Optimal Sensor Collaboration for Parameter Tracking Using Energy Harvesting Sensors

In this paper, we design an optimal sensor collaboration strategy among neighboring nodes while tracking a time-varying parameter using wireless sensor networks in the presence of imperfect communication channels. The sensor network is assumed to be self-powered, where sensors are equipped with energy harvesters that replenish energy from the environment. In order to minimize the mean square estimation error of parameter tracking, we propose an online sensor collaboration policy subject to real-time energy harvesting constraints. The proposed energy allocation strategy is computationally light and only relies on the second-order statistics of the system parameters. For this, we first consider an offline non-convex optimization problem, which is solved exactly using semidefinite programming. Based on the offline solution, we design an online power allocation policy that requires minimal online computation and satisfies the dynamics of energy flow at each sensor. We prove that the proposed online policy is asymptotically equivalent to the optimal offline solution and show its convergence rate and robustness. We empirically show that the estimation performance of the proposed online scheme is better than that of the online scheme when channel state information about the dynamical system is available in the low SNR regime. Numerical results are conducted to demonstrate the effectiveness of our approach

Sensor selection and distributed quantization for energy efficiency in massive MTC

This paper presents an estimation approach within the framework of uplink massive machine-type-communications (mMTC) that considers the energy limitations of the devices. We focus on a scenario where a group of sensors observe a set of parameters and send the measured information to a collector node (CN). The CN is responsible for estimating the original observations, which are spatially correlated and corrupted by measurement and quantization noise. Given the use of Gaussian sources, the minimum mean squared error (MSE) estimation is employed and, when considering temporal evolution, the use of Kalman filters is studied. Based on that, we propose a device selection strategy to reduce the number of active sensors and a quantization scheme with adjustable number of bits to minimize the overall payload. The set of selected sensors and quantization levels are, thus, designed to minimize the MSE. For a more realistic analysis, communication errors are also included by averaging the MSE over the error decoding probabilities. We evaluate the performance of our strategy in a practical mMTC system with synthetic and real databases. Simulation results show that the optimization of the payload and the set of active devices can reduce the power consumption without compromising the estimation accuracy.The work presented in this paper has been carried out within the framework of the project ROUTE56 (PID2019-104945GB-I00/ AEI/10.13039/501100011033) funded by the Agencia Estatal de Investigación (Spanish Ministry of Science and Innovation); the FPI grant BES-2017-079994, funded by the Spanish Ministry of Science, Innovation and Universities; and the grant 2017 SGR 578, funded by the Catalan Government (AGAUR, Departament de Rercerca i Universitats, Generalitat de Catalunya).Peer ReviewedPostprint (author's final draft

Resource Management for Distributed Estimation via Sparsity-Promoting Regularization

Recent advances in wireless communications and electronics have enabled the development of low-cost, low-power, multifunctional sensor nodes that are small in size and communicate untethered in a sensor network. These sensor nodes can sense, measure, and gather information from the environment and, based on some local processing, they transmit the sensed data to a fusion center that is responsible for making the global inference. Sensor networks are often tasked to perform parameter estimation; example applications include battlefield surveillance, medical monitoring, and navigation. However, under limited resources, such as limited communication bandwidth and sensor battery power, it is important to design an energy-efficient estimation architecture. The goal of this thesis is to provide a fundamental understanding and characterization of the optimal tradeoffs between estimation accuracy and resource usage in sensor networks. In the thesis, two basic issues of resource management are studied, sensor selection/scheduling and sensor collaboration for distributed estimation, where the former refers to finding the best subset of sensors to activate for data acquisition in order to minimize the estimation error subject to a constraint on the number of activations, and the latter refers to seeking the optimal inter-sensor communication topology and energy allocation scheme for distributed estimation systems. Most research on resource management so far has been based on several key assumptions, a) independence of observation, b) strict resource constraints, and c) absence of inter-sensor communication, which lend analytical tractability to the problem but are often found lacking in practice. This thesis introduces novel techniques to relax these assumptions and provide new insights into addressing resource management problems. The thesis analyzes how noise correlation affects solutions of sensor selection problems, and proposes both a convex relaxation approach and a greedy algorithm to find these solutions. Compared to the existing sensor selection approaches that are limited to the case of uncorrelated noise or weakly correlated noise, the methodology proposed in this thesis is valid for any arbitrary noise correlation regime. Moreover, this thesis shows a correspondence between active sensors and the nonzero columns of an estimator gain matrix. Based on this association, a sparsity-promoting optimization framework is established, where the desire to reduce the number of selected sensors is characterized by a sparsity-promoting penalty term in the objective function. Instead of placing a hard constraint on sensor activations, the promotion of sparsity leads to trade-offs between estimation performance and the number of selected sensors. To account for the individual power constraint of each sensor, a novel sparsity-promoting penalty function is presented to avoid scenarios in which the same sensors are successively selected. For solving the proposed optimization problem, we employ the alternating direction method of multipliers (ADMM), which allows the optimization problem to be decomposed into subproblems that can be solved analytically to obtain exact solutions. The problem of sensor collaboration arises when inter-sensor communication is incorporated in sensor networks, where sensors are allowed to update their measurements by taking a linear combination of the measurements of those they interact with prior to transmission to a fusion center. In this thesis, a sparsity-aware optimization framework is presented for the joint design of optimal sensor collaboration and selection schemes, where the cost of sensor collaboration is associated with the number of nonzero entries of a collaboration matrix, and the cost of sensor selection is characterized by the number of nonzero rows of the collaboration matrix. It is shown that a) the presence of sensor collaboration smooths out the observation noise, thereby improving the quality of the signal and eventual estimation performance, and b) there exists a trade-off between sensor selection and sensor collaboration. This thesis further addresses the problem of sensor collaboration for the estimation of time-varying parameters in dynamic networks that involve, for example, time-varying observation gains and channel gains. Impact of parameter correlation and temporal dynamics of sensor networks on estimation performance is illustrated from both theoretical and practical points of view. Last but not least, optimal energy allocation and storage control polices are designed in sensor networks with energy-harvesting nodes. We show that the resulting optimization problem can be solved as a special nonconvex problem, where the only source of nonconvexity can be isolated to a constraint that contains the difference of convex functions. This specific problem structure enables the use of a convex-concave procedure to obtain a near-optimal solution

