Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View

Small satellite systems enable whole new class of missions for navigation, communications, remote sensing and scientific research for both civilian and military purposes. As individual spacecraft are limited by the size, mass and power constraints, mass-produced small satellites in large constellations or clusters could be useful in many science missions such as gravity mapping, tracking of forest fires, finding water resources, etc. Constellation of satellites provide improved spatial and temporal resolution of the target. Small satellite constellations contribute innovative applications by replacing a single asset with several very capable spacecraft which opens the door to new applications. With increasing levels of autonomy, there will be a need for remote communication networks to enable communication between spacecraft. These space based networks will need to configure and maintain dynamic routes, manage intermediate nodes, and reconfigure themselves to achieve mission objectives. Hence, inter-satellite communication is a key aspect when satellites fly in formation. In this paper, we present the various researches being conducted in the small satellite community for implementing inter-satellite communications based on the Open System Interconnection (OSI) model. This paper also reviews the various design parameters applicable to the first three layers of the OSI model, i.e., physical, data link and network layer. Based on the survey, we also present a comprehensive list of design parameters useful for achieving inter-satellite communications for multiple small satellite missions. Specific topics include proposed solutions for some of the challenges faced by small satellite systems, enabling operations using a network of small satellites, and some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications Surveys and Tutorial

An Efficient Beam Steerable Antenna Array Concept for Airborne Applications

Deployment of a satellite borne, steerable antenna array with higher directivity and gain in Low Earth Orbit makes sense to reduce ground station complexity and cost, while still maintaining a reasonable link budget. The implementation comprises a digitally beam steerable phased array antenna integrated with a complete system, comprising the antenna, hosting platform, ground station, and aircraft based satellite emulator to facilitate convenient aircraft based testing of the antenna array and ground-space communication link. This paper describes the design, development and initial successful interim testing of the various subsystems. A two element prototype used in this increases the signal-to-noise ratio (SNR) by 3 dB which is corresponding to more than 10 times better bit error rate (BER)

Miniaturized antenna and transponder based wireless sensors for internet of things in healthcare

Future medical and healthcare systems will be largely improved by the wide-spreading of internet of things (IoTs). One of the crucial challenges of IoTs for healthcare is at the wireless sensors. Miniaturization of sensor node profile, minimizing power consumption as well as lowering down design/production cost of antenna, RF circuits and sensor modules have become the key issues for realizing more exciting applications in medical and healthcare fields that never seemed to be possible before. In this dissertation work, we first focus on electrically small antenna (ESA) design and fabrication for medical telemetry. A comprehensive analysis of the radiation properties of a novel electrically small folded ellipsoidal ESA is presented, showing its ability to self-resonate and impedance match without external components. It will benefit various size-restricted applications especially with wireless medical implants. The second focus is on healthcare sensors using ESA as the sensing agent, which saves the power and cost by eliminating the need of extra sensing modules. Specifically, miniaturized helix ESAs are integrated with drug reservoirs to function as wireless transponder sensors for real-time drug dosage monitoring. We also introduce a system level innovation of a passive wireless harmonic transponder/harmonic sniffer/frequency hopped interrogator based sensing system. The μL- liquid level resolution and absolute-accuracy passive sensing is demonstrated in the presence of strong direct coupling, background scatters, distance variance as well as near-filed human body movement interference. Furthermore, we investigate how modern ubiquitous wireless sensor networks could take advantage of sensitive nanostructure materials for enhanced performance. Here we propose a new paradigm of chemically-gated mixed modulation on a single homogeneous graphene device in which the chemical exposure directly modulates an electrical carrier signal. To make the device ubiquitously reusable, a method of precisely tuning the charge neutrality point (Vcnp) is introduced by electrochemical calibration with gate voltage pulse sequence. Such chemically gated graphene modulator can be potentially used in a harmonic transponder as a passive ubiquitous sensor node for chemical and bio sensing applications. Overall the research work presented in the dissertation will help enable cost and power-efficient wireless sensor networks in future healthcare IoTs.Electrical and Computer Engineerin

Antenna Development in Brain-Implantable Biotelemetric Systems for Next-Generation of Human Healthcare

