On-Chip Transparent Wire Pipelining (invited paper)

Wire pipelining has been proposed as a viable mean to break the discrepancy between decreasing gate delays and increasing wire delays in deep-submicron technologies. Far from being a straightforwardly applicable technique, this methodology requires a number of design modifications in order to insert it seamlessly in the current design flow. In this paper we briefly survey the methods presented by other researchers in the field and then we thoroughly analyze the solutions we recently proposed, ranging from system-level wire pipelining to physical design aspects

Balancing Static Islands in Dynamically Scheduled Circuits using Continuous Petri Nets

High-level synthesis (HLS) tools automatically transform a high-level program, for example in C/C++, into a low-level hardware description. A key challenge in HLS is scheduling, i.e. determining the start time of all the operations in the untimed program. A major shortcoming of existing approