Memory Subsystem Optimization Techniques for Modern High-Performance General-Purpose Processors

abstract: General-purpose processors propel the advances and innovations that are the subject of humanity’s many endeavors. Catering to this demand, chip-multiprocessors (CMPs) and general-purpose graphics processing units (GPGPUs) have seen many high-performance innovations in their architectures. With these advances, the memory subsystem has become the performance- and energy-limiting aspect of CMPs and GPGPUs alike. This dissertation identifies and mitigates the key performance and energy-efficiency bottlenecks in the memory subsystem of general-purpose processors via novel, practical, microarchitecture and system-architecture solutions. Addressing the important Last Level Cache (LLC) management problem in CMPs, I observe that LLC management decisions made in isolation, as in prior proposals, often lead to sub-optimal system performance. I demonstrate that in order to maximize system performance, it is essential to manage the LLCs while being cognizant of its interaction with the system main memory. I propose ReMAP, which reduces the net memory access cost by evicting cache lines that either have no reuse, or have low memory access cost. ReMAP improves the performance of the CMP system by as much as 13%, and by an average of 6.5%. Rather than the LLC, the L1 data cache has a pronounced impact on GPGPU performance by acting as the bandwidth filter for the rest of the memory subsystem. Prior work has shown that the severely constrained data cache capacity in GPGPUs leads to sub-optimal performance. In this thesis, I propose two novel techniques that address the GPGPU data cache capacity problem. I propose ID-Cache that performs effective cache bypassing and cache line size selection to improve cache capacity utilization. Next, I propose LATTE-CC that considers the GPU’s latency tolerance feature and adaptively compresses the data stored in the data cache, thereby increasing its effective capacity. ID-Cache and LATTE-CC are shown to achieve 71% and 19.2% speedup, respectively, over a wide variety of GPGPU applications. Complementing the aforementioned microarchitecture techniques, I identify the need for system architecture innovations to sustain performance scalability of GPG- PUs in the face of slowing Moore’s Law. I propose a novel GPU architecture called the Multi-Chip-Module GPU (MCM-GPU) that integrates multiple GPU modules to form a single logical GPU. With intelligent memory subsystem optimizations tailored for MCM-GPUs, it can achieve within 7% of the performance of a similar but hypothetical monolithic die GPU. Taking a step further, I present an in-depth study of the energy-efficiency characteristics of future MCM-GPUs. I demonstrate that the inherent non-uniform memory access side-effects form the key energy-efficiency bottleneck in the future. In summary, this thesis offers key insights into the performance and energy-efficiency bottlenecks in CMPs and GPGPUs, which can guide future architects towards developing high-performance and energy-efficient general-purpose processors.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Get Out of the Valley: Power-Efficient Address Mapping for GPUs

GPU memory systems adopt a multi-dimensional hardware structure to provide the bandwidth necessary to support 100s to 1000s of concurrent threads. On the software side, GPU-compute workloads also use multi-dimensional structures to organize the threads. We observe that these structures can combine unfavorably and create significant resource imbalance in the memory subsystem causing low performance and poor power-efficiency. The key issue is that it is highly application-dependent which memory address bits exhibit high variability. To solve this problem, we first provide an entropy analysis approach tailored for the highly concurrent memory request behavior in GPU-compute workloads. Our window-based entropy metric captures the information content of each address bit of the memory requests that are likely to co-exist in the memory system at runtime. Using this metric, we find that GPU-compute workloads exhibit entropy valleys distributed throughout the lower order address bits. This indicates that efficient GPU-address mapping schemes need to harvest entropy from broad address-bit ranges and concentrate the entropy into the bits used for channel and bank selection in the memory subsystem. This insight leads us to propose the Page Address Entropy (PAE) mapping scheme which concentrates the entropy of the row, channel and bank bits of the input address into the bank and channel bits of the output address. PAE maps straightforwardly to hardware and can be implemented with a tree of XOR-gates. PAE improves performance by 1.31 x and power-efficiency by 1.25 x compared to state-of-the-art permutation-based address mapping

Improving the Performance and Energy Efficiency of GPGPU Computing through Adaptive Cache and Memory Management Techniques