On Power Allocation for Distributed Detection with Correlated Observations and Linear Fusion

We consider a binary hypothesis testing problem in an inhomogeneous wireless sensor network, where a fusion center (FC) makes a global decision on the underlying hypothesis. We assume sensors observations are correlated Gaussian and sensors are unaware of this correlation when making decisions. Sensors send their modulated decisions over fading channels, subject to individual and/or total transmit power constraints. For parallel-access channel (PAC) and multiple-access channel (MAC) models, we derive modified deflection coefficient (MDC) of the test statistic at the FC with coherent reception.We propose a transmit power allocation scheme, which maximizes MDC of the test statistic, under three different sets of transmit power constraints: total power constraint, individual and total power constraints, individual power constraints only. When analytical solutions to our constrained optimization problems are elusive, we discuss how these problems can be converted to convex ones. We study how correlation among sensors observations, reliability of local decisions, communication channel model and channel qualities and transmit power constraints affect the reliability of the global decision and power allocation of inhomogeneous sensors

Level based sampling techniques for energy conservation in large scale wireless sensor networks

As the size and node density of wireless sensor networks (WSN) increase,the energy conservation problem becomes more critical and the conventional methods become inadequate. This dissertation addresses two different problems in large scale WSNs where all sensors are involved in monitoring,but the traditional practice of periodic transmissions of observations from all sensors would drain excessive amount of energy. In the first problem,monitoring of the spatial distribution of a two dimensional correlated signal is considered using a large scale WSN. It is assumed that sensor observations are heavily affected by noise. We present an approach that is based on detecting contour lines of the signal distribution to estimate the spatial distribution of the signal without involving all sensors in the network. Energy efficient algorithms are proposed for detecting and tracking the temporal variation of the contours. Optimal contour levels that minimize the estimation error and a practical approach for selection of contour levels are explored. Performance of the proposed algorithm is explored with different types of contour levels and detection parameters. In the second problem,a WSN is considered that performs health monitoring of equipment from a power substation. The monitoring applications require transmissions of sensor observations from all sensor nodes on a regular basis to the base station,which is very costly in terms of communication cost. To address this problem,an efficient sampling technique using level-crossings (LCS) is proposed. This technique saves communication cost by suppressing transmissions of data samples that do not convey much information. The performance and cost of LCS for several different level-selection schemes are investigated. The number of required levels and the maximum sampling period for practical implementation of LCS are studied. Finally,in an experimental implementation of LCS with MICAzmote,the performance and cost of LCS for temperature sensing with uniform,logarithmic and a combined version of uniform and logarithmically spaced levels are compared with that using periodic sampling

Parallel Quantum-Enhanced Sensing

Quantum metrology takes advantage of quantum correlations to enhance the sensitivity of sensors and measurement techniques beyond their fundamental classical limit given by the shot noise limit. The use of both temporal and spatial correlations present in quantum states of light can extend quantum-enhanced sensing to a parallel configuration that can simultaneously probe an array of sensors or independently measure multiple parameters. To this end, we use multi-spatial mode twin beams of light, which are characterized by independent quantum-correlated spatial subregions in addition to quantum temporal correlations, to probe a four-sensor quadrant plasmonic array. We show that it is possible to independently and simultaneously measure local changes in refractive index for all four sensors with a quantum enhancement in sensitivity in the range of $22\%$ to $24\%$ over the corresponding classical configuration. These results provide a first step towards highly parallel spatially resolved quantum-enhanced sensing techniques and pave the way toward more complex quantum sensing and quantum imaging platforms