Review of the CALIMAS Team Contributions to European Space Agency's Soil Moisture and Ocean Salinity Mission Calibration and Validation

Camps, Adriano ... et al.-- 38 pages, 22 figuresThis work summarizes the activities carried out by the SMOS (Soil Moisture and Ocean Salinity) Barcelona Expert Center (SMOS-BEC) team in conjunction with the CIALE/Universidad de Salamanca team, within the framework of the European Space Agency (ESA) CALIMAS project in preparation for the SMOS mission and during its first year of operation. Under these activities several studies were performed, ranging from Level 1 (calibration and image reconstruction) to Level 4 (land pixel disaggregation techniques, by means of data fusion with higher resolution data from optical/infrared sensors). Validation of SMOS salinity products by means of surface drifters developed ad-hoc, and soil moisture products over the REMEDHUS site (Zamora, Spain) are also presented. Results of other preparatory activities carried out to improve the performance of eventual SMOS follow-on missions are presented, including GNSS-R to infer the sea state correction needed for improved ocean salinity retrievals and land surface parameters. Results from CALIMAS show a satisfactory performance of the MIRAS instrument, the accuracy and efficiency of the algorithms implemented in the ground data processors, and explore the limits of spatial resolution of soil moisture products using data fusion, as well as the feasibility of GNSS-R techniques for sea state determination and soil moisture monitoringThis work has been performed under research grants TEC2005-06863-C02-01/TCM, ESP2005-06823-C05, ESP2007-65667-C04, AYA2008-05906-C02-01/ESP and AYA2010-22062-C05 from the Spanish Ministry of Science and Innovation, and a EURYI 2004 award from the European Science FoundationPeer Reviewe

Improved Monitoring of the Changjiang River Plume in the East China Sea During the Monsoon Season Using Satellite Borne L-Band Radiometers

Measurement of sea surface salinity (SSS) from Satellite borne L-band (1.4 GHz, 21cm) radiometers (NASA Aquarius/SAC-D and ESA SMOS) in the East China Sea (ECS) is challenging due to the uncertainty of SSS caused by land thermal emissions in the antenna side lobes and because of strong radio frequency interference (RFI) due to illegally emitted man-made sources. RFI contamination in the ECS has gradually decreased because of the on-going international efforts to eliminate broadcasts in the protected L-band radio-astronomy frequency band. The present dissertation focuses on carefully eliminating the remaining RFI contamination in retrieved SSS, and masking out regions close to the coast that are likely contaminated by thermal emissions from the land. Afterward, observation of SSS during the summer monsoon season in the ECS was conducted to demonstrate low salinity (\u3c 28 psu) Changjiang Diluted Water (CDW) which is a mixture of Changjiang River (CR) plume mixing and the ambient ocean water causing ecosystem disruptions as far east as the Korean peninsula. In this study, during southeasterly wind, CDW was observed to be horizontally advected east-northeastward due to Ekman flow. In addition, monthly averaged Aquarius SSS presented one-month lagged robust relationship with freshwater flux. Despite limits on temporal information of SMOS, the detachment of CDW from its formation region and northeastward advection was successfully observed after the arrival of the tropical storm Matmo in the mainland China

2000 days of SMOS at the Barcelona Expert Centre: a tribute to the work of Jordi Font

Soil Moisture and Ocean Salinity (SMOS) is the first satellite mission capable of measuring sea surface salinity and soil moisture from space. Its novel instrument (the L-band radiometer MIRAS) has required the development of new algorithms to process SMOS data, a challenging task due to many processing issues and the difficulties inherent in a new technology. In the wake of SMOS, a new community of users has grown, requesting new products and applications, and extending the interest in this novel brand of satellite services. This paper reviews the role played by the Barcelona Expert Centre under the direction of Jordi Font, SMOS co-principal investigator. The main scientific activities and achievements and the future directions are discussed, highlighting the importance of the oceanographic applications of the mission.Peer ReviewedPostprint (published version

