658 research outputs found
Selective Combining for Hybrid Cooperative Networks
In this study, we consider the selective combining in hybrid cooperative
networks (SCHCNs scheme) with one source node, one destination node and
relay nodes. In the SCHCN scheme, each relay first adaptively chooses between
amplify-and-forward protocol and decode-and-forward protocol on a per frame
basis by examining the error-detecting code result, and () relays will be selected to forward their received signals to the
destination. We first develop a signal-to-noise ratio (SNR) threshold-based
frame error rate (FER) approximation model. Then, the theoretical FER
expressions for the SCHCN scheme are derived by utilizing the proposed SNR
threshold-based FER approximation model. The analytical FER expressions are
validated through simulation results.Comment: 27 pages, 8 figures, IET Communications, 201
Dispensing with channel estimation: differentially modulated cooperative wireless communications
As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective
Threshold-based Selective Cooperative-NOMA
In this letter, we propose threshold-based selective cooperative-NOMA
(TBS-C-NOMA) to increase the data reliability of conventional cooperative-NOMA
(C-NOMA) networks. In TBS-C-NOMA, the intra-cell user forwards the symbols of
cell-edge user after successive interference canceler (SIC) only if the
signal-to-interference plus noise ratio (SINR) is greater than the
pre-determined threshold value. Hence, the data reliability of the cell-edge
user is increased by eliminating the effect of the error propagation. We derive
closed-form end-to-end exact bit error probability (BEP) of proposed system for
various modulation constellations. Then, the optimum threshold value is
analyzed in order to minimize BEP. The obtained expressions are validated via
simulations and it is revealed that TBS-C-NOMA outperforms C-NOMA and full
diversity order is achieved
Multi-Antenna Assisted Virtual Full-Duplex Relaying with Reliability-Aware Iterative Decoding
In this paper, a multi-antenna assisted virtual full-duplex (FD) relaying
with reliability-aware iterative decoding at destination node is proposed to
improve system spectral efficiency and reliability. This scheme enables two
half-duplex relay nodes, mimicked as FD relaying, to alternatively serve as
transmitter and receiver to relay their decoded data signals regardless the
decoding errors, meanwhile, cancel the inter-relay interference with
QR-decomposition. Then, by deploying the reliability-aware iterative
detection/decoding process, destination node can efficiently mitigate
inter-frame interference and error propagation effect at the same time.
Simulation results show that, without extra cost of time delay and signalling
overhead, our proposed scheme outperforms the conventional selective
decode-and-forward (S-DF) relaying schemes, such as cyclic redundancy check
based S-DF relaying and threshold based S-DF relaying, by up to 8 dB in terms
of bit-error-rate.Comment: 6 pages, 4 figures, conference paper has been submitte
Relay-Induced Error Propagation Reduction for Decode-and-Forward Cooperative Communications
An attractive hybrid method of mitigating the effects of error propagation that may be imposed by the relay node (RN) on the destination node (DN) is proposed. We selected the most appropriate relay location for achieving a specific target Bit Error Ratio (BER) at the relay and signalled the RN-BER to the DN. The knowledge of this BER was then exploited by the decoder at the destination. Our simulation results show that when the BER at the RN is low, we do not have to activate the RN-BER aided decoder at the DN. However, when the RN-BER is high, significant system performance improvements may be achieved by activating the proposed RN-BER based decoding technique at the DN. For example, a power-reduction of up to about 19dB was recorded at a DN BER of 10-4
Symbol-Level Selective Full-Duplex Relaying with Power and Location Optimization
In this paper, a symbol-level selective transmission for full-duplex (FD)
relaying networks is proposed to mitigate error propagation effects and improve
system spectral efficiency. The idea is to allow the FD relay node to predict
the correctly decoded symbols of each frame, based on the generalized square
deviation method, and discard the erroneously decoded symbols, resulting in
fewer errors being forwarded to the destination node. Using the capability for
simultaneous transmission and reception at the FD relay node, our proposed
strategy can improve the transmission efficiency without extra cost of
signalling overhead. In addition, targeting on the derived expression for
outage probability, we compare it with half-duplex (HD) relaying case, and
provide the transmission power and relay location optimization strategy to
further enhance system performance. The results show that our proposed scheme
