10,171 research outputs found
The system architecture of the Pocket Companion
In the Moby Dick project we design the architecture of a so-called Pocket Companion. It is a small personal portable computer with wireless communication facilities for every day use. The typical use of the Pocket Companion induces a number of requirements concerning security, performance, energy consumption, communication and size. We have shown that these requirements are interrelated and can only be met optimal with one single architecture. The Pocket Companion architecture consists of a central switch with a security module surrounded by several modules. The Pocket Companion is a personal machine. Communication, and particularly wireless communication, is essential for the system to support electronic transactions. Such a system requires a good security infrastructure not only for safeguarding personal data, but also to allow safe (financial) transactions. The integration of a security module in the Pocket Companion architecture provides the basis for a secure environment.\ud
Because battery life is limited and battery weight is an important factor for the size and the weight of the Pocket Companion, energy consumption plays a crucial role in the architecture. An important theme of the architecture is: enough performance for minimal energy consumption
Fog-supported delay-constrained energy-saving live migration of VMs over multiPath TCP/IP 5G connections
The incoming era of the fifth-generation fog computing-supported radio access networks (shortly, 5G FOGRANs) aims at exploiting computing/networking resource virtualization, in order to augment the limited resources of wireless devices through the seamless live migration of virtual machines (VMs) toward nearby fog data centers. For this purpose, the bandwidths of the multiple wireless network interface cards of the wireless devices may be aggregated under the control of the emerging MultiPathTCP (MPTCP) protocol. However, due to the fading and mobility-induced phenomena, the energy consumptions of the current state-of-the-art VM migration techniques may still offset their expected benefits. Motivated by these considerations, in this paper, we analytically characterize and implement in software and numerically test the optimal minimum-energy settable-complexity bandwidth manager (SCBM) for the live migration of VMs over 5G FOGRAN MPTCP connections. The key features of the proposed SCBM are that: 1) its implementation complexity is settable on-line on the basis of the target energy consumption versus implementation complexity tradeoff; 2) it minimizes the network energy consumed by the wireless device for sustaining the migration process under hard constraints on the tolerated migration times and downtimes; and 3) by leveraging a suitably designed adaptive mechanism, it is capable to quickly react to (possibly, unpredicted) fading and/or mobility-induced abrupt changes of the wireless environment without requiring forecasting. The actual effectiveness of the proposed SCBM is supported by extensive energy versus delay performance comparisons that cover: 1) a number of heterogeneous 3G/4G/WiFi FOGRAN scenarios; 2) synthetic and real-world workloads; and, 3) MPTCP and wireless connections
Planning Solar in Energy-managed Cellular Networks
There has been a lot of interest recently on the energy efficiency and
environmental impact of wireless networks. Given that the base stations are the
network elements that use most of this energy, much research has dealt with
ways to reduce the energy used by the base stations by turning them off during
periods of low load. In addition to this, installing a solar harvesting sys-
tem composed of solar panels, batteries, charge con- trollers and inverters is
another way to further reduce the network environmental impact and some
research has been dealing with this for individual base stations. In this
paper, we show that both techniques are tightly coupled. We propose a
mathematical model that captures the synergy between solar installation over a
network and the dynamic operation of energy-managed base stations. We study the
interactions between the two methods for networks of hundreds of base stations
and show that the order in which each method is intro- duced into the system
does make a difference in terms of cost and performance. We also show that
installing solar is not always the best solution even when the unit cost of the
solar energy is smaller than the grid cost. We conclude that planning the solar
installation and energy management of the base stations have to be done
jointly
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
A Survey of Green Networking Research
Reduction of unnecessary energy consumption is becoming a major concern in
wired networking, because of the potential economical benefits and of its
expected environmental impact. These issues, usually referred to as "green
networking", relate to embedding energy-awareness in the design, in the devices
and in the protocols of networks. In this work, we first formulate a more
precise definition of the "green" attribute. We furthermore identify a few
paradigms that are the key enablers of energy-aware networking research. We
then overview the current state of the art and provide a taxonomy of the
relevant work, with a special focus on wired networking. At a high level, we
identify four branches of green networking research that stem from different
observations on the root causes of energy waste, namely (i) Adaptive Link Rate,
(ii) Interface proxying, (iii) Energy-aware infrastructures and (iv)
Energy-aware applications. In this work, we do not only explore specific
proposals pertaining to each of the above branches, but also offer a
perspective for research.Comment: Index Terms: Green Networking; Wired Networks; Adaptive Link Rate;
Interface Proxying; Energy-aware Infrastructures; Energy-aware Applications.
18 pages, 6 figures, 2 table
Applications of Soft Computing in Mobile and Wireless Communications
Soft computing is a synergistic combination of artificial intelligence methodologies to model and solve real world problems that are either impossible or too difficult to model mathematically. Furthermore, the use of conventional modeling techniques demands rigor, precision and certainty, which carry computational cost. On the other hand, soft computing utilizes computation, reasoning and inference to reduce computational cost by exploiting tolerance for imprecision, uncertainty, partial truth and approximation. In addition to computational cost savings, soft computing is an excellent platform for autonomic computing, owing to its roots in artificial intelligence. Wireless communication networks are associated with much uncertainty and imprecision due to a number of stochastic processes such as escalating number of access points, constantly changing propagation channels, sudden variations in network load and random mobility of users. This reality has fuelled numerous applications of soft computing techniques in mobile and wireless communications. This paper reviews various applications of the core soft computing methodologies in mobile and wireless communications
- âŠ