Department of Computer Science and EngineeringAs the performance and energy efficiency requirement of GPGPUs have risen, memory management techniques of GPGPUs have improved to meet the requirements by employing hardware caches and utilizing heterogeneous memory. These techniques can improve GPGPUs by providing lower latency and higher bandwidth of the memory. However, these methods do not always guarantee improved performance and energy efficiency due to the small cache size and heterogeneity of the memory nodes. While prior works have proposed various techniques to address this issue, relatively little work has been done to investigate holistic support for memory management techniques. In this dissertation, we analyze performance pathologies and propose various techniques to improve memory management techniques. First, we investigate the effectiveness of advanced cache indexing (ACI) for high-performance and energy-efficient GPGPU computing. Specifically, we discuss the designs of various static and adaptive cache indexing schemes and present implementation for GPGPUs. We then quantify and analyze the effectiveness of the ACI schemes based on a cycle-accurate GPGPU simulator. Our quantitative evaluation shows that ACI schemes achieve significant performance and energy-efficiency gains over baseline conventional indexing scheme. We also analyze the performance sensitivity of ACI to key architectural parameters (i.e., capacity, associativity, and ICN bandwidth) and the cache indexing latency. We also demonstrate that ACI continues to achieve high performance in various settings. Second, we propose IACM, integrated adaptive cache management for high-performance and energy-efficient GPGPU computing. Based on the performance pathology analysis of GPGPUs, we integrate state-of-the-art adaptive cache management techniques (i.e., cache indexing, bypassing, and warp limiting) in a unified architectural framework to eliminate performance pathologies. Our quantitative evaluation demonstrates that IACM significantly improves the performance and energy efficiency of various GPGPU workloads over the baseline architecture (i.e., 98.1% and 61.9% on average, respectively) and achieves considerably higher performance than the state-of-the-art technique (i.e., 361.4% at maximum and 7.7% on average). Furthermore, IACM delivers significant performance and energy efficiency gains over the baseline GPGPU architecture even when enhanced with advanced architectural technologies (e.g., higher capacity, associativity). Third, we propose bandwidth- and latency-aware page placement (BLPP) for GPGPUs with heterogeneous memory. BLPP analyzes the characteristics of a application and determines the optimal page allocation ratio between the GPU and CPU memory. Based on the optimal page allocation ratio, BLPP dynamically allocate pages across the heterogeneous memory nodes. Our experimental results show that BLPP considerably outperforms the baseline and state-of-the-art technique (i.e., 13.4% and 16.7%) and performs similar to the static-best version (i.e., 1.2% difference), which requires extensive offline profiling.clos

Orchestrating thread scheduling and cache management to improve memory system throughput in throughput processors

textThroughput processors such as GPUs continue to provide higher peak arithmetic capability. Designing a high throughput memory system to keep the computational units busy is very challenging. Future throughput processors must continue to exploit data locality and utilize the on-chip and off-chip resources in the memory system more effectively to further improve the memory system throughput. This dissertation advocates orchestrating the thread scheduler with the cache management algorithms to alleviate GPU cache thrashing and pollution, avoid bandwidth saturation and maximize GPU memory system throughput. Based on this principle, this thesis work proposes three mechanisms to improve the cache efficiency and the memory throughput. This thesis work enhances the thread throttling mechanism with the Priority-based Cache Allocation mechanism (PCAL). By estimating the cache miss ratio with a variable number of cache-feeding threads and monitoring the usage of key memory system resources, PCAL determines the number of threads to share the cache and the minimum number of threads bypassing the cache that saturate memory system resources. This approach reduces the cache thrashing problem and effectively employs chip resources that would otherwise go unused by a pure thread throttling approach. We observe 67% improvement over the original as-is benchmarks and a 18% improvement over a better-tuned warp-throttling baseline. This work proposes the AgeLRU and Dynamic-AgeLRU mechanisms to address the inter-thread cache thrashing problem. AgeLRU prioritizes cache blocks based on the scheduling priority of their fetching warp at replacement. Dynamic-AgeLRU selects the AgeLRU algorithm and the LRU algorithm adaptively to avoid degrading the performance of non-thrashing applications. There are three variants of the AgeLRU algorithm: (1) replacement-only, (2) bypassing, and (3) bypassing with traffic optimization. Compared to the LRU algorithm, the above mentioned three variants of the AgeLRU algorithm enable increases in performance of 4%, 8% and 28% respectively across a set of cache-sensitive benchmarks. This thesis work develops the Reuse-Prediction-based cache Replacement scheme (RPR) for the GPU L1 data cache to address the intra-thread cache pollution problem. By combining the GPU thread scheduling priority together with the fetching Program Counter (PC) to generate a signature as the index of the prediction table, RPR identifies and prioritizes the near-reuse blocks and high-reuse blocks to maximize the cache efficiency. Compared to the AgeLRU algorithm, the experimental results show that the RPR algorithm results in a throughput improvement of 5% on average for regular applications, and a speedup of 3.2% on average across a set of cache-sensitive benchmarks. The techniques proposed in this dissertation are able to alleviate the cache thrashing, cache pollution and resource saturation problems effectively. We believe when these techniques are combined, they will synergistically further improve GPU cache efficiency and the overall memory system throughput.Computer Science

