22 research outputs found
Performance Enhancement Using NOMA-MIMO for 5G Networks
The integration of MIMO and NOMA technologies addresses key challenges in 5G and beyond, such as connectivity, latency, and dependability. However, resolving these issues, especially in MIMO-enabled 5G networks, required additional research. This involved optimizing parameters like bit error rate, downlink spectrum efficiency, average capacity rate, and uplink transmission outage probability. The model employed Quadrature Phase Shift Keying modulation on selected frequency channels, accommodating diverse user characteristics. Evaluation showed that MIMO-NOMA significantly improved bit error rate and transmitting power for the best user in download transmission. For uplink transmission, there was an increase in the average capacity rate and a decrease in outage probability for the best user. Closed-form formulas for various parameters in both downlink and uplink NOMA, with and without MIMO, were derived. Overall, adopting MIMO-NOMA led to a remarkable performance improvement for all users, even in challenging conditions like interference or fading channels
Multiband Spectrum Access: Great Promises for Future Cognitive Radio Networks
Cognitive radio has been widely considered as one of the prominent solutions
to tackle the spectrum scarcity. While the majority of existing research has
focused on single-band cognitive radio, multiband cognitive radio represents
great promises towards implementing efficient cognitive networks compared to
single-based networks. Multiband cognitive radio networks (MB-CRNs) are
expected to significantly enhance the network's throughput and provide better
channel maintenance by reducing handoff frequency. Nevertheless, the wideband
front-end and the multiband spectrum access impose a number of challenges yet
to overcome. This paper provides an in-depth analysis on the recent
advancements in multiband spectrum sensing techniques, their limitations, and
possible future directions to improve them. We study cooperative communications
for MB-CRNs to tackle a fundamental limit on diversity and sampling. We also
investigate several limits and tradeoffs of various design parameters for
MB-CRNs. In addition, we explore the key MB-CRNs performance metrics that
differ from the conventional metrics used for single-band based networks.Comment: 22 pages, 13 figures; published in the Proceedings of the IEEE
Journal, Special Issue on Future Radio Spectrum Access, March 201
Cooperative Wireless Systems
This Ph.D. dissertation reports on the work performed at the Wireless Communication Laboratory - University of Bologna and National Research Council - as well as, for six months, at the Fraunhofer Institute for Integrated Circuit (IIS) in Nürnberg. The work of this thesis is in the area of wireless communications, especially with regards to cooperative communications aspects in narrow-band and ultra-wideband systems, cooperative links characterization, network geometry, power allocation techniques,and synchronization between nodes. The underpinning of this work is devoted to developing a general framework for design and analysis of wireless cooperative communication systems, which depends on propagation environment, transmission technique, diversity method, power allocation for various scenarios and relay positions. The optimal power allocation for minimizing the bit error probability at the destination is derived. In addition, a syncronization algorithm for master-slave communications is proposed with the aim of jointly compensate the clock drift and offset of wireless nodes composing the network
RESOURCE ALLOCATION FOR WIRELESS RELAY NETWORKS
In this thesis, we propose several resource allocation strategies for relay networks in the context of joint power and bandwidth allocation and relay selection, and joint power allocation and subchannel assignment for orthogonal frequency division multiplexing (OFDM) and orthogonal frequency division multiple access (OFDMA) systems. Sharing the two best ordered relays with equal power between the two users over Rayleigh flat fading channels is proposed to establish full diversity order for both users. Closed form expressions for the outage probability, and bit error probability (BEP) performance measures for both amplify and forward (AF) and decode and forward (DF) cooperative communication schemes are developed for different scenarios. To utilize the full potentials of relay-assisted transmission in multi user systems, we propose a mixed strategy of AF relaying and direct transmission, where the user transmits part of the data using the relay, and the other part is transmitted using the direct link. The resource allocation problem is formulated to maximize the sum rate. A recursive algorithm alternating between power allocation and bandwidth allocation steps is proposed to solve the formulated resource allocation problem. Due to the conflict between limited wireless resources and the fast growing wireless demands, Stackelberg game is proposed to allocate the relay resources (power and bandwidth) between competing users, aiming to maximize the relay benefits from selling its resources. We prove the uniqueness of Stackelberg Nash Equilibrium (SNE) for the proposed game. We develop a distributed algorithm to reach SNE, and investigate the conditions for the stability of the proposed algorithm. We propose low complexity algorithms for AF-OFDMA and DF-OFDMA systems to assign the subcarriers to the users based on high SNR approximation aiming to maximize the weighted sum rate. Auction framework is proposed to devise competition based solutions for the resource allocation of AF-OFDMA aiming tomaximize either vi the sum rate or the fairness index. Two auction algorithms are proposed; sequential and one-shot auctions. In sequential auction, the users evaluate the subcarrier based on the rate marginal contribution. In the one-shot auction, the users evaluate the subcarriers based on an estimate of the Shapley value and bids on all subcarriers at once
MAC/PHY Co-Design of CSMA Wireless Networks Using Software Radios.
