Using Channel Output Feedback to Increase Throughput in Hybrid-ARQ

Hybrid-ARQ protocols have become common in many packet transmission systems due to their incorporation in various standards. Hybrid-ARQ combines the normal automatic repeat request (ARQ) method with error correction codes to increase reliability and throughput. In this paper, we look at improving upon this performance using feedback information from the receiver, in particular, using a powerful forward error correction (FEC) code in conjunction with a proposed linear feedback code for the Rayleigh block fading channels. The new hybrid-ARQ scheme is initially developed for full received packet feedback in a point-to-point link. It is then extended to various different multiple-antenna scenarios (MISO/MIMO) with varying amounts of packet feedback information. Simulations illustrate gains in throughput.Comment: 30 page

Energy Optimization for Hybrid ARQ

Hybrid automatic repeat request (HARQ) \cite{costello1983error} plays an important role in providing reliable and efficient data transmission. In wireless communications, the wireless channel may vary fast, due to the mobility of the transmitter/receiver and the channel. Forward error correction (FEC) and automatic repeat request (ARQ) are two basic techniques to control errors. FEC employs error correction coding, by adding parity bits to the information bits, to combat channel errors. ARQ allows the receiver to request a retransmission of the packet when an error is detected in the received packet. HARQ gives protection to the wireless transmission by combining FEC and ARQ. In typical HARQ systems, redundancy is added to the information bits, and a retransmission is performed until either the packet is successfully decoded, or a maximum number of transmissions is reached.The motivation to optimize the energy consumption of HARQ is the high energy consumption of wireless communications on mobile devices. Wireless devices usually have a limited battery life, and wireless communications consume the majority of the battery energy of mobile devices. One example is that 3G and Wifi units consume more than 50\% of the energy for some smart phones \cite{tawalbeh2016studying}. Another example is that battery depletion has been identified as one of the primary factors that limit the lifetime of wireless sensor networks \cite{verdone2010wireless}.Previous works on HARQ mainly use information-theoretic approach, which assumes that the number of bits in each transmission round is sufficiently large. This assumption does not necessarily hold for actual codes with finite length. Therefore, in this dissertation, we consider HARQ with actual codes. We use turbo-coded HARQ, since turbo codes are well-known capacity-approaching codes \cite{berrou1993near} and widely used in standards such as 3GPP Long-Term Evolution (LTE) \cite{3gpp2007mulltiplexing}. We study the energy optimization for HARQ in two scenarios: the energy optimization for incremental redundancy (IR) HARQ, and the energy optimization for HARQ in wireless video transmission. For IR HARQ, each retransmission contains additional parity bits beyond those of the previous transmissions. For the first scenario, we consider different cases of channel state information (CSI) at the transmitter: the transmitter has no knowledge of any CSI, or knows the CSI in previous transmission rounds through a perfect feedback channel, or knows both current and previous CSI. The transmitter decides the forward error correction code rate based on the CSI it has. We minimize the energy consumption of turbo-coded HARQ, subject to a packet loss rate constraint. Numerical results show that the energy consumption of HARQ decreases when more CSI information is available at the transmitter. We also compare IR combining with both Chase combining and the system without combining, and IR combining yields the least energy consumption.For the second scenario, we formulate the problem as maximizing the video quality, subject to a constraint on the wireless transmission energy consumption. We consider multiple parameters in multiple layers in a wireless video transmission system: transmit power, alphabet size, FEC code rate, maximum number of transmissions and unequal video data importance. An analytical framework is proposed to include these parameters, which allows us to divide this problem into two sub-problems: data transmission and unequal error protection (UEP) for video content. The problem is tackled by solving the two sub-problems, which are done by exhaustive search and convex optimization, respectively. Simulations of different videos show that the proposed scheme outperforms methods using conventional data transmission and/or unequal error protection. For example, in the low SNR region, there is a total gain of 4.8 to 5.6dB on the peak signal-to-noise ratio of the received video compared to video transmission using conventional HARQ without any video UEP

