34 research outputs found

    Optimizing Semi-Analytical Algorithms for Estimating Chlorophyll-a and Phycocyanin Concentrations in Inland Waters in Korea

    Get PDF
    Several semi-analytical algorithms have been developed to estimate the chlorophyll-a (Chl-a) and phycocyanin (PC) concentrations in inland waters. This study aimed at identifying the influence of algorithm parameters on the output variables and searching optimal parameter values. The optimal parameters of seven semi-analytical algorithms were applied to estimate the Chl-a and PC concentrations. The absorption coefficient measurements were coupled with pigment measurements to calibrate the algorithm parameters. For sensitivity analysis, the elementary effect test was conducted to analyze the influence of the algorithm parameters. The sensitivity analysis results showed that the parameters in the Y function and specific absorption coefficient were the most sensitive parameters. Then, the parameters were optimized via a single-objective optimization that involved one objective function being minimized and a multi-objective optimization that contained more than one objective function. The single-objective optimization led to substantial errors in absorption coefficients. In contrast, the multi-objective optimization improved the algorithm performance with respect to both the absorption coefficient estimates and pigment concentration estimates. The optimized parameters of the absorption coefficient reflected the high-particulate content in waters of the Baekje reservoir using an infrared backscattering wavelength and relatively high value of Y. Moreover, the results indicate the value of measuring the site-specific absorption if site-specific optimization of semi-analyical algorithm parameters was envisioned

    Cyanobacteria in Inland Waters: Remote Sensing

    Get PDF
    Remote sensing plays important roles in managing harmful cyanobacterial blooms. Remote sensing algorithms for monitoring cyanobacterial blooms are grouped into empirical, semi-empirical, and semi-analytical methods. In this chapter, 12 of these methods were selected to be reviewed for their performances when applied to in situ measured field reflectance spectra and airborne or satellite sensor collected image spectra. Five empirical PC algorithms based on either band ratio or baseline calculation showed data-dependent performances, empirical band ratios and the baseline can be used to build semi-empirical models such as double three band baseline (DTBB) and four band baseline model (FBBM) showing stronger performance than the three band model (TBM), and the DTBB even performing stronger than the nested band ratio (NBR). As far as three semi-analytical models concern, the NBR and EIIMIW consistently performed well compared to the QAA pc , but care or recalibration should be practiced for applying both EIIMIW and NBR given caring inherent optical property of non-phycocyanin (PC) constituent in the water column. Although neither DTBB nor FBM cannot be evaluated with satellite MEdium Resolution Imaging Spectrometer (MERIS) and Ocean and Land Color Instrument (OLCI) images, they should be tested in future with hyperspectral satellite images acquired by PRISMA, EnMAP, and HyspIRI

    Hyperspectral Imaging for Fine to Medium Scale Applications in Environmental Sciences

    Get PDF
    The aim of the Special Issue “Hyperspectral Imaging for Fine to Medium Scale Applications in Environmental Sciences” was to present a selection of innovative studies using hyperspectral imaging (HSI) in different thematic fields. This intention reflects the technical developments in the last three decades, which have brought the capacity of HSI to provide spectrally, spatially and temporally detailed data, favoured by e.g., hyperspectral snapshot technologies, miniaturized hyperspectral sensors and hyperspectral microscopy imaging. The present book comprises a suite of papers in various fields of environmental sciences—geology/mineral exploration, digital soil mapping, mapping and characterization of vegetation, and sensing of water bodies (including under-ice and underwater applications). In addition, there are two rather methodically/technically-oriented contributions dealing with the optimized processing of UAV data and on the design and test of a multi-channel optical receiver for ground-based applications. All in all, this compilation documents that HSI is a multi-faceted research topic and will remain so in the future

    Feasibility Study for an Aquatic Ecosystem Earth Observing System Version 1.2.

    Get PDF
    International audienceMany Earth observing sensors have been designed, built and launched with primary objectives of either terrestrial or ocean remote sensing applications. Often the data from these sensors are also used for freshwater, estuarine and coastal water quality observations, bathymetry and benthic mapping. However, such land and ocean specific sensors are not designed for these complex aquatic environments and consequently are not likely to perform as well as a dedicated sensor would. As a CEOS action, CSIRO and DLR have taken the lead on a feasibility assessment to determine the benefits and technological difficulties of designing an Earth observing satellite mission focused on the biogeochemistry of inland, estuarine, deltaic and near coastal waters as well as mapping macrophytes, macro-algae, sea grasses and coral reefs. These environments need higher spatial resolution than current and planned ocean colour sensors offer and need higher spectral resolution than current and planned land Earth observing sensors offer (with the exception of several R&D type imaging spectrometry satellite missions). The results indicate that a dedicated sensor of (non-oceanic) aquatic ecosystems could be a multispectral sensor with ~26 bands in the 380-780 nm wavelength range for retrieving the aquatic ecosystem variables as well as another 15 spectral bands between 360-380 nm and 780-1400 nm for removing atmospheric and air-water interface effects. These requirements are very close to defining an imaging spectrometer with spectral bands between 360 and 1000 nm (suitable for Si based detectors), possibly augmented by a SWIR imaging spectrometer. In that case the spectral bands would ideally have 5 nm spacing and Full Width Half Maximum (FWHM), although it may be necessary to go to 8 nm wide spectral bands (between 380 to 780nm where the fine spectral features occur -mainly due to photosynthetic or accessory pigments) to obtain enough signal to noise. The spatial resolution of such a global mapping mission would be between ~17 and ~33 m enabling imaging of the vast majority of water bodies (lakes, reservoirs, lagoons, estuaries etc.) larger than 0.2 ha and ~25% of river reaches globally (at ~17 m resolution) whilst maintaining sufficient radiometric resolution

