Airborne chemical sensing with mobile robots

Airborne chemical sensing with mobile robots has been an active research areasince the beginning of the 1990s. This article presents a review of research work in this field,including gas distribution mapping, trail guidance, and the different subtasks of gas sourcelocalisation. Due to the difficulty of modelling gas distribution in a real world environmentwith currently available simulation techniques, we focus largely on experimental work and donot consider publications that are purely based on simulations

Collective Odor Source Estimation and Search in Time-Variant Airflow Environments Using Mobile Robots

This paper addresses the collective odor source localization (OSL) problem in a time-varying airflow environment using mobile robots. A novel OSL methodology which combines odor-source probability estimation and multiple robots’ search is proposed. The estimation phase consists of two steps: firstly, the separate probability-distribution map of odor source is estimated via Bayesian rules and fuzzy inference based on a single robot’s detection events; secondly, the separate maps estimated by different robots at different times are fused into a combined map by way of distance based superposition. The multi-robot search behaviors are coordinated via a particle swarm optimization algorithm, where the estimated odor-source probability distribution is used to express the fitness functions. In the process of OSL, the estimation phase provides the prior knowledge for the searching while the searching verifies the estimation results, and both phases are implemented iteratively. The results of simulations for large-scale advection–diffusion plume environments and experiments using real robots in an indoor airflow environment validate the feasibility and robustness of the proposed OSL method

A review of source term estimation methods for atmospheric dispersion events using static or mobile sensors

Understanding atmospheric transport and dispersal events has an important role in a range of scenarios. Of particular importance is aiding in emergency response after an intentional or accidental chemical, biological or radiological (CBR) release. In the event of a CBR release, it is desirable to know the current and future spatial extent of the contaminant as well as its location in order to aid decision makers in emergency response. Many dispersion phenomena may be opaque or clear, thus monitoring them using visual methods will be difficult or impossible. In these scenarios, relevant concentration sensors are required to detect the substance where they can form a static network on the ground or be placed upon mobile platforms. This paper presents a review of techniques used to gain information about atmospheric dispersion events using static or mobile sensors. The review is concluded with a discussion on the current limitations of the state of the art and recommendations for future research

Underwater Vehicles

For the latest twenty to thirty years, a significant number of AUVs has been created for the solving of wide spectrum of scientific and applied tasks of ocean development and research. For the short time period the AUVs have shown the efficiency at performance of complex search and inspection works and opened a number of new important applications. Initially the information about AUVs had mainly review-advertising character but now more attention is paid to practical achievements, problems and systems technologies. AUVs are losing their prototype status and have become a fully operational, reliable and effective tool and modern multi-purpose AUVs represent the new class of underwater robotic objects with inherent tasks and practical applications, particular features of technology, systems structure and functional properties

On the use of autonomous unmanned vehicles in response to hazardous atmospheric release incidents

Recent events have induced a surge of interest in the methods of response to releases of hazardous materials or gases into the atmosphere. In the last decade there has been particular interest in mapping and quantifying emissions for regulatory purposes, emergency response, and environmental monitoring. Examples include: responding to events such as gas leaks, nuclear accidents or chemical, biological or radiological (CBR) accidents or attacks, and even exploring sources of methane emissions on the planet Mars. This thesis presents a review of the potential responses to hazardous releases, which includes source localisation, boundary tracking, mapping and source term estimation. [Continues.]</div

