Energy-aware medium access control protocols for wireless sensors network applications

The main purpose of this thesis was to investigate energy efficient Medium Access Control (MAC) protocols designed to extend the lifetime of a wireless sensor network application, such as tracking, environment monitoring, home security, patient monitoring, e.g., foetal monitoring in the last weeks of pregnancy. From the perspective of communication protocols, energy efficiency is one of the most important issues, and can be addressed at each layer of the protocol stack; however, our research only focuses on the medium access control (MAC) layer. An energy efficient MAC protocol was designed based on modifications and optimisations for a synchronized power saving Sensor MAC (SMAC) protocol, which has three important components: periodic listen and sleep, collision and overhearing avoidance and message passing. The Sensor Block Acknowledgement (SBACK) MAC protocol is proposed, which combines contention-based, scheduling-based and block acknowledgement-based schemes to achieve energy efficiency. In SBACK, the use of ACK control packets is reduced since it will not have an ACK packet for every DATA packet sent; instead, one special packet called Block ACK Response will be used at the end of the transmission of all data packets. This packet informs the sender of how many packets were received by the receiver, reducing the number of ACK control packets we intended to reduce the power consumption for the nodes. Hence more useful data packets can be transmitted. A comparison study between SBACK and SMAC protocol is also performed. Considering 0% of packet losses, SBACK decreases the energy consumption when directly compared with S-MAC, we will have always a decrease of energy consumption. Three different transceivers will be used and considering a packet loss of 10% we will have a decrease of energy consumption between 10% and 0.1% depending on the transceiver. When there are no retransmissions of packets, SBACK only achieve worst performance when the number of fragments is less than 12, after that the decrease of average delay increases with the increase of the fragments sent. When 10% of the packets need retransmission only for the TR1000 transceiver worst results occurs in terms of energy waste, all other transceivers (CC2420 and AT86RF230) achieve better results. In terms of delay if we need to retransmit more than 10 packets the SBACK protocol always achieves better performance when comparing with the other MAC protocols that uses ACK

Remote aerial data acquisition and capture project (RADAC)

The RADAC Project encompasses the design and prototype implementation of a system for low-cost aerial data sensor acquisition. It includes a Ground Transponder Unit (GTU), and Aerial Interrogation System (AIS) mounted under an aircraft. The GTU captures and transmits water-meter readings; the AIS initiates’ measurements and processes and displays the results. The proposed system is based on RF devices in association with a small low-cost single chip camera and microcontrollers. During a consultancy to a large Queensland government authority which has approximately 8000 water meters in regional and remote parts of the state. It was realised that considerable savings could be made in the management of water resources and human resources needed to read these at three month intervals. This project will calculate the RF subsystem performance in terms of gain, beamwidth, return loss, bandwidth, and matching of the antenna into the RF transceiver device Design Executive Data Acquisition System and Design and implement Interrogation Microcontrollerand Design PCB for RF Transceiver and Design and calculate power usage and Power Supply design and calculate High-Gain Helical Antenna. The solution based on using RF devices based on IEEE802.15.4 (IEEE 2006) in association with a small low cost single chip camera andmicrocontroller. Figure 1 shows the Block Diagram of the Ground Transponder Unit and symbolic AIS. The potential saving in maintenance costs to industry by remotely taking measurements is significant enough to warrant furtherinvestigation with industry. There is the potential for its adaption in other resource sector

Performance Evaluation of Security Solutions for Wireless Sensor Networks

In the recent years, wireless communication is involving not only computers, but a multitude of heterogeneous devices. Wireless Sensor Networks (WSNs) contribute to the new paradigm of pervasive computing, and this translates into new requirements for new applications. WSNs are employed not only on their own, but also in Cooperating Objects Systems (COSs), where mobile physical agents share the same environment to fulfill their tasks, either in group or in isolation. Sensor nodes are typically resource constrained devices deployed in unattended, possibly hostile environments. WSNs and COSs are a tempting target for an adversary, since a security infringement may easily translate into a safety one, with possible consequences in terms of damages to things and injures to people. Main security requirements for WSNs are secure communication, key management and secure bootstrapping. Security usually involves resource greedy operations, while sensors are resource constrained devices. This means that security requirements must be satisfied assuring a lightweight impact in terms of memory occupancy, network performance and energy consumption. In this thesis work, we start from a performance evaluation of the security sublayer of the IEEE 802.15.4 standard in terms of memory occupancy, network performance and energy consumption. Then, present and evaluate a solution to a vulnerability of the IEEE 802.15.4 standard that causes a selective Denial of Service attack. Finally, we present PLASA: a modular and reconfigurable security architecture for WSNs. PLASA extends the STaR architecture. STaR is a secure communication module we designed to provide confidentiality and/or authenticity of communications in a trans- parent and flexible manner. PLASA enhances STaR, introducing modules for key management and secure bootstrapping, so providing a complete system that is suitable not only for the WSN, but for the entire COS