In the growing efforts of promoting patients’ life quality through health technology solutions, implantable wireless medical devices (IMDs) have been identified as one of the frontrunners. They are bringing compelling wireless solutions for medical diagnosis and treatment through bio-telemetric systems that deliver real-time transmission of in-body physiological data to an external monitoring/control unit. To set up this bidirectional wireless biomedical communication link for the long- term, the IMDs need small and efficient antennas. Designing antenna-enabled biomedical telemetry is a challenging aim, which must fulfill demanding issues and criteria including miniaturization, appropriate radiation performance, bandwidth enhancement, good impedance matching, and biocompatibility. Overcoming the size restriction mainly depends on the resonant frequency of the required applications. Defined frequency bands for biomedical telemetry systems contain the Medical Implant Communication Service (MICS) operating at the frequency band of 402– 405 MHz, Medical Device Radiocommunication Service (MedRadio) resonating at the frequency ranges of 401– 406 MHz, 413 – 419 MHz, 426 – 432 MHz, 438 – 444 MHz, and 451 – 457 MHz, Wireless Medical Telemetry Service (WMTS) operating at frequency specturms of 1395 to 1400 MHz and 1427 to 1432 MHz, and Industrial, Scientific, and Medical (ISM) bands of 433.1–434.8 MHz, 868–868.6 MHz, 902.8–928.0 MHz, and 2.4–2.48 GHz. On the other hand, a single band antenna may not fulfill all requirements of a bio-telemetry system in either MedRadio, WMTS, or ISM bands. As a result, analyzing dual/multi-band implantable antenna supporting wireless power, data transmission, and control signaling can meet the demand for multitasking biotelemetry systems. In addition, among different antenna structures, PIFA has been found a promising type in terms of size-performance balance in lossy human tissues. To overcome the above-mentioned challenges, this thesis, first, starts with a discussion of antenna radiation in a lossy medium, the requirements of implantable antenna development, and numerical modeling of the human head tissues. In the following discussion, we concentrate on approaching a new design for far-field small antennas integrated into brain-implantable biotelemetric systems that provide attractive features for versatile functions in modern medical applications. To this end, we introduce three different implantable antenna structures including a compact dual-band PIFA, a miniature triple-band PIFA and a small quad-band PIFA for brain care applications. The compelling performance of the proposed antennas is analyzed and discussed with simulation results and the triple-band PIFA is evaluated using simulation outcomes compared with the measurement results of the fabricated prototype. Finally, the first concept and platform of in-body and off-body units are proposed for wireless dopamine monitoring as a brain care application. In addition to the main focus of this thesis, in the second stage, we focus on introducing an equivalent circuit model to the electrical connector-line transition. We present a data fitting technique for two transmission lines characterization independent of the dielectric properties of the substrate materials at the ultra-high frequency band (UHF). This approach is a promising solution for the development of wearable and off-body antennas employing textile materials in biomedical telemetry systems. The approach method is assessed with measurement results of several fabricated transmission lines on different substrate materials

Antenna Systems

This book offers an up-to-date and comprehensive review of modern antenna systems and their applications in the fields of contemporary wireless systems. It constitutes a useful resource of new material, including stochastic versus ray tracing wireless channel modeling for 5G and V2X applications and implantable devices. Chapters discuss modern metalens antennas in microwaves, terahertz, and optical domain. Moreover, the book presents new material on antenna arrays for 5G massive MIMO beamforming. Finally, it discusses new methods, devices, and technologies to enhance the performance of antenna systems