Resource Allocation Frameworks for Network-coded Layered Multimedia Multicast Services

The explosive growth of content-on-the-move, such as video streaming to mobile devices, has propelled research on multimedia broadcast and multicast schemes. Multi-rate transmission strategies have been proposed as a means of delivering layered services to users experiencing different downlink channel conditions. In this paper, we consider Point-to-Multipoint layered service delivery across a generic cellular system and improve it by applying different random linear network coding approaches. We derive packet error probability expressions and use them as performance metrics in the formulation of resource allocation frameworks. The aim of these frameworks is both the optimization of the transmission scheme and the minimization of the number of broadcast packets on each downlink channel, while offering service guarantees to a predetermined fraction of users. As a case of study, our proposed frameworks are then adapted to the LTE-A standard and the eMBMS technology. We focus on the delivery of a video service based on the H.264/SVC standard and demonstrate the advantages of layered network coding over multi-rate transmission. Furthermore, we establish that the choice of both the network coding technique and resource allocation method play a critical role on the network footprint, and the quality of each received video layer.Comment: IEEE Journal on Selected Areas in Communications - Special Issue on Fundamental Approaches to Network Coding in Wireless Communication Systems. To appea

Time diversity solutions to cope with lost packets

A dissertation submitted to Departamento de Engenharia Electrotécnica of Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Engenharia Electrotécnica e de ComputadoresModern broadband wireless systems require high throughputs and can also have very high Quality-of-Service (QoS) requirements, namely small error rates and short delays. A high spectral efficiency is needed to meet these requirements. Lost packets, either due to errors or collisions, are usually discarded and need to be retransmitted, leading to performance degradation. An alternative to simple retransmission that can improve both power and spectral efficiency is to combine the signals associated to different transmission attempts. This thesis analyses two time diversity approaches to cope with lost packets that are relatively similar at physical layer but handle different packet loss causes. The first is a lowcomplexity Diversity-Combining (DC) Automatic Repeat reQuest (ARQ) scheme employed in a Time Division Multiple Access (TDMA) architecture, adapted for channels dedicated to a single user. The second is a Network-assisted Diversity Multiple Access (NDMA) scheme, which is a multi-packet detection approach able to separate multiple mobile terminals transmitting simultaneously in one slot using temporal diversity. This thesis combines these techniques with Single Carrier with Frequency Division Equalizer (SC-FDE) systems, which are widely recognized as the best candidates for the uplink of future broadband wireless systems. It proposes a new NDMA scheme capable of handling more Mobile Terminals (MTs) than the user separation capacity of the receiver. This thesis also proposes a set of analytical tools that can be used to analyse and optimize the use of these two systems. These tools are then employed to compare both approaches in terms of error rate, throughput and delay performances, and taking the implementation complexity into consideration. Finally, it is shown that both approaches represent viable solutions for future broadband wireless communications complementing each other.Fundação para a Ciência e Tecnologia - PhD grant(SFRH/BD/41515/2007); CTS multi-annual funding project PEst-OE/EEI/UI0066/2011, IT pluri-annual funding project PEst-OE/EEI/LA0008/2011, U-BOAT project PTDC/EEATEL/ 67066/2006, MPSat project PTDC/EEA-TEL/099074/2008 and OPPORTUNISTICCR project PTDC/EEA-TEL/115981/200

Application of SDMA with scheduling for MIMO MC-CDMA

Incoming Beyond 3G systems provides high data rates by using several techniques including Beamforming. Convenient DRA design is required to optimize the capabilities offered by smart antennas. This paper is to presents a DRA algorithm based on the HSDPA of UMTS, including scheduling that exploit SDMA technique that was implemented in the ambit of the IST 4MORE project. Results shown cell throughput gain of SDMA compared to sectorized cells about 76%, and that SDMA gain will increase with user diversity within the cell