Dynamic Hardware Resource Management for Efficient Throughput Processing.

High performance computing is evolving at a rapid pace, with throughput oriented processors such as graphics processing units (GPUs), substituting for traditional processors as the computational workhorse. Their adoption has seen a tremendous increase as they provide high peak performance and energy efficiency while maintaining a friendly programming interface. Furthermore, many existing desktop, laptop, tablet, and smartphone systems support accelerating non-graphics, data parallel workloads on their GPUs. However, the multitude of systems that use GPUs as an accelerator run different genres of data parallel applications, which have significantly contrasting runtime characteristics. GPUs use thousands of identical threads to efficiently exploit the on-chip hardware resources. Therefore, if one thread uses a resource (compute, bandwidth, data cache) more heavily, there will be significant contention for that resource. This contention will eventually saturate the performance of the GPU due to contention for the bottleneck resource,leaving other resources underutilized at the same time. Traditional policies of managing the massive hardware resources work adequately, on well designed traditional scientific style applications. However, these static policies, which are oblivious to the application’s resource requirement, are not efficient for the large spectrum of data parallel workloads with varying resource requirements. Therefore, several standard hardware policies such as using maximum concurrency, fixed operational frequency and round-robin style scheduling are not efficient for modern GPU applications. This thesis defines dynamic hardware resource management mechanisms which improve the efficiency of the GPU by regulating the hardware resources at runtime. The first step in successfully achieving this goal is to make the hardware aware of the application’s characteristics at runtime through novel counters and indicators. After this detection, dynamic hardware modulation provides opportunities for increased performance, improved energy consumption, or both, leading to efficient execution. The key mechanisms for modulating the hardware at runtime are dynamic frequency regulation, managing the amount of concurrency, managing the order of execution among different threads and increasing cache utilization. The resultant increased efficiency will lead to improved energy consumption of the systems that utilize GPUs while maintaining or improving their performance.PhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/113356/1/asethia_1.pd

Classification-driven search for effective sm partitioning in multitasking GPUs

Graphics processing units (GPUs) feature an increasing number of streaming multiprocessors (SMs) with each successive generation. At the same time, GPUs are increasingly widely adopted in cloud services and data centers to accelerate general-purpose workloads. Running multiple applications on a GPU in such environments requires effective multitasking support. Spatial multitasking in which independent applications co-execute on different sets of SMs is a promising solution to share GPU resources. Unfortunately, how to effectively partition SMs is an open problem. In this paper, we observe that compared to widely-used even partitioning, dynamic SM partitioning based on the characteristics of the co-executing applications can significantly improve performance and power efficiency. Unfortunately, finding an effective SM partition is challenging because the number of possible combinations increases exponentially with the number of SMs and co-executing applications. Through offline analysis, we find that first classifying workloads, and then searching an effective SM partition based on the workload characteristics can significantly reduce the search space, making dynamic SM partitioning tractable. Based on these insights, we propose Classification-Driven search (CD-search) for low-overhead dynamic SM partitioning in multitasking GPUs. CD-search first classifies workloads using a novel off-SM bandwidth model, after which it enters the performance mode or power mode depending on the workload's characteristics. Both modes follow a specific search strategy to quickly determine the optimum SM partition. Our evaluation shows that CD-search improves system throughput by 10.4% on average (and up to 62.9%) over even partitioning for workloads that are classified for the performance mode. For workloads classified for the power mode, CD-search reduces power consumption by 25% on average (and up to 41.2%). CD-search incurs limited runtime overhead