A Cognitive Routing framework for Self-Organised Knowledge Defined Networks

This study investigates the applicability of machine learning methods to the routing protocols for achieving rapid convergence in self-organized knowledge-defined networks. The research explores the constituents of the Self-Organized Networking (SON) paradigm for 5G and beyond, aiming to design a routing protocol that complies with the SON requirements. Further, it also exploits a contemporary discipline called Knowledge-Defined Networking (KDN) to extend the routing capability by calculating the “Most Reliable” path than the shortest one. The research identifies the potential key areas and possible techniques to meet the objectives by surveying the state-of-the-art of the relevant fields, such as QoS aware routing, Hybrid SDN architectures, intelligent routing models, and service migration techniques. The design phase focuses primarily on the mathematical modelling of the routing problem and approaches the solution by optimizing at the structural level. The work contributes Stochastic Temporal Edge Normalization (STEN) technique which fuses link and node utilization for cost calculation; MRoute, a hybrid routing algorithm for SDN that leverages STEN to provide constant-time convergence; Most Reliable Route First (MRRF) that uses a Recurrent Neural Network (RNN) to approximate route-reliability as the metric of MRRF. Additionally, the research outcomes include a cross-platform SDN Integration framework (SDN-SIM) and a secure migration technique for containerized services in a Multi-access Edge Computing environment using Distributed Ledger Technology. The research work now eyes the development of 6G standards and its compliance with Industry-5.0 for enhancing the abilities of the present outcomes in the light of Deep Reinforcement Learning and Quantum Computing

A Novel Power-Efficient Wireless Multi-channel Recording System for the Telemonitoring of Electroencephalography (EEG)

This research introduces the development of a novel EEG recording system that is modular, batteryless, and wireless (untethered) with the supporting theoretical foundation in wireless communications and related design elements and circuitry. Its modular construct overcomes the EEG scaling problem and makes it easier for reconfiguring the hardware design in terms of the number and placement of electrodes and type of standard EEG system contemplated for use. In this development, portability, lightweight, and applicability to other clinical applications that rely on EEG data are sought. Due to printer tolerance, the 3D printed cap consists of 61 electrode placements. This recording capacity can however extend from 21 (as in the international 10-20 systems) up to 61 EEG channels at sample rates ranging from 250 to 1000 Hz and the transfer of the raw EEG signal using a standard allocated frequency as a data carrier. The main objectives of this dissertation are to (1) eliminate the need for heavy mounted batteries, (2) overcome the requirement for bulky power systems, and (3) avoid the use of data cables to untether the EEG system from the subject for a more practical and less restrictive setting. Unpredictability and temporal variations of the EEG input make developing a battery-free and cable-free EEG reading device challenging. Professional high-quality and high-resolution analog front ends are required to capture non-stationary EEG signals at microvolt levels. The primary components of the proposed setup are the wireless power transmission unit, which consists of a power amplifier, highly efficient resonant-inductive link, rectification, regulation, and power management units, as well as the analog front end, which consists of an analog to digital converter, pre-amplification unit, filtering unit, host microprocessor, and the wireless communication unit. These must all be compatible with the rest of the system and must use the least amount of power possible while minimizing the presence of noise and the attenuation of the recorded signal A highly efficient resonant-inductive coupling link is developed to decrease power transmission dissipation. Magnetized materials were utilized to steer electromagnetic flux and decrease route and medium loss while transmitting the required energy with low dissipation. Signal pre-amplification is handled by the front-end active electrodes. Standard bio-amplifier design approaches are combined to accomplish this purpose, and a thorough investigation of the optimum ADC, microcontroller, and transceiver units has been carried out. We can minimize overall system weight and power consumption by employing battery-less and cable-free EEG readout system designs, consequently giving patients more comfort and freedom of movement. Similarly, the solutions are designed to match the performance of medical-grade equipment. The captured electrical impulses using the proposed setup can be stored for various uses, including classification, prediction, 3D source localization, and for monitoring and diagnosing different brain disorders. All the proposed designs and supporting mathematical derivations were validated through empirical and software-simulated experiments. Many of the proposed designs, including the 3D head cap, the wireless power transmission unit, and the pre-amplification unit, are already fabricated, and the schematic circuits and simulation results were based on Spice, Altium, and high-frequency structure simulator (HFSS) software. The fully integrated head cap to be fabricated would require embedding the active electrodes into the 3D headset and applying current technological advances to miniaturize some of the design elements developed in this dissertation

Cost based optimization for strategic mobile radio access network planning using metaheuristics