    Simultaneous retrieval of selected optical water quality indicators from Landsat-8, Sentinel-2, and Sentinel-3

    Get PDF
    Constructing multi-source satellite-derived water quality (WQ) products in inland and nearshore coastal waters from the past, present, and future missions is a long-standing challenge. Despite inherent differences in sensors’ spectral capability, spatial sampling, and radiometric performance, research efforts focused on formulating, implementing, and validating universal WQ algorithms continue to evolve. This research extends a recently developed machine-learning (ML) model, i.e., Mixture Density Networks (MDNs) (Pahlevan et al., 2020; Smith et al., 2021), to the inverse problem of simultaneously retrieving WQ indicators, including chlorophyll-a (Chla), Total Suspended Solids (TSS), and the absorption by Colored Dissolved Organic Matter at 440 nm (acdom(440)), across a wide array of aquatic ecosystems. We use a database of in situ measurements to train and optimize MDN models developed for the relevant spectral measurements (400–800 nm) of the Operational Land Imager (OLI), MultiSpectral Instrument (MSI), and Ocean and Land Color Instrument (OLCI) aboard the Landsat-8, Sentinel-2, and Sentinel-3 missions, respectively. Our two performance assessment approaches, namely hold-out and leave-one-out, suggest significant, albeit varying degrees of improvements with respect to second-best algorithms, depending on the sensor and WQ indicator (e.g., 68%, 75%, 117% improvements based on the hold-out method for Chla, TSS, and acdom(440), respectively from MSI-like spectra). Using these two assessment methods, we provide theoretical upper and lower bounds on model performance when evaluating similar and/or out-of-sample datasets. To evaluate multi-mission product consistency across broad spatial scales, map products are demonstrated for three near-concurrent OLI, MSI, and OLCI acquisitions. Overall, estimated TSS and acdom(440) from these three missions are consistent within the uncertainty of the model, but Chla maps from MSI and OLCI achieve greater accuracy than those from OLI. By applying two different atmospheric correction processors to OLI and MSI images, we also conduct matchup analyses to quantify the sensitivity of the MDN model and best-practice algorithms to uncertainties in reflectance products. Our model is less or equally sensitive to these uncertainties compared to other algorithms. Recognizing their uncertainties, MDN models can be applied as a global algorithm to enable harmonized retrievals of Chla, TSS, and acdom(440) in various aquatic ecosystems from multi-source satellite imagery. Local and/or regional ML models tuned with an apt data distribution (e.g., a subset of our dataset) should nevertheless be expected to outperform our global model

    Deep learning for the early detection of harmful algal blooms and improving water quality monitoring

    Get PDF
    Climate change will affect how water sources are managed and monitored. The frequency of algal blooms will increase with climate change as it presents favourable conditions for the reproduction of phytoplankton. During monitoring, possible sensory failures in monitoring systems result in partially filled data which may affect critical systems. Therefore, imputation becomes necessary to decrease error and increase data quality. This work investigates two issues in water quality data analysis: improving data quality and anomaly detection. It consists of three main topics: data imputation, early algal bloom detection using in-situ data and early algal bloom detection using multiple modalities.The data imputation problem is addressed by experimenting with various methods with a water quality dataset that includes four locations around the North Sea and the Irish Sea with different characteristics and high miss rates, testing model generalisability. A novel neural network architecture with self-attention is proposed in which imputation is done in a single pass, reducing execution time. The self-attention components increase the interpretability of the imputation process at each stage of the network, providing knowledge to domain experts.After data curation, algal activity is predicted using transformer networks, between 1 to 7 days ahead, and the importance of the input with regard to the output of the prediction model is explained using SHAP, aiming to explain model behaviour to domain experts which is overlooked in previous approaches. The prediction model improves bloom detection performance by 5% on average and the explanation summarizes the complex structure of the model to input-output relationships. Performance improvements on the initial unimodal bloom detection model are made by incorporating multiple modalities into the detection process which were only used for validation purposes previously. The problem of missing data is also tackled by using coordinated representations, replacing low quality in-situ data with satellite data and vice versa, instead of imputation which may result in biased results

