18,468 research outputs found
Recommended from our members
The influences of environmental conditions on source localisation using a single vertical array and their exploitation through ground effect inversion
The performance of microphone arrays outdoors is influenced by the environmental conditions. Numerical simulations indicate that, while horizontal arrays are hardly affected, direction-of-arrival (DOA) estimation with vertical arrays becomes biased in presence of ground reflections and sound speed gradients. Turbulence leads to a huge variability in the estimates by reducing the ground effect. Ground effect can be exploited by combining classical source localization with an appropriate propagation model (ground effect inversion). Not only does this allow the source elevation and range to be determined with a single vertical array but also it allows separation of sources which can no longer be distinguished by far field localization methods. Furthermore, simulations provide detail of the achievable spatial resolution depending on frequency range, array size and localization algorithm and show a clear advantage of broadband processing. Outdoor measurements with one or two sources confirm the results of the numerical simulations
Cooperative and Distributed Localization for Wireless Sensor Networks in Multipath Environments
We consider the problem of sensor localization in a wireless network in a
multipath environment, where time and angle of arrival information are
available at each sensor. We propose a distributed algorithm based on belief
propagation, which allows sensors to cooperatively self-localize with respect
to one single anchor in a multihop network. The algorithm has low overhead and
is scalable. Simulations show that although the network is loopy, the proposed
algorithm converges, and achieves good localization accuracy
Channel Dynamics and SNR Tracking in Millimeter Wave Cellular Systems
The millimeter wave (mmWave) frequencies are likely to play a significant
role in fifth-generation (5G) cellular systems. A key challenge in developing
systems in these bands is the potential for rapid channel dynamics: since
mmWave signals are blocked by many materials, small changes in the position or
orientation of the handset relative to objects in the environment can cause
large swings in the channel quality. This paper addresses the issue of tracking
the signal to noise ratio (SNR), which is an essential procedure for rate
prediction, handover and radio link failure detection. A simple method for
estimating the SNR from periodic synchronization signals is considered. The
method is then evaluated using real experiments in common blockage scenarios
combined with outdoor statistical models
Acoustical Ranging Techniques in Embedded Wireless Sensor Networked Devices
Location sensing provides endless opportunities for a wide range of applications in GPS-obstructed environments;
where, typically, there is a need for higher degree of accuracy. In this article, we focus on robust range
estimation, an important prerequisite for fine-grained localization. Motivated by the promise of acoustic in
delivering high ranging accuracy, we present the design, implementation and evaluation of acoustic (both
ultrasound and audible) ranging systems.We distill the limitations of acoustic ranging; and present efficient
signal designs and detection algorithms to overcome the challenges of coverage, range, accuracy/resolution,
tolerance to Doppler’s effect, and audible intensity. We evaluate our proposed techniques experimentally on
TWEET, a low-power platform purpose-built for acoustic ranging applications. Our experiments demonstrate
an operational range of 20 m (outdoor) and an average accuracy 2 cm in the ultrasound domain. Finally,
we present the design of an audible-range acoustic tracking service that encompasses the benefits of a near-inaudible
acoustic broadband chirp and approximately two times increase in Doppler tolerance to achieve better performance
- …