Biomimetic set up for chemosensor-based machine olfaction

The thesis falls into the field of machine olfaction and accompanying experimental set up for chemical gas sensing. Perhaps more than any other sensory modality, chemical sensing faces with major technical and conceptual challenges: low specificity, slow response time, long term instability, power consumption, portability, coding capacity and robustness. There is an important trend of the last decade pushing artificial olfaction to mimic the biological olfaction system of insects and mammalians. The designers of machine olfaction devices take inspiration from the biological olfactory system, because animals effortlessly accomplish some of the unsolved problems in machine olfaction. In a remarkable example of an olfactory guided behavior, male moths navigate over large distances in order to locate calling females by detecting pheromone signals both rapidly and robustly. The biomimetic chemical sensing aims to identify the key blocks in the olfactory pathways at all levels from the olfactory receptors to the central nervous system, and simulate to some extent the operation of these blocks, that would allow to approach the sensing performance known in biological olfactory system of animals. New technical requirements arise to the hardware and software equipment used in such machine olfaction experiments. This work explores the bioinspired approach to machine olfaction in depth on the technological side. At the hardware level, the embedded computer is assembled, being the core part of the experimental set up. The embedded computer is interfaced with two main biomimetic modules designed by the collaborators: a large-scale sensor array for emulation of the population of the olfactory receptors, and a mobile robotic platform for autonomous experiments for guiding olfactory behaviour. At the software level, the software development kit is designed to host the neuromorphic models of the collaborators for processing the sensory inputs as in the olfactory pathway. Virtualization of the set up was one of the key engineering solutions in the development. Being a device, the set up is transformed to a virtual system for running data simulations, where the software environment is essentially the same, and the real sensors are replaced by the virtual sensors coming from especially designed data simulation tool. The proposed abstraction of the set up results in an ecosystem containing both the models of the olfactory system and the virtual array. This ecosystem can loaded from the developed system image on any personal computer. In addition to the engineering products released in the course of thesis, the scientific results have been published in three journal articles, two book chapters and conference proceedings. The main results on validation of the set up under the scenario of robotic odour localization are reported in the book chapters. The series of three journal articles covers the work on the data simulation tool for machine olfaction: the novel model of drift, the models to simulate the sensor array data based on the reference data set, and the parametrized simulated data and benchmarks proposed for the first time in machine olfaction. This thesis ends up with a solid foundation for the research in biomimetic simulations and algorithms on machine olfaction. The results achieved in the thesis are expected to give rise to new bioinspired applications in machine olfaction, which could have a significant impact in the biomedical engineering research area.Esta tesis se enmarca en el campo de bioingeneria, mas particularmente en la configuración de un sistema experimental de sensores de gases químicos. Quizás más que en cualquier otra modalidad de sensores, los sensores químicos representan un conjunto de retos técnicos y conceptuales ya que deben lidiar con problemas como su baja especificidad, su respuesta temporal lenta, su inestabilidad a largo plazo, su alto consumo enérgético, su portabilidad, así como la necesidad de un sistema de datos y código robusto. En la última década, se ha observado una clara tendencia por parte de los sistemas de machine olfaction hacia la imitación del sistema de olfato biológico de insectos y mamíferos. Los diseñadores de estos sistemas se inspiran del sistema olfativo biológico, ya que los animales cumplen, sin apenas esfuerzo, algunos de los escenarios no resueltos en machine olfaction. Por ejemplo, las polillas machos recorren largas distancias para localizar las polillas hembra, detectando sus feromonas de forma rápida y robusta. La detección biomimética de gases químicos tiene como objetivo identificar los elementos fundamentales de la vía olfativa a todos los niveles, desde los receptores olfativos hasta el sistema nervioso central, y simular, en cierta medida, el funcionamiento de estos bloques, lo que permitiría acercar el rendimiento de la detección al rendimiento de los sistemas olfativos conociodos de los animales. Esto conlleva nuevos requisitos técnicos a nivel de equipamiento tanto hardware como software utilizado en este tipo de experimentos de machine olfaction. Este trabajo propone un enfoque bioinspirado para la ¿machine olfaction¿, explorando a fondo la parte tecnológica. A nivel hardware, un ordenador embedido se ha ensamblado, siendo ésta la parte más importante de la configuración experimental. Este ordenador integrado está interconectado con dos módulos principales biomiméticos diseñados por los colaboradores: una matriz de sensores a gran escala y una plataforma móvil robotizada para experimentos autónomos. A nivel software, el kit de desarrollo software se ha diseñado para recoger los modelos neuromórficos de los colaboradores para el procesamiento de las entradas sensoriales como en la vía olfativa biológica. La virtualización del sistema fue una de las soluciones ingenieriles clave de su desarrollo. Al ser un dispositivo, el sistema se ha transformado en un sistema virtual para la realización de simulaciones de datos, donde el entorno de software es esencialmente el mismo, y donde los sensores reales se sustituyen por sensores virtuales procedentes de una herramienta de simulación de datos especialmente diseñada. La propuesta de abstracción del sistema resulta en un ecosistema que contiene tanto los modelos del sistema olfativo como la matriz virtual . Este ecosistema se puede cargar en cualquier ordenador personal como una imagen del sistema desarrollado. Además de los productos de ingeniería entregados en esta tesis, los resultados científicos se han publicado en tres artículos en revistas, dos capítulos de libros y los proceedings de dos conferencias internacionales. Los principales resultados en la validación del sistema en el escenario de la localización robótica de olores se presentan en los capítulos del libro. Los tres artículos de revistas abarcan el trabajo en la herramienta de simulación de datos para machine olfaction: el novedoso modelo de drift, los modelos para simular la matriz de sensores basado en el conjunto de datos de referencia, y la parametrización de los datos simulados y los benchmarks propuestos por primera vez en machine olfaction. Esta tesis ofrece una base sólida para la investigación en simulaciones biomiméticas y en algoritmos en machine olfaction. Los resultados obtenidos en la tesis pretenden dar lugar a nuevas aplicaciones bioinspiradas en machine olfaction, lo que podría tener un significativo impacto en el área de investigación en ingeniería biomédic