In the past decade, CSMA-based protocols have spawned numerous network standards (e.g., the WiFi family), and played a key role in improving the ubiquity of wireless networks. However, the rapid evolution of CSMA brings unprecedented challenges, especially the coexistence of different network architectures and communications devices. Meanwhile, many intrinsic limitations of CSMA have been the main obstacle to the performance of its derivatives, such as ZigBee, WiFi, and mesh networks. Most of these problems are observed to root in the abstract interface of the CSMA MAC and PHY layers --- the MAC simply abstracts the advancement of PHY technologies as a change of data rate. Hence, the benefits of new PHY technologies are either not fully exploited, or they even may harm the performance of existing network protocols due to poor interoperability.
In this dissertation, we show that a joint design of the MAC/PHY layers can achieve a substantially higher level of capacity, interoperability and energy efficiency than the weakly coupled MAC/PHY design in the current CSMA wireless networks. In the proposed MAC/PHY co-design, the PHY layer exposes more states and capabilities to the MAC, and the MAC performs intelligent adaptation to and control over the PHY layer. We leverage the reconfigurability of software radios to design smart signal processing algorithms that meet the challenge of making PHY capabilities usable by the MAC layer. With the approach of MAC/PHY co-design, we have revisited the primitive operations of CSMA (collision avoidance, carrier signaling, carrier sensing, spectrum access and transmitter cooperation), and overcome its limitations in relay and broadcast applications, coexistence of heterogeneous networks, energy efficiency, coexistence of different spectrum widths, and scalability for MIMO networks. We have validated the feasibility and performance of our design using extensive analysis, simulation and testbed implementation.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/95944/1/xyzhang_1.pd
Recommended from our members
Improving System Reliability for Cyber-Physical Systems
Cyber-physical systems (CPS) are systems featuring a tight combination of, and coordination between, the system's computational and physical elements. Cyber-physical systems include systems ranging from critical infrastructure such as a power grid and transportation system to health and biomedical devices. System reliability, i.e., the ability of a system to perform its intended function under a given set of environmental and operational conditions for a given period of time, is a fundamental requirement of cyber-physical systems. An unreliable system often leads to disruption of service, financial cost and even loss of human life. An important and prevalent type of cyber-physical system meets the following criteria: processing large amounts of data; employing software as a system component; running online continuously; having operator-in-the-loop because of human judgment and an accountability requirement for safety critical systems. This thesis aims to improve system reliability for this type of cyber-physical system. To improve system reliability for this type of cyber-physical system, I present a system evaluation approach entitled automated online evaluation (AOE), which is a data-centric runtime monitoring and reliability evaluation approach that works in parallel with the cyber-physical system to conduct automated evaluation along the workflow of the system continuously using computational intelligence and self-tuning techniques and provide operator-in-the-loop feedback on reliability improvement. For example, abnormal input and output data at or between the multiple stages of the system can be detected and flagged through data quality analysis. As a result, alerts can be sent to the operator-in-the-loop. The operator can then take actions and make changes to the system based on the alerts in order to achieve minimal system downtime and increased system reliability. One technique used by the approach is data quality analysis using computational intelligence, which applies computational intelligence in evaluating data quality in an automated and efficient way in order to make sure the running system perform reliably as expected. Another technique used by the approach is self-tuning which automatically self-manages and self-configures the evaluation system to ensure that it adapts itself based on the changes in the system and feedback from the operator. To implement the proposed approach, I further present a system architecture called autonomic reliability improvement system (ARIS). This thesis investigates three hypotheses. First, I claim that the automated online evaluation empowered by data quality analysis using computational intelligence can effectively improve system reliability for cyber-physical systems in the domain of interest as indicated above. In order to prove this hypothesis, a prototype system needs to be developed and deployed in various cyber-physical systems while certain reliability metrics are required to measure the system reliability improvement quantitatively. Second, I claim that the self-tuning can effectively self-manage and self-configure the evaluation system based on the changes in the system and feedback from the operator-in-the-loop to improve system reliability. Third, I claim that the approach is efficient. It should not have a large impact on the overall system performance and introduce only minimal extra overhead to the cyberphysical system. Some performance metrics should be used to measure the efficiency and added overhead quantitatively. Additionally, in order to conduct efficient and cost-effective automated online evaluation for data-intensive CPS, which requires large volumes of data and devotes much of its processing time to I/O and data manipulation, this thesis presents COBRA, a cloud-based reliability assurance framework. COBRA provides automated multi-stage runtime reliability evaluation along the CPS workflow using data relocation services, a cloud data store, data quality analysis and process scheduling with self-tuning to achieve scalability, elasticity and efficiency. Finally, in order to provide a generic way to compare and benchmark system reliability for CPS and to extend the approach described above, this thesis presents FARE, a reliability benchmark framework that employs a CPS reliability model, a set of methods and metrics on evaluation environment selection, failure analysis, and reliability estimation. The main contributions of this thesis include validation of the above hypotheses and empirical studies of ARIS automated online evaluation system, COBRA cloud-based reliability assurance framework for data-intensive CPS, and FARE framework for benchmarking reliability of cyber-physical systems. This work has advanced the state of the art in the CPS reliability research, expanded the body of knowledge in this field, and provided some useful studies for further research