La evolución experimentada por las comunicaciones móviles a lo largo de las últimas décadas ha sido motivada por dos factores principales: el surgimiento de nuevas aplicaciones y necesidades por parte del usuario, así como los avances tecnológicos. Los servicios ofrecidos para términales móviles han evolucionado desde el clásico servicio de voz y mensajes cortos (SMS), a servicios más atractivos y por lo tanto con una rápida aceptación por parte de usuario final como, video telephony, video streaming, online gaming, and the internet broadband access (MBAS). Todos estos nuevos servicios se han convertido en una realidad gracias a los avances técnologicos, avances tales como nuevas técnicas de acceso al medio compartido, nuevos esquemas de codificiación y modulación de la información intercambiada, sistemas de transmisión y recepción basados en múltiples antenas (MIMO), etc. Un aspecto importante en esta evolución fue la liberación del sector a principios de los años 90, donde la función reguladora llevado a cabo por las autoridades regulatorias nacionales (NRA) se ha antojado fundamental. Uno de los principales problemas tratados por la NRA espcífica de cada nación es la determinación de los costes por servicios mayoristas, esto es los servicios entre operadores de servicios móvilles, entre los que cabe destacar el coste por terminación de llamada o de inteconexión. El servicio de interconexión hace posible la comunicación de usuarios de diferente operadores, así como el acceso a la totalidad de servicios, incluso a aquellos no prestados por un operador en concreto gracias al uso de una red perteneciente a otro operador, por parte de todos los usuarios. El objetivo principal de esta tesis es la minimización de los costes de inversión en equipamiento de red, lo cual repercute en el establecimiento de las tarifas de interconexión como se verá a lo largo de este trabajo. La consecución de dicho objetivo se divide en dos partes: en primer lugar, el desarrollo de un conjunto de algoritmos para el dimesionado óptimo de una red de acceso radio (RAN) para un sistema de comunicaciones móvilles. En segundo lugar, el diseño y aplicación de algoritmos de optimización para la distribución óptima de los servicios sobre el conjunto de tecnologías móviles existentes (OSDP). El modulo de diseño de red proporciona cuatro algoritmos diferenciados encargados del dimensionado y planificación de la red de acceso móvil. Estos algoritmos se aplican en un entorno multi-tecnología, considerando sistemas de segunda (2G), tercera (3G) y cuarta (4G) generación, multi-usuario, teniendo en cuenta diferentes perfiles de usuarios con su respectiva carga de tráfico, y multo-servicio, incluyendo voz, servicios de datos de baja velocidad (64-144 Kbps), y acceso a internet de banda ancha móvil. La segunda parte de la tesis se encarga de distribuir de una manera óptima el conjunto de servicios sobre las tecnologías a desplegar. El objetivo de esta parte es hacer un uso eficiente de las tecnologías existentes reduciendo los costes de inversión en equipamiento de red. Esto es posible gracias a las diferencias tecnológicas existente entre los diferentes sistemas móviles, que hacen que los sistemas de segunda generación sean adecuados para proporcionar el servicio de voz y mensajería corta, mientras que redes de tercera generación muestran un mejor rendimiento en la transmisión de servicios de datos. Por último, el servicio de banda ancha móvil es nativo de redes de última generadón, como High Speed Data Acces (HSPA) y 4G. Ambos módulos han sido aplicados a un extenso conjunto de experimentos para el desarrollo de análisis tecno-económicos tales como el estudio del rendimiento de las tecnologías de HSPA y 4G para la prestación del servicio de banda ancha móvil, así como el análisis de escenarios reales de despliegue para redes 4G que tendrán lugar a partir del próximo año coinicidiendo con la licitación de las frecuencias en la banda de 800 MHz. Así mismo, se ha llevado a cabo un estudio sobre el despliegue de redes de 4G en las bandas de 800 MHz, 1800 MHz y 2600 MHz, comparando los costes de inversión obtenidos tras la optimización. En todos los casos se ha demostrado la mejora, en términos de costes de inversión, obtenida tras la aplicación de ambos módulos, posibilitando una reducción en la determinación de los costes de provisión de servicios. Los estudios realizados en esta tesis se centran en la nación de España, sin embargo todos los algoritmos implementados son aplicables a cualquier otro país europeo, prueba de ello es que los algoritmos de diseño de red han sido utilizados en diversos proyectos de regulación