SMOS instrument performance after more than 11 years in orbit

ESA's Soil Moisture and Ocean Salinity (SMOS) mission [1] has been in orbit for over 11 years, and its Microwave Imaging Radiometer with Aperture Synthesis (MIRAS) in two dimensions keeps being fully operational. This II-year long lifetime of SMOS, so far, has enabled the calibration and Level-1 processor team to improve the calibration procedures and the image reconstruction resulting in a new version of the Level-1 data processor, v724. To present the main performance features of this new version and the improvement in the calibration procedures constitute the main objective and content of this presentation.Peer ReviewedArticle signat per 32 autors/es: Manuel Martín-Neira(1), Roger Oliva(2) , Raúl Onrubia(2) , Ignasi Corbella(3), Nuria Duffo(3), Roselena Rubino(3), Juha Kainulainen(4), Josep Closa(5), Albert Zurita(5), Javier del Castillo(5), François Cabot(6), Ali Khazaal(6), Eric Anterrieu(6), Jose Barbosa(7), Gonçalo Lopes(8), Daniel Barros(8), Joe Tenerelli(9), Raúl Díez-García(10), Verena Rodríguez(10) , Jorge Fauste(14) , José María Castro Cerón(15) , Antonio Turiel(11), Verónica González-Gambau(11), Raffaele Crapolicchio(12), Lorenzo Di Ciolo(16) , Giovanni Macelloni(13), Marco Brogioni(13), Francesco Montomoli(13), Pierre Vogel(1), Berta Hoyos Ortega(1), Elena Checa Cortés(1), Martin Suess(1) // (1) European Space Agency, ESTEC, Noordwijk, The Netherlands; (2)Zenithal Blue Technologies, Barcelona, Spain; (3) Remote Sensing Laboratory, Universitat Politècnica de Catalunya, Barcelona, Spain; (4) Harp Technologies Ltd., Espoo, Finland; (5) Airbus Defence and Space, Madrid, Spain; (6) CESBIO, Toulouse, France; (7) RDA, Zürich, Switzerland; (8) DEIMOS, Lisbon, Portugal; (9) OceanDataLab, Brest, France; (10) Telespazio UK Ltd, ESAC, Villanueva de la Cañada, Spain; (11) SMOS Barcelona Expert Centre, Barcelona, Spain; (12) European Space Agency, ESRIN, Frascati, Italy; (13) Institute of Applied Physics, Florence, Italy; (14) European Space Agency, ESAC, Villanueva de la Cañada, Spain; (15) ISDEFE, ESAC, Villanueva de la Cañada, Spain; (16) Serco Italia S.p.A., Frascati, Italy.Postprint (author's final draft

Sea surface salinity seasonal variability in the tropics from satellites, gridded in situ products and mooring observations

© The Author(s), 2021. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Bingham, F. M., Brodnitz, S., & Yu, L. Sea surface salinity seasonal variability in the tropics from satellites, gridded in situ products and mooring observations. Remote Sensing, 13(1), (2021): 110, doi:10.3390/rs13010110.Satellite observations of sea surface salinity (SSS) have been validated in a number of instances using different forms of in situ data, including Argo floats, moorings and gridded in situ products. Since one of the most energetic time scales of variability of SSS is seasonal, it is important to know if satellites and gridded in situ products are observing the seasonal variability correctly. In this study we validate the seasonal SSS from satellite and gridded in situ products using observations from moorings in the global tropical moored buoy array. We utilize six different satellite products, and two different gridded in situ products. For each product we have computed seasonal harmonics, including amplitude, phase and fraction of variance (R2). These quantities are mapped for each product and for the moorings. We also do comparisons of amplitude, phase and R2 between moorings and all the satellite and gridded in situ products. Taking the mooring observations as ground truth, we find general good agreement between them and the satellite and gridded in situ products, with near zero bias in phase and amplitude and small root mean square differences. Tables are presented with these quantities for each product quantifying the degree of agreement.This research was funded by the National Aeronautics and Space Administration under grant number 80NSSC18K1322