outperforms the classic relaying protocols, such as cyclic redundancy check
based selective decode-and-forward (S-DF) relaying and threshold based S-DF
relaying in terms of outage probability and bit-error-rate. Moreover, the
performances with optimal power allocation is better than that with equal power
allocation, especially when the FD relay node encounters strong
self-interference and/or it is close to the destination node.Comment: 34 pages (single-column), 14 figures, 2 tables, accepted pape
Relay Selection with Network Coding in Two-Way Relay Channels
In this paper, we consider the design of joint network coding (NC)and relay
selection (RS) in two-way relay channels. In the proposed schemes, two users
first sequentially broadcast their respective information to all the relays. We
propose two RS schemes, a single relay selection with NC and a dual relay
selection with NC. For both schemes, the selected relay(s) perform NC on the
received signals sent from the two users and forward them to both users. The
proposed schemes are analyzed and the exact bit error rate (BER) expressions
are derived and verified through Monte Carlo simulations. It is shown that the
dual relay selection with NC outperforms other considered relay selection
schemes in two-way relay channels. The results also reveal that the proposed NC
relay selection schemes provide a selection gain compared to a NC scheme with
no relay selection, and a network coding gain relative to a conventional relay
selection scheme with no NC.Comment: 11 pages, 5 figure
Adaptive relaying protocol multiple-input multiple-output orthogonal frequency division multiplexing systems
In wireless broadband communications, orthogonal frequency division multiplexing (OFDM) has been adopted as a promising technique to mitigate multi-path fading and provide high spectral efficiency. In addition, cooperative communication can explore spatial diversity where several users or nodes share their resources and cooperate through distributed transmission. The concatenation of the OFDM technique with relaying systems can enhance the overall performance in terms of spectral efficiency and improve robustness against the detrimental effects of fading.
Hybrid relay selection is proposed to overcome the drawbacks of conventional forwarding schemes. However, exciting hybrid relay protocols may suffer some limitations when used for transmission over frequency-selective channels. The combination of cooperative protocols with OFDM systems has been extensively utilized in current wireless networks, and have become a promising solution for future high data rate broadband communication systems including 3D video transmission. This thesis covers two areas of high data rate networks. In the first part, several techniques using cooperative OFDM systems are presented including relay selection, space time block codes, resource allocation and adaptive bit and power allocation to introduce diversity.
Four (4) selective OFDM relaying schemes are studied over wireless networks; selective OFDM; selective OFDMA; selective block OFDM and selective unequal block OFDM. The closed-form expression of these schemes is derived. By exploiting the broadcast nature, it is demonstrated that spatial diversity can be improved. The upper bound of outage probability for the protocols is derived.
A new strategy for hybrid relay selection is proposed to improve the system performance by removing the sub-carriers that experience deep fading. The per subcarrier basis selection is considered with respect to the predefined threshold signal-to-noise ratio. The closed-form expressions of the proposed protocol in terms of bit error probability and outage probability are derived and compared with conventional hybrid relay selection. Adaptive bit and power allocation is also discussed to improve the system performance.
Distributed space frequency coding applied to hybrid relay selection to obtain full spatial and full data rate transmission is explored. Two strategies, single cluster and multiple clusters, are considered for the Alamouti code at the destination by using a hybrid relay protocol. The power allocation with and without sub-carrier pairing is also investigated to mitigate the effect of multipath error propagation in frequency-selective channels.
The second part of this thesis investigates the application of cooperative OFDM systems to high data rate transmission. Recently, there has been growing attention paid to 3D video transmission over broadband wireless channels. Two strategies for relay selection hybrid relay selection and first best second best are proposed to implement unequal error protection in the physical layer over error prone channels. The closed-form expressions of bit error probability and outage probability for both strategies are examined. The peak signal-to-noise ratio is presented to show the quality of reconstruction of the left and right views
- …