Performance, Power Modeling and Optimization for High-Performance Computing Systems

University of Minnesota Ph.D. dissertation.October 2016. Major: Electrical/Computer Engineering. Advisor: John Sartori. 1 computer file (PDF); xi, 154 pages.Heterogeneity abounds in modern high-performance computing systems. Applications are heterogeneous, containing time-varying unbalanced utilization for different resources, and system architectures have become heterogeneous in order to achieve higher levels of performance and energy efficiency. The most powerful, and also the most energy-efficient high-performance computing systems today consist of many-core CPUs and GPGPUs with a variety of specialize on-chip and off-chip memories. These heterogeneous systems provide a huge amount of computing resources, but it is becoming increasingly challenging to use them effectively and efficiently to maximize their potential. This becomes an even more pressing challenge as energy efficiency becomes the primary barrier to achieving higher levels of performance. This thesis addresses the challenges of performance modeling and optimization in heterogeneous high-performance computing systems. Effective system optimization requires understanding of how performance and power change in response to optimizations. Therefore, we begin by summarizing the impact of modern architectural advances on performance and power modeling for chip multiprocessors (CMPs). We present two models that estimate the performance and power in such systems. The first model, CAMP, is a fast and accurate cache-aware performance model that estimates the performance degradation due to cache contention of processes running on cache-sharing cores. We then propose a system-level power model for a multi-programmed CMP environment that accounts for cache contention. We explain how to integrate the two models to enable power-aware process assignment. Then, we propose an off-chip memory access-aware runtime DVFS control technique that minimizes energy consumption subject to a constraint on application execution time. The second part of the dissertation focuses on improving performance for GPGPUs. After a thorough analysis on CPI breakdown, we lay out all the key factors that govern GPU throughput. In order to improve overall performance for GPGPUs, we propose two approaches that address the key factors, without introducing extra congestion and degradation to the system. We first propose a new two-level priority scheduling policy to improve overall performance by optimizing effective degree of parallelism. Then, we propose ICMT, a full, detailed solution for intra-core multitasking for GPGPUs, including architectural support and a contention-aware workload scheduling algorithm that improves all the key factors in a balanced fashion. Furthermore, we propose a new contention-aware analytical performance model that provides fine-grained workload scheduling decisions for intra-core multitasking, including detailed resource allocation from co-scheduled workloads

High-level automation of custom hardware design for high-performance computing

This dissertation focuses on efficient generation of custom processors from high-level language descriptions. Our work exploits compiler-based optimizations and transformations in tandem with high-level synthesis (HLS) to build high-performance custom processors. The goal is to offer a common multiplatform high-abstraction programming interface for heterogeneous compute systems where the benefits of custom reconfigurable (or fixed) processors can be exploited by the application developers. The research presented in this dissertation supports the following thesis: In an increasingly heterogeneous compute environment it is important to leverage the compute capabilities of each heterogeneous processor efficiently. In the case of FPGA and ASIC accelerators this can be achieved through HLS-based flows that (i) extract parallelism at coarser than basic block granularities, (ii) leverage common high-level parallel programming languages, and (iii) employ high-level source-to-source transformations to generate high-throughput custom processors. First, we propose a novel HLS flow that extracts instruction level parallelism beyond the boundary of basic blocks from C code. Subsequently, we describe FCUDA, an HLS-based framework for mapping fine-grained and coarse-grained parallelism from parallel CUDA kernels onto spatial parallelism. FCUDA provides a common programming model for acceleration on heterogeneous devices (i.e. GPUs and FPGAs). Moreover, the FCUDA framework balances multilevel granularity parallelism synthesis using efficient techniques that leverage fast and accurate estimation models (i.e. do not rely on lengthy physical implementation tools). Finally, we describe an advanced source-to-source transformation framework for throughput-driven parallelism synthesis (TDPS), which appropriately restructures CUDA kernel code to maximize throughput on FPGA devices. We have integrated the TDPS framework into the FCUDA flow to enable automatic performance porting of CUDA kernels designed for the GPU architecture onto the FPGA architecture

GPU PERFORMANCE MODELLING AND OPTIMIZATION

Ph.DNUS-TU/E JOINT PH.D