7. GI/ITG KuVS Fachgespräch Drahtlose Sensornetze

In dem vorliegenden Tagungsband sind die Beiträge des Fachgesprächs Drahtlose Sensornetze 2008 zusammengefasst. Ziel dieses Fachgesprächs ist es, Wissenschaftlerinnen und Wissenschaftler aus diesem Gebiet die Möglichkeit zu einem informellen Austausch zu geben – wobei immer auch Teilnehmer aus der Industrieforschung willkommen sind, die auch in diesem Jahr wieder teilnehmen.Das Fachgespräch ist eine betont informelle Veranstaltung der GI/ITG-Fachgruppe „Kommunikation und Verteilte Systeme“ (www.kuvs.de). Es ist ausdrücklich keine weitere Konferenz mit ihrem großen Overhead und der Anforderung, fertige und möglichst „wasserdichte“ Ergebnisse zu präsentieren, sondern es dient auch ganz explizit dazu, mit Neueinsteigern auf der Suche nach ihrem Thema zu diskutieren und herauszufinden, wo die Herausforderungen an die zukünftige Forschung überhaupt liegen.Das Fachgespräch Drahtlose Sensornetze 2008 findet in Berlin statt, in den Räumen der Freien Universität Berlin, aber in Kooperation mit der ScatterWeb GmbH. Auch dies ein Novum, es zeigt, dass das Fachgespräch doch deutlich mehr als nur ein nettes Beisammensein unter einem Motto ist.Für die Organisation des Rahmens und der Abendveranstaltung gebührt Dank den beiden Mitgliedern im Organisationskomitee, Kirsten Terfloth und Georg Wittenburg, aber auch Stefanie Bahe, welche die redaktionelle Betreuung des Tagungsbands übernommen hat, vielen anderen Mitgliedern der AG Technische Informatik der FU Berlin und natürlich auch ihrem Leiter, Prof. Jochen Schiller

IEEE 802.15.4 MAC Protocol Study and Improvement

IEEE 802.15.4 is a standard used for low rate personal area networks (PANs). It offers device level connectivity in applications with limited ower and relaxed throughput requirements. Devices with IEEE 802.15.4 technology can be used in many potential applications, such as home networking, industry/environments monitoring, healthcare equipments, etc, due to its extremely low power features. Although the superframe beacons play the key role in synchronizing channel access in IEEE 802.15.4, they are sources for energy inefficiency. This research focuses on exploring how to optimize the beacons, and designing novel schemes to distribute the information that are supposed to be delivered to a subset of PAN devices. In this work, an acknowledgement based scheme is proposed to reduce the energy consumption in the distribution of guaranteed time slot (GTS) descriptors. Based on the observation that the superframe beacon frame has global impact on all PAN devices, an energy-efficient channel reservation scheme is presented to deliver the information (GTS descriptors and pending addresses). In addition, the problem of channel underutilization is studied in the contention free period. To address the problem, a new GTS allocation scheme is proposed to improve the bandwidth utilization

A gateway-based scalable architecture for the Internet of Things

The Internet of Things is a wide research field, and a lot of problems still have to be solved. This work aims to solve some of them, with particular regard to identifications and end point communication using only standard protocols. It consists of a network of gateways connected to each other by an overlay network. Clients and servers, on the other hand, are connected only to their local gateway. In this way distributed resources are seen, by clients, as logically connected to their local gateway. The entire work has its focus on a SOA view, where clients ask for services and obtain responses without necessarily knowing anything about the overall system. Aiming to use standard protocols only, clients use CoAP for interacting with the overall system while a p2p network, called XMHT, forms the overlay network and is responsible for localizing resources. CoAP is also used for communications between gateways. Moreover the proposed architecture implements a new way for the observing feature that aims to solve performance issues when CoAp servers are hosted in constrained devices. For demonstration purposes a little prototype has been made. The prototype consists of two Alix, which operate as a gateway, and two different boards that are used to test a realistic scenario. The first board, in fact, can be used to remotely control a light bulb and also to detect the current consumption of the bulb itself. The second board, instead, has a light sensor and a water consumption sensor. In the testbed, clients send COAP requests only to their local gateway controlling, in this way, the whole environment

Routing algorithms for wireless sensor : networks based on the duty cycle of its components

