Optimization driven multi-hop network design and experimentation: the approach of the FP7 project OPNEX

International audienceThe OPNEX project exemplifies system and optimization theory as the foundations for algorithms that provably maximize capacity of wireless networks. The algorithms termed in abstract network models have been converted to protocols and architectures practically applicable to wireless systems. A validation methodology through experimental protocol evaluation in real network testbeds has been proposed and used. OPNEX uses recent advances in system theoretic network control, including the Back-Pressure principle, max-weight scheduling, utility optimization, congestion control, and the primal-dual method for extracting network algorithms. These approaches exhibited vast potential for achieving high capacity and full exploitation of resources in abstract network models and found their way to reality in high performance architectures developed as a result of the research conducted within OPNEX

Fine-Granularity Transmission Distortion Modeling for Video Packet Scheduling Over Mesh Networks

Digital Object Identifier 10.1109/TMM.2009.2036290Packet scheduling is a critical component in multi-session video streaming over mesh networks. Different video packets have different levels of contribution to the overall video presentation quality at the receiver side. In this work, we develop a fine-granularity transmission distortion model for the encoder to predict the quality degradation of decoded videos caused by lost video packets. Based on this packet-level transmission distortion model, we propose a content-and-deadline-aware scheduling (CDAS) scheme for multi-session video streaming over multi-hop mesh networks, where content priority, queuing delays, and dynamic network transmission conditions are jointly considered for each video packet. Our extensive experimental results demonstrate that the proposed transmission distortion model and the CDAS scheme significantly improve the performance of multi-session video streaming over mesh networks

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

Joint Optimization of Edge Computing Architectures and Radio Access Networks

Virtualized radio access network (vRAN) architectures and multiple-access edge computing (MEC) systems constitute two key solutions for the emerging Tactile Internet applications and the increasing mobile data traffic. Their efficient deployment, however, requires a careful design tailored to the available network resources and user demand. In this paper, we propose a novel modeling approach and a rigorous analytical framework, MEC-vRAN joint design problem (MvRAN), that minimizes vRAN costs and maximizes MEC performance. Our framework selects jointly the base-station function splits, the fronthaul routing paths, and the placement of MEC functions. We follow a data-driven evaluation method, using topologies of three operational networks and experiments with a typical face-recognition MEC service. Our results reveal that MvRAN achieves significant cost savings (up to 2.5 times) compared to non-optimized centralized RAN or decentralized RAN systems, and MEC pushes the vRAN functions to radio units and hence can increase substantially the network cost.Work supported by the EC under Grant No 761536 (5GTransformer) and by SFI under Grant No 17/CDA/4760

Network Coding on Heterogeneous Multi-Core Processors for Wireless Sensor Networks

While network coding is well known for its efficiency and usefulness in wireless sensor networks, the excessive costs associated with decoding computation and complexity still hinder its adoption into practical use. On the other hand, high-performance microprocessors with heterogeneous multi-cores would be used as processing nodes of the wireless sensor networks in the near future. To this end, this paper introduces an efficient network coding algorithm developed for the heterogenous multi-core processors. The proposed idea is fully tested on one of the currently available heterogeneous multi-core processors referred to as the Cell Broadband Engine