High precision hybrid RF and ultrasonic chirp-based ranging for low-power IoT nodes

Hybrid acoustic-RF systems offer excellent ranging accuracy, yet they typically come at a power consumption that is too high to meet the energy constraints of mobile IoT nodes. We combine pulse compression and synchronized wake-ups to achieve a ranging solution that limits the active time of the nodes to 1 ms. Hence, an ultra low-power consumption of 9.015 µW for a single measurement is achieved. The operation time is estimated on 8.5 years on a CR2032 coin cell battery at a 1 Hz update rate, which is over 250 times larger than state-of-the-art RF-based positioning systems. Measurements based on a proof-of-concept hardware platform show median distance error values below 10 cm. Both simulations and measurements demonstrate that the accuracy is reduced at low signal-to-noise ratios and when reflections occur. We introduce three methods that enhance the distance measurements at a low extra processing power cost. Hence, we validate in realistic environments that the centimeter accuracy can be obtained within the energy budget of mobile devices and IoT nodes. The proposed hybrid signal ranging system can be extended to perform accurate, low-power indoor positioning

Fast Chirped Signals for a TDMA Ultrasonic Indoor Positioning System

In this paper, a new concept for ultrasonic indoor positioning based on instantaneous frequency of ultrasonic signals is presented. Nonlinear phase characteristics of ultrasonic transducers introduce a frequency deviation in ultrasonic signals. By sweeping at very fast rates, a large spike in the deviation is introduced. The artefacts observable in instantaneous frequency estimations are highly localized and present an opportunity for accurate frequency detection. In order to be useful, the artefacts need to take place within the pulse and have sufficient magnitude for accurate processing. The system consists of a transducer transmitter and receiver pair, which have a center frequency of 40kHz and a bandwidth of 460Hz. In order to incorporate more transmitters, a time-division multiple access (TDMA) scheme is applied to ensure orthogonality of signals. The concept includes four ultrasonic transmitters and a single receiver, which can uniquely identify each transmitter by a distinct signal sweep. Linear chirp signals are used to form narrow pulses and ensure no interference in the TDMA scheme. The received signal is amplified and passed through a phase-locked loop (PLL) to detect the chirp signals. Accurate instantaneous frequency detection can be done on the voltage-controlled oscillator (VCO) of the PLL, which has a narrower bandwidth than the overall signal sweep. The instantaneous frequency estimation methods are largely explored in this work and consider two methods: the Hilbert transform and a zero-crossings method. This work highlights some of the advantages and disadvantages of both methods. Time of flight (ToF) in this system can ultimately be obtained by considering the instantaneous frequency estimations and the time for one particular frequency to be transmitted and received

Simultaneous excitation systems for ultrasonic indoor positioning

The ultrasonic technology is a tool for indoor positioning systems (IPSs) and has been extensively used in many applications. In ultrasonic IPSs (UIPSs), the use of a chirp signal (in which the frequency varies with time) is widespread due to its capability to obtain high-range resolution through its time-frequency characteristic. It also provides an opportunity to design effective waveform diversity which has always been the key to mitigating multiple-access interference (MAI) in multi-user UIPSs. To explore this, we analyze the chirp signal from the signal design perspective, with the goal of developing a precise and efficient UIPS for multi-user environments. To achieve this, three waveform diversity design schemes are proposed in which all the benefits of the classical chirp, such as high-range resolution, are retained while all the transmitters can transmit chirp signals simultaneously. In each scheme, a linear chirp is divided into two linear sub-chirps with diverse durations and/or bandwidths. This process is optimized by selecting the concatenated sub-chirps that generate a waveform which has a high-range resolution and relatively low interference in the same scheme. Initially, the effectiveness of the proposed schemes is evaluated for five simultaneous excitation signals using several metrics and experimental results are then presented for the ultrasonic indoor positioning