[eng] Wireless sensor network is one of the most important topics in the current data transferring. In fact regarding to data gathering and transformation, cost effective is the top topic and optimum point, which every vendors and sector are focusing on it. In the field of petrochemical regarding sensitive processes could not stay out of this scope and start to monitor the gas pipes and processes over the wireless fashion. Therefore some items should have been taking into considerations such as: instant monitoring, nonstop characteristic, long term investing and energy consuming. According to those aforesaid items, we have planned to do an investigation and find the feasibly of how we can to create and distribute a network to have accuracy to measurement , sending data reliability, having long term network life cycle and having minimum energy consuming. Therefore the only technology could help us was IEEE 802.15.4 with mixed of microcontrollers and transceivers, able to manipulate to reach out our objects in maximizing lifetime and minimizing latency in wsn, as an unique routing algorithm in Mobile ad Hoc Network. WSN in fact is a relatively new section of networking technology and nowadays is more popular. The reason of these advantages instead of others is low-power microcontroller and inexpensive sensor usage for any communications and also simple sensor designing. Regarding to network layers, Physical layer for WSN based on IEEE802.15.4 is fundamental of frames and packets transactions. So two main devices which are involving in this project: transceivers such as CC2520 and CC3200 ZigBee/IEEE 802.15.4 RF, managed by microcontrollers. Common controller for those transceivers such as MSP430F1611 16-bit MSP430 family for Texas instrument in the nodes and coordinators ideas were selected. One step more close to the idea, was other layer so called Link layer or in other hand MAC layer. Another advantage of WSN is ability to manipulate MAC layer, because modifications in lower layer always has low Energy consuming than other layers. Therefore according to these circumstances, MAC protocols are able to energy efficiency, also reduce and achieve to zero based of unused time in WSN. So any WSN, energy wasting could be control in MAC sub layer and even though MAC protocols. Other layer in WSN is declared as a Network layer, the logical way which those packets could be find the best way and shortest path in minimum time as possible and reachability to the main point based on node and coordinator. Nodes are programmed in upper layer and have been matched with MAC layer, now it's time to join and stick the frames in a packet and involving to each other. Meanwhile we decided to create a middle layer through MAC and Network layer to play as a bridge, mainly called VRT (Variable Response Time) and FRT (Fixed Response Time) to control the energy consumption in the process of routing in network layer. This algorithm is cooperating with MAC layer in sleep and wake up modes, in fact with VRT, nodes just received their needs and captured the vital packet in wake up mode, sends back the answer, now the task is finished and both sided transaction is done. After that, it's not need to have more listening and capturing packets from the remote nodes as a coordinator therefore, left the transmission process to save more energy for further wireless communication stream in sleep mode. Also FRT is another algorithm in MAC layer, to decrease the energy consumption. This algorithm is switch based energy control, as a same concept in VRT in sleeping and wakeup mode. Finally we have design this algorithm in Simulator and real world. The results correlate quite well results showing as a good agreement between two worlds, also we have obtained better results in battery consumption over network life cycle to other business algorithms.[spa] En este trabajo nos focalizaremos en la minimización del consumo a partir de la minimización del número de transmisiones. Buscamos por tanto aquel algoritmo que nos permita aumentar la probabilidad de aciertos. Esta idea, diseñará el algoritmo de enrutamiento que mejor se ajusta a la red MANET. Una vez simulada la red se diseñará un "testbed" en donde una parte de la red se implementará de forma real, mediante la introducción de sensores inalámbricos y la otra parte se hará de forma simulada, a través de una interfaz que interconecta el mundo real con la simulación de Spyder. Se pretende ver que ambos mundos progresan de forma similar. Con respecto a la capa de OSI en WSN, sería prioritaria la capa física o capa de hardware, por este motivo nuestra proyecto también se centra en el tipo determinado de hardware que debe aplicarse para obtener resultados satisfactorios. Entonces tratamos las características de los dos hardwares, el transceiver y el microcontroller. También se trata en este apartado su concepto lógico de acuerdo con la ficha técnica oficial IEEE802.15.4. La segunda prioridad de la capa OSI se centra en el Medium Access Control (MAC) de la capa. En esta capa nuestro objetivo se logrará mediante la manipulación de las addresses MAC. Los protocolos MAC deben estar orientados a la reducción del consumo de energía y también a la reducción del tiempo no utilizado en WSN, para ello aplicamos algunas políticas para controlar los comportamientos del tráfico en esta capa para cambiar el consumo de energía, la vida útil de la red y evitar el gasto innecesario de recursos, en realidad concentramos a nuestro algoritmo VRT y FRT. Respecto de la idea principal, de controlar los sensores para aumentar la vida útil de la red y disminuir el consumo de energía. En realidad se explica cómo controlar la capa MAC y forzar el hardware para lograr el objetivo principal de este proyecto. De hecho podemos decir que mejoramos el reenvío de paquetes entre los sensores intermedios, buscando el promedio de distancia HOP más corta desde el origen al destino, así como la disminución del consumo de energía en cada sensor