Coupled land surface and radiative transfer models for the analysis of passive microwave satellite observations

Soil moisture is one of the key variables controlling the water and energy exchanges between Earth’s surface and the atmosphere. Therefore, remote sensing based soil moisture information has potential applications in many disciplines. Besides numerical weather forecasting and climate research these include agriculture and hydrologic applications like flood and drought forecasting. The first satellite specifically designed to deliver operational soil moisture products, SMOS (Soil Moisture and Ocean Salinity), was launched 2009 by the European Space Agency (ESA). SMOS is a passive microwave radiometer working in the L-band of the microwave domain, corresponding to a frequency of roughly 1.4 GHz and relies on a new concept. The microwave radiation emitted by the Earth’s surface is measured as brightness temperatures in several look angles. A radiative transfer model is used in an inversion algorithm to retrieve soil moisture and vegetation optical depth, a measure for the vegetation attenuation of the soil’s microwave emission. For the application of passive microwave remote sensing products a proper validation and uncertainty assessment is essential. As these sensors have typical spatial resolutions in the order of 40 – 50 km, a validation that relies solely on ground measurements is costly and labour intensive. Here, environmental modelling can make a valuable contribution. Therefore the present thesis concentrates on the question which contribution coupled land surface and radiative transfer models can make to the validation and analysis of passive microwave remote sensing products. The objective is to study whether it is possible to explain known problems in the SMOS soil moisture products and to identify potential approaches to improve the data quality. The land surface model PROMET (PRocesses Of Mass and Energy Transfer) and the radiative transfer model L-MEB (L-band microwave emission of the Biosphere) are coupled to simulate land surface states, e.g. temperatures and soil moisture, and the resulting microwave emission. L-MEB is also used in the SMOS soil moisture processor to retrieve soil moisture and vegetation optical depth simultaneously from the measured microwave emission. The study area of this work is the Upper Danube Catchment, located mostly in Southern Germany. Since model validation is essential if model data are to be used as reference, both models are validated on different spatial scales with measurements. The uncertainties of the models are quantified. The root mean squared error between modelled and measured soil moisture at several measuring stations on the point scale is 0.065 m3/m3. On the SMOS scale it is 0.039 m3/m3. The correlation coefficient on the point scale is 0.84. As it is essential for the soil moisture retrieval from passive microwave data that the radiative transfer modelling works under local conditions, the coupled models are used to assess the radiative transfer modelling with L-MEB on the local and SMOS scales in the Upper Danube Catchment. In doing so, the emission characteristics of rape are described for the first time and the soil moisture retrieval abilities of L-MEB are assessed with a newly developed LMEB parameterization. The results show that the radiative transfer modelling works well under most conditions in the study area. The root mean squared error between modelled and airborne measured brightness temperatures on the SMOS scale is less than 6 – 9 K for the different look angles. The coupled models are used to analyse SMOS brightness temperatures and vegetation optical depth data in the Upper Danube Catchment in Southern Germany. Since the SMOS soil moisture products are degraded in Southern Germany and in different other parts of the world these analyses are used to narrow down possible reasons for this. The thorough analysis of SMOS brightness temperatures for the year 2011 reveals that the quality of the measurements is degraded like in the SMOS soil moisture product. This points towards radio frequency interference problems (RFI), that are known, but have not yet been studied thoroughly. This is consistent with the characteristics of the problems observed in the SMOS soil moisture products. In addition to that it is observed that the brightness temperatures in the lower look angles are less reliable. This finding could be used to improve the brightness temperature filtering before the soil moisture retrieval. An analysis of SMOS optical depth data in 2011 reveals that this parameter does not contain valuable information about vegetation. Instead, an unexpected correlation with SMOS soil moisture is found. This points towards problems with the SMOS soil moisture retrieval, possibly under the influence of RFI. The present thesis demonstrates that coupled land surface and radiative transfer models can make a valuable contribution to the validation and analysis of passive microwave remote sensing products. The unique approach of this work incorporates modelling with a high spatial and temporal resolution on different scales. This makes detailed process studies on the local scale as well as analyses of satellite data on the SMOS scale possible. This could be exploited for the validation of future satellite missions, e.g. SMAP (Soil Moisture Active and Passive) which is currently being prepared by NASA (National Aeronautics and Space Administration). Since RFI seems to have a considerable influence on the SMOS data due to the gained insights and the quality of the SMOS products is very good in other parts of the world, the RFI containment and mitigation efforts carried out since the launch of SMOS should be continued