A survey on acoustic positioning systems for location-based services

Positioning systems have become increasingly popular in the last decade for location-based services, such as navigation, and asset tracking and management. As opposed to outdoor positioning, where the global navigation satellite system became the standard technology, there is no consensus yet for indoor environments despite the availability of different technologies, such as radio frequency, magnetic field, visual light communications, or acoustics. Within these options, acoustics emerged as a promising alternative to obtain high-accuracy low-cost systems. Nevertheless, acoustic signals have to face very demanding propagation conditions, particularly in terms of multipath and Doppler effect. Therefore, even if many acoustic positioning systems have been proposed in the last decades, it remains an active and challenging topic. This article surveys the developed prototypes and commercial systems that have been presented since they first appeared around the 1980s to 2022. We classify these systems into different groups depending on the observable that they use to calculate the user position, such as the time-of-flight, the received signal strength, or the acoustic spectrum. Furthermore, we summarize the main properties of these systems in terms of accuracy, coverage area, and update rate, among others. Finally, we evaluate the limitations of these groups based on the link budget approach, which gives an overview of the system's coverage from parameters such as source and noise level, detection threshold, attenuation, and processing gain.Agencia Estatal de InvestigaciónResearch Council of Norwa

Multi-Sensor Methods for Mobile Radar Motion Capture and Compensation.

Ph.D. Thesis. University of Hawaiʻi at Mānoa 2017

Correlator implementation for orthogonal CSS used in an ultrasonic LPS

This paper presents a new architecture for the correlation of orthogonal complementary sets of sequences (OCSS) and their performance in an ultrasonic local positioning system (U-LPS). OCSS are sets of sequences whose addition of correlation functions has ideal properties, that makes interference-free code-division multiple access (CDMA) possible. They can be used to encode the signals emitted by a CDMA based U-LPS, enhancing the performance of such systems in terms of immunity against noise, multipath propagation, and near-far effect. Also, the orthogonality of the codes offers an operation resistance to multiaccess interference, which endows the U-LPS with the capability of simultaneous emission from different beacons. On the other hand, the detection of OCSS codes can be performed by means of efficient algorithms. This paper presents an optimization of previous proposals allowing the simultaneous correlation of OCSS by using fewer operations and memory elements. Furthermore, the hardware implementation of the proposed optimization is also addressed, and an U-LPS based on this proposal is presented.Fil: Peréz Rubio, M. Carmen. Universidad de Alcalá; EspañaFil: Sanz Serrano, Rebeca. Universidad de Alcalá; EspañaFil: Ureña Ureña, Jesús. Universidad de Alcalá; EspañaFil: Hernández Alonso, Álvaro. Universidad de Alcalá; EspañaFil: de Marziani, Carlos Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Álvarez Franco, Fernando J.. Universidad Nacional de la Patagonia "San Juan Bosco". Facultad de Ingeniería - Sede Comodoro; Argentin

A Robust High-Accuracy Ultrasound Indoor Positioning System Based on a Wireless Sensor Network

This paper describes the development and implementation of a robust high-accuracy ultrasonic indoor positioning system (UIPS). The UIPS consists of several wireless ultrasonic beacons in the indoor environment. Each of them has a fixed and known position coordinate and can collect all the transmissions from the target node or emit ultrasonic signals. Every wireless sensor network (WSN) node has two communication modules: one is WiFi, that transmits the data to the server, and the other is the radio frequency (RF) module, which is only used for time synchronization between different nodes, with accuracy up to 1 μs. The distance between the beacon and the target node is calculated by measuring the time-of-flight (TOF) for the ultrasonic signal, and then the position of the target is computed by some distances and the coordinate of the beacons. TOF estimation is the most important technique in the UIPS. A new time domain method to extract the envelope of the ultrasonic signals is presented in order to estimate the TOF. This method, with the envelope detection filter, estimates the value with the sampled values on both sides based on the least squares method (LSM). The simulation results show that the method can achieve envelope detection with a good filtering effect by means of the LSM. The highest precision and variance can reach 0.61 mm and 0.23 mm, respectively, in pseudo-range measurements with UIPS. A maximum location error of 10.2 mm is achieved in the positioning experiments for a moving robot, when UIPS works on the line-of-sight (LOS) signal

Sensors and Systems for Indoor Positioning

This reprint is a reprint of the articles that appeared in Sensors' (MDPI) Special Issue on “Sensors and Systems for Indoor Positioning". The published original contributions focused on systems and technologies to enable indoor applications