Multiple-fault detection methodology based on vibration and current analysis applied to bearings in induction motors and gearboxes on the kinematic chain

© 2016 Juan Jose Saucedo-Dorantes et al. Gearboxes and induction motors are important components in industrial applications and their monitoring condition is critical in the industrial sector so as to reduce costs and maintenance downtimes. There are several techniques associated with the fault diagnosis in rotating machinery; however, vibration and stator currents analysis are commonly used due to their proven reliability. Indeed, vibration and current analysis provide fault condition information by means of the fault-related spectral component identification. This work presents a methodology based on vibration and current analysis for the diagnosis of wear in a gearbox and the detection of bearing defect in an induction motor both linked to the same kinematic chain; besides, the location of the fault-related components for analysis is supported by the corresponding theoretical models. The theoretical models are based on calculation of characteristic gearbox and bearings fault frequencies, in order to locate the spectral components of the faults. In this work, the influence of vibrations over the system is observed by performing motor current signal analysis to detect the presence of faults. The obtained results show the feasibility of detecting multiple faults in a kinematic chain, making the proposed methodology suitable to be used in the application of industrial machinery diagnosis.Postprint (published version

Bearing Fault Detection in Induction Machine Using Squared Envelope Analysis of Stator Current

In this chapter, motor current signature analysis based on squared envelope spectrum is applied in order to identify and to estimate the severity of outer race bearing faults in induction machine. This methodology is based on conventional vibration analysis techniques, however, it is, non-invasive, low cost, and easier to implement. Bearing fault detection and identification in induction machines is of utmost importance in order to avoid unexpected breakdowns and even a catastrophic event. Thus, bearing fault characteristic components are extracted combining summation of phase currents, prewhitening, spectral kurtosis and squared envelope spectrum analysis. Experimental results with a 0.37 W, 60 Hz, and three-phase induction machine demonstrated the methodology effectiveness

Bearing Fault Diagnosis for Direct-Drive Wind Turbines via Current-Demodulated Signals

Bearing faults account for a large portion of all faults in wind turbine generators (WTGs). Current-based bearing fault diagnosis techniques have great economic benefits and are potential to be adopted by the wind energy industry. This paper models the modulation effects of bearing faults on the stator currents of a direct-drive wind turbine equipped with a permanent-magnet synchronous generator (PMSG) operating with a variable shaft rotating frequency. Based on the analysis, a method consisting of appropriate current frequency and amplitude demodulation algorithms and a 1P-invariant power spectrum density algorithm is proposed for bearing fault diagnosis of variable-speed direct-drive wind turbines using only one-phase stator current measurements, where 1P frequency stands for the shaft rotating frequency of a wind turbine. Experimental results on a direct-drive wind turbine equipped with a PMSG operating in a wind tunnel are provided to verify the proposed fault diagnosis method. The proposed method is demonstrated to have advantages over the method of directly using stator current measurements for WTG bearing fault diagnosis

Analysis of Ball Bearing Defects in Synchronous Machines using Electrical Measurements

Rolling element bearings are used in most electrical machines, especially for small and medium size applications. Under non-ideal operating conditions, ball bearing condition degrades by fatigue, ambient vibration, misalignment, overloading, contamination, corrosion from water or chemicals, improper lubrication, shaft currents and residual stress left from the bearing manufacturing process. All of these conditions eventually lead to increased vibration and acoustic noise during machine operation which at some point in time results in unexpected bearing failure. Over the years, a great number of publications have been devoted to the detection of mechanical faults, including rolling element bearing defects and torsional defects, in electrical machines based on Electrical Signature Analysis (ESA). It has been observed that these faults can affect either the stator to rotor air-gap distribution or the running speed of the machine, which can be reflected in the signature of the electrical signals. However, the physical link between the mechanical degradation and the electrical signature is still not explained well. A multi-physics model is developed by joining the detailed mechanical model of a rotor bearing system and the electrical model of a synchronous machine in this research. This combined model is capable of describing the transmission of information originating from bearing faults and their impact on the variations of the measured electrical signals. The electrical machine model is developed based on winding function approach and its validity is demonstrated by a more accurate Finite Element Method (FEM) model. The mechanical model consists of a high fidelity rotor-bearing system with detailed nonlinear ball bearing model and a flexible finite element shaft model. It is validated using the housing vibration data collected from some experiments. Generalized roughness bearing anomalies are linked to load torque ripples and airgap variations, while being related to current signature by phase and amplitude modulation. Considering that the induced characteristic signatures are usually subtle broadband changes in the current spectra, these signatures are easily affected by input power quality variations, machine manufacturing imperfections and environmental noise. In this research, a new algorithm is proposed to isolate the influence of the external disturbances of power quality, machine manufacturing imperfections and environmental noise, and to improve the effectiveness of applying the ESA for generalized roughness bearing defects. The results show that the proposed method is effective in analyzing the generalized roughness bearing anomaly in synchronous machines. Furthermore, the electrical signatures are analyzed in a synchronous machine with bearing defects. The proposed fault detection method employs a Zoomed Fast Fourier Transform (ZFFT) and Principal Component Analysis (PCA) and it is also tested on the available experimental data. The results show that amplitude induced electrical harmonics are related to the level of vibration, and the electrical signatures are affected heavily by other variables, such as power quality and load fluctuation. The proposed method is shown to be effective on detecting generalized roughness bearing defects in synchronous machines

Development of an induction motor condition monitoring test rig And fault detection strategies

Includes bibliographical references.This thesis sets out to develop an induction motor condition monitoring test rig to experimentally simulate the common faults associated with induction motors and to develop strategies for detecting these faults that employ signal processing techniques. Literature on basic concepts of induction motors and inverter drives, the phenomena of common faults associated with induction motors, the condition monitoring systems were intensively reviewed

An Assessment on the Non-Invasive Methods for Condition Monitoring of Induction Motors

The ability to forecast motor mechanical faults at incipient stages is vital to reducing maintenance costs, operation downtime and safety hazards. This paper synthesized the progress in the research and development in condition monitoring and fault diagnosis of induction motors. The motor condition monitoring techniques are mainly classified into two categories that are invasive and non-invasive techniques. The invasive techniques are very basic, but they have some implementation difficulties and high cost. The non-invasive methods, namely MCSA, PVA and IPA, overcome the disadvantages associated to invasive methods. This book chapter reviews the various non-invasive condition monitoring methods for diagnosis of mechanical faults in induction motor and concludes that the instantaneous power analysis (IPA) and Park vector analysis (PVA) methods are best suitable for the diagnosis of small fault signatures associated to mechanical faults. Recommendations for the future research in these areas are also presented