Stochastic mapping for chemical plume source localization with application to autonomous hydrothermal vent discovery

Thesis (Ph. D.)--Joint Program in Oceanography/Applied Ocean Science and Engineering (Massachusetts Institute of Technology, Dept. of Mechanical Engineering; and the Woods Hole Oceanographic Institution), 2007.Includes bibliographical references (p. 313-325).This thesis presents a stochastic mapping framework for autonomous robotic chemical plume source localization in environments with multiple sources. Potential applications for robotic chemical plume source localization include pollution and environmental monitoring, chemical plant safety, search and rescue, anti-terrorism, narcotics control, explosive ordinance removal, and hydrothermal vent prospecting. Turbulent flows make the spatial relationship between the detectable manifestation of a chemical plume source, the plume itself, and the location of its source inherently uncertain. Search domains with multiple sources compound this uncertainty because the number of sources as well as their locations is unknown a priori. Our framework for stochastic mapping is an adaptation of occupancy grid mapping where the binary state of map nodes is redefined to denote either the presence (occupancy) or absence of an active plume source. A key characteristic of the chemical plume source localization problem is that only a few sources are expected in the search domain. The occupancy grid framework allows for both plume detections and non-detections to inform the estimated state of grid nodes in the map, thereby explicitly representing explored but empty portions of the domain as well as probable source locations.(cont.) However, sparsity in the expected number of occupied grid nodes strongly violates a critical conditional independence assumption required by the standard Bayesian recursive map update rule. While that assumption makes for a computationally attractive algorithm, in our application it results in occupancy grid maps that are grossly inconsistent with the assumption of a small number of occupied cells. To overcome this limitation, several alternative occupancy grid update algorithms are presented, including an exact solution that is computationally tractable for small numbers of detections and an approximate recursive algorithm with improved performance relative to the standard algorithm but equivalent computational cost. Application to hydrothermal plume data collected by the autonomous underwater vehicle ABE during vent prospecting operations in both the Pacific and Atlantic oceans verifies the utility of the approach. The resulting maps enable nested surveys for homing-in on seafloor vent sites to be carried out autonomously. This eliminates inter-dive processing, recharging of batteries, and time spent deploying and recovering the vehicle that would otherwise be necessary with survey design directed by human operators.by Michael V. Jakuba.Ph.D