate data transmission in mobile environments faces severe problems due to the time-variant channel conditions, multipath fading and shadow fading. Fading is the main limitation on wireless communication channels. Frequency selective interference and fading, such as multipath fading, is a bandwidth bottleneck in the last mile which runs from the access point to the user. The last mile problem in wireless communication networks is caused by the environment of free space channels through which the signal propagates. Orthogonal Frequency Division Multiplexing (OFDM) is a promising modulation and multiplexing technique due to its robustness against multipath fading. Nevertheless, OFDM suffers from high Peak-to-Average- Power-Ratio (PAPR), which results in a complex OFDM signal. In this research, reduction of PAPR considering the out-of-band radiation and the regeneration of the time-domain signal peaks caused by filtering has been studied and is presented. Our PAPR reduction was 30% of the Discrete Fourier Transform (DFT) with Interleaved Frequency Division Multiple Access (IFDMA) utilizing Quadrature Phase Shift Keying (QPSK) and varying the roll-off factor. We show that pulse shaping does not affect the PAPR of Localized Frequency Division Multiple Access (LFDMA) as much as it affects the PAPR of IFDMA. Therefore, IFDMA has an important trade-off relationship between excess bandwidth and PAPR performance, since excess bandwidth increases as the roll-off factor increases. In addition, we studied a low complexity clipping scheme, applicable to IFDMA uplink and OFDM downlink systems for PAPR reduction. We show that the performance of the PAPR of the Interleaved-FDMA scheme is better than traditional OFDMA for the uplink transmission system. Our reduction of PAPR is 53% when IFDMA is used instead of OFDMA in the uplink direction. Furthermore, we also examined an important trade-off relationship between clipping distortion and quantization noise when the clipping scheme is used for OFDM downlink systems. Our results show a significant reduction in the PAPR and the out-of-band radiation caused by clipping for OFDM downlink transmission system

PAPR REDUCTION IN LAYERED-OFDMA OF LTE-A: A NEW PRECODING BASED ADAPTIVE UPLINK RA SYSTEM

This paper presents a new precoding based adaptive multi-carrier/single-carrier (MC/SC) uplink radio-access (RA) system with improved peak-to-average power ratio (PAPR) for layered orthogonal frequency division multiple access (Layered-OFDMA) of long term evolution advanced (LTE-A). The Discrete-Cosine transform (DCT) precoding is applied before subcarrier mapping and IFFT to reduce the high PAPR of the MC uplink system. The conventional SC system is implemented to sustain all the functionalities offered by the release 8 LTE. Extensive computer simulations have been performed to analyze the PAPR of the proposed system. The computer simulation results show that, the PAPR of DCT precoded MC signals is approximately same as that of conventional SC signals

Comparative Analysis between OFDMA and SC-FDMA: Model, Features and Applications

This paper represents Orthogonal Frequency Division Multiple Access (OFDMA) and Single Carrier Frequency Division Multiple Access (SCFDMA) techniques along with the Orthogonal Frequency Division Multiplexing (OFDM). The concept, model, features, scopes, applications and limitation for both types of multiple access have been discussed in this paper. In present 4G and 5G cellular communication system, both OFDMA and SC-FDMA have a notable applications. Dividing the available spectrum into overlapping orthogonal narrowband sub bands, OFDMA ensures high spectral efficiency. Besides by allocating multiple sub carriers to each user, OFDMA provides high data rate, reduces inter blockage interference, minimizes frequency selective fading and so on. But it suffers from high peak to average power ration (PAPR) which results in high power consumption at the transmitter end. SC-FDMA is one of the most promising techniques to solve the PAPR problems. Besides it also removes the capacity problem of wireless cellular systems and provides higher spectral efficiency, depending on multiplexing signals based on their spatial signature. On the other hand, in OFDM due to fixed subcarrier allocations for each user and its performance can suffer from narrowband fading and interference

PAPR In LTE UPLINK : Problem and Improvement

LTE-Advanced is one of the most competing and widely adopted families of standards that will meet the 4G broadband wireless mobile communications requirements recommended by the IMT-Advanced for the terrestrial radio interface specifications. Pre-commercial deployments have proved that LTE-Advanced will ensure the competitiveness of the 4G mobile networks by providing a high-data-rate , low latency and optimized system. Unlike the IEEE802.16m WiMAX which uses OFDMA in both downlink and uplink multiple access schemes, LTE and its advanced version systems continue to use different multiple access transmissions in which OFDMA and SC-FDMA are supported in the downlink and the uplink, respectively. The idea to use OFDMA in the LTE uplink communications invoked discord among the members of the 3GPP standardization body because of the growing concern over the signal peakiness which degrades the efficiency of mobile station power battery consumption. The dire consequence of the peak amplitudes generated by the superposition of several subcarriers of identical phases led 3GPP to adopt SC-FDMA as an uplink multiple access method. Thus in this paper , the effect of pulse shaping on the performance of the uplink PAPR of distributed FDMA and localized FDMA will be dealt deeply. The performance improvement will be done by varying the roll-off factor of the raised-cosine filter for pulse shaping after IFFT.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format