Using SMOS and Sentinel 3 satellite data to obtain high resolution soil moisture maps

Surface soil moisture is a critical climate variable and strongly influences water and energy cycles at the surface-atmosphere interface. It is widely used to improve numerical climate and weather models, rainfall and drough estimation, vegetation monitoring, among others. Traditionally, there were two main ways to retrieve soil moisture data. On one hand, soil moisture sensors networks placed and maintained in situ to obtain long term distributed measurements, which is expensive and time-consuming. On the other hand, soil moisture data could be obtained by using numerical model products combined with ground observations. But, in both cases, the data resolution provided was not enough to characterize soil moisture at large scale. Nowadays, microwave remote sensing allows the global monitoring of soil moisture. SMOS (Soil Moisture and Ocean Salinity) mission, launched in 2009, was the first mission with this objective and providing an acceptable spatial resolution. It aims to monitor soil moisture over land surfaces, surface salinity over the oceans, and surfaces covered by snow and ice, by performing microwave radiometric measurements at L-band, characterized by being unaffected by cloud cover and variable surface solar illumination. The SMOS soil moisture data has a spatial resolution of 35-50 km, which is enough for global applications. But, local applications such as hydrological, fire prevention, agricultural and water management, require higher soil moisture resolution. In order to cover this necessity, several downscaling methodologies have been developed to improve the spatial resolution. The Department of Signal Theory in the UPC developed a downscaling algorithm based on the synergistic usage of low resolution soil moisture map and data provided by other satellites, that computed soil moisture maps at 1 km resolution (Maria Piles, 2010 [32]). This algorithm combines the SMOS soil moisture with NDVI and LST measurements from Aqua and Terra missions obtained by MODIS instrument. Later, this algorithm was improved by using an adaptive sliding window, which is the version we will use in this project (Gerard Portal, 2017 [24]). The aim of this project is to substitute the NDVI and LST measurements from MODIS used as ancillary data in the downscaling algorithm by the ones provided by Sentinel 3, comparing its differences and the variation of the high resolution soil moisture maps (SM HR maps) obtained. Also, it will include the evaluation of the data download and preparation process workflow

Nodal sampling: a new image reconstruction algorithm for SMOS

Soil moisture and ocean salinity (SMOS) brightness temperature (TB) images and calibrated visibilities are related by the so-called G -matrix. Due to the incomplete sampling at some spatial frequencies, sharp transitions in the TB scenes generate a Gibbs-like contamination ringing and spread sidelobes. In the current SMOS image reconstruction strategy, a Blackman window is applied to the Fourier components of the TBs to diminish the amplitude of artifacts such as ripples, as well as other Gibbs -like effects. In this paper, a novel image reconstruction algorithm focused on the reduction of Gibbs -like contamination in TB images is proposed. It is based on sampling the TB images at the nodal points, that is, at those points at which the oscillating interference causes the minimum distortion to the geophysical signal. Results show a significant reduction of ripples and sidelobes in strongly radio-frequency interference contaminated images. This technique has been thoroughly validated using snapshots over the ocean, by comparing TBs reconstructed in the standard way or using the nodal sampling (NS) with modeled TBs. Tests have revealed that the standard deviation of the difference between the measurement and the model is reduced around 1 K over clean and stable zones when using NS technique with respect to the SMOS image reconstruction baseline. The reduction is approximately 0.7 K when considering the global ocean. This represents a crucial improvement in TB quality, which will translate in an enhancement of the retrieved geophysical parameters, particularly the sea surface salinity.Peer ReviewedPostprint (author's final draft