CoReDac: Collision-Free Command-Response Data Collection

Intenerg

An Energy Driven Architecture for Wireless Sensor Networks

Most wireless sensor networks operate with very limited energy sources-their batteries, and hence their usefulness in real life applications is severely constrained. The challenging issues are how to optimize the use of their energy or to harvest their own energy in order to lengthen their lives for wider classes of application. Tackling these important issues requires a robust architecture that takes into account the energy consumption level of functional constituents and their interdependency. Without such architecture, it would be difficult to formulate and optimize the overall energy consumption of a wireless sensor network. Unlike most current researches that focus on a single energy constituent of WSNs independent from and regardless of other constituents, this paper presents an Energy Driven Architecture (EDA) as a new architecture and indicates a novel approach for minimising the total energy consumption of a WS

Unified clustering and communication protocol for wireless sensor networks

In this paper we present an energy-efficient cross layer protocol for providing application specific reservations in wireless senor networks called the “Unified Clustering and Communication Protocol ” (UCCP). Our modular cross layered framework satisfies three wireless sensor network requirements, namely, the QoS requirement of heterogeneous applications, energy aware clustering and data forwarding by relay sensor nodes. Our unified design approach is motivated by providing an integrated and viable solution for self organization and end-to-end communication is wireless sensor networks. Dynamic QoS based reservation guarantees are provided using a reservation-based TDMA approach. Our novel energy-efficient clustering approach employs a multi-objective optimization technique based on OR (operations research) practices. We adopt a simple hierarchy in which relay nodes forward data messages from cluster head to the sink, thus eliminating the overheads needed to maintain a routing protocol. Simulation results demonstrate that UCCP provides an energy-efficient and scalable solution to meet the application specific QoS demands in resource constrained sensor nodes. Index Terms — wireless sensor networks, unified communication, optimization, clustering and quality of service

Data collection and transmission for leisure time boats : based on Arduino WSNs and LTE

There has been an astonishing research development in the field of wireless sensor networks (WSNs) in the last decade. A large number of low power capacity devices have been implemented in different vehicles, where sensor nodes act as a team to monitor the environment and forecast the potential defects. In this thesis, we aim to design a data collection system using a WSN on a leisure boat in order to monitor and maintain the boat after sale. The designed system aims to collect data from different sensors on board using WSNs and transmits the collected data to a remote server through cellular network. For the WSNs part, we select a low-power driven Adruino Lilypad as a controller and a XBee interface as transceiver for each sensor node in order to provide a reliable data collection mechanism with a low amount of power consumption. Furthermore, to upload the collected data to a remote server, we adopt a 3G/LTE cellular network for the long range wireless communication. We utilize a PandaBoard as a gateway to connect the WSN and the 3G/LTE network. The designed network is implemented and tested in a lab scenario at university and on a Marex boat along the coast

Towards efficient coexistence of IEEE 802.15.4e TSCH and IEEE 802.11

A major challenge in wide deployment of smart wireless devices, using different technologies and sharing the same 2.4 GHz spectrum, is to achieve coexistence across multiple technologies. The IEEE~802.11 (WLAN) and the IEEE 802.15.4e TSCH (WSN) where designed with different goals in mind and both play important roles for respective applications. However, they cause mutual interference and degraded performance while operating in the same space. To improve this situation we propose an approach to enable a cooperative control which type of network is transmitting at given time, frequency and place. We recognize that TSCH based sensor network is expected to occupy only small share of time, and that the nodes are by design tightly synchronized. We develop mechanism enabling over-the-air synchronization of the Wi-Fi network to the TSCH based sensor network. Finally, we show that Wi-Fi network can avoid transmitting in the "collision periods". We provide full design and show prototype implementation based on the Commercial off-the-shelf (COTS) devices. Our solution does not require changes in any of the standards.Comment: 8 page

Cooperative Hyper-Scheduling based improving Energy Aware Life Time Maximization in Wireless Body Sensor Network Using Topology Driven Clustering Approach

The Wireless Body Sensor Network (WBSN) is an incredible developing data transmission network for modern day communication especially in Biosensor device networks. Due to energy consumption in biomedical data transfer have impacts of sink nodes get loss information on each duty cycle because of Traffic interruptions. The reason behind the popularity of WBSN characteristics contains number of sensor nodes to transmit data in various dense regions. Due to increasing more traffic, delay, bandwidth consumption, the energy losses be occurred to reduce the lifetime of the WBSN transmission. So, the sensor nodes are having limited energy or power, by listening to the incoming signals, it loses certain amount of energy to make data losses because of improper route selection. To improve the energy aware lifetime maximization through Traffic Aware Routing (TAR) based on scheduling. Because the performance of scheduling is greatly depending on the energy of nodes and lifetime of the network. To resolve this problem, we propose a Cooperative Hyper-scheduling (CHS) based improving energy aware life time maximization (EALTM) in Wireless Body sensor network using Topology Driven Clustering Approach (TDCA).Initially the method maintains the traces of transmission performed by different Bio-sensor nodes in different duty cycle. The method considers the energy of different nodes and history of earlier transmission from the Route Table (RT) whether the transmission behind the Sink node. Based on the RT information route discovery was performed using Traffic Aware Neighbors Discovery (TAND) to estimate Data Transmission Support Measure (DTSM) on each Bio-sensor node which its covers sink node. These nodes are grouped into topology driven clustering approach for route optimization. Then the priority is allocated based on The Max-Min DTSM, the Cooperative Hyper-scheduling was implemented to schedule the transmission with support of DTSM to reduce the energy losses in WBSN. This improves the energy level to maximization the life time of data transmission in WBSN than other methods to produce best performance in throughput energy level