    Predicting the resilience and recovery of aquatic systems: A framework for model evolution within environmental observatories

    Get PDF
    Maintaining the health of aquatic systems is an essential component of sustainable catchment management, however, degradation of water quality and aquatic habitat continues to challenge scientists and policy-makers. To support management and restoration efforts aquatic system models are required that are able to capture the often complex trajectories that these systems display in response to multiple stressors. This paper explores the abilities and limitations of current model approaches in meeting this challenge, and outlines a strategy based on integration of flexible model libraries and data from observation networks, within a learning framework, as a means to improve the accuracy and scope of model predictions. The framework is comprised of a data assimilation component that utilizes diverse data streams from sensor networks, and a second component whereby model structural evolution can occur once the model is assessed against theoretically relevant metrics of system function. Given the scale and transdisciplinary nature of the prediction challenge, network science initiatives are identified as a means to develop and integrate diverse model libraries and workflows, and to obtain consensus on diagnostic approaches to model assessment that can guide model adaptation. We outline how such a framework can help us explore the theory of how aquatic systems respond to change by bridging bottom-up and top-down lines of enquiry, and, in doing so, also advance the role of prediction in aquatic ecosystem management

    Modelling the Seasonal Growth of the Brown Seaweed Fucus Vesiculosus in the Kiel Outdoor Benthocosms

    Get PDF
    Warming and acidification of the oceans as a consequence of increasing CO2-concentrations occur globally. In mesocosm experiments, the single and combined impact of elevated seawater temperature and pCO2 (1,100 ppm) on the brown alga Fucus vesiculosus together with its ssociated community (epiphytes and mesograzers) was studied in four consecutive experiments (from April 2013 to April 2014). Based on these experiments, a numerical boxmodel simulating the seasonal growth of F. vesiculosus in the Kiel Outdoor Benthocosms (KOBs) was developed. Nitrogen and carbon cycling in the KOBs were considered and relevant physiological and ecological processes were implemented. To run simulations under present and global change scenarios (e.g. warming, ocean acidification) the model was forced with atmospheric and hydrographic data of the Kiel fjord. DIN and DIC concentration in the water and Fucus growth as carbon and nitrogen increase were explicitly modelled. For instance, the following processes were implemented: (1) Storage of carbon and nitrogen assimilates by Fucus, leading to a temporal decoupling of assimilation and growth. (2) Shading effects of epiphytes. (3) Grazing by Idotea, Gammarus and Littorina on both Fucus and epiphytes, but with species-specific rates and preferences. At present, the model is a suitable scientific tool capable of integrating our knowledge about macroalgal processes, their growth and productivity in coastal areas. It further facilitates the communication of complex knowledge to lay persons. Ultimately, the development of a predictive model, which can be coupled to a 3D-high resolution western Baltic Sea model, is anticipated. This will allow observations on the consequences of global change for the wellbeing and distribution of F. vesiculosus in the western Baltic Sea. Understanding responses of macroalgae and of the associated community is important because changing global temperatures and elevated CO2 may affect the ecological role of Fucus as primary producer, carbon sink, water purifier, and ecosystem engineer in the coastal ecosystem of the Baltic Sea

    Proceedings of the 10th International Conference on Ecological Informatics: translating ecological data into knowledge and decisions in a rapidly changing world: ICEI 2018

    Get PDF
    The Conference Proceedings are an impressive display of the current scope of Ecological Informatics. Whilst Data Management, Analysis, Synthesis and Forecasting have been lasting popular themes over the past nine biannual ICEI conferences, ICEI 2018 addresses distinctively novel developments in Data Acquisition enabled by cutting edge in situ and remote sensing technology. The here presented ICEI 2018 abstracts captures well current trends and challenges of Ecological Informatics towards: • regional, continental and global sharing of ecological data, • thorough integration of complementing monitoring technologies including DNA-barcoding, • sophisticated pattern recognition by deep learning, • advanced exploration of valuable information in ‘big data’ by means of machine learning and process modelling, • decision-informing solutions for biodiversity conservation and sustainable ecosystem management in light of global changes

    Proceedings of the 10th International Conference on Ecological Informatics: translating ecological data into knowledge and decisions in a rapidly changing world: ICEI 2018

    Get PDF
    The Conference Proceedings are an impressive display of the current scope of Ecological Informatics. Whilst Data Management, Analysis, Synthesis and Forecasting have been lasting popular themes over the past nine biannual ICEI conferences, ICEI 2018 addresses distinctively novel developments in Data Acquisition enabled by cutting edge in situ and remote sensing technology. The here presented ICEI 2018 abstracts captures well current trends and challenges of Ecological Informatics towards: • regional, continental and global sharing of ecological data, • thorough integration of complementing monitoring technologies including DNA-barcoding, • sophisticated pattern recognition by deep learning, • advanced exploration of valuable information in ‘big data’ by means of machine learning and process modelling, • decision-informing solutions for biodiversity conservation and sustainable ecosystem management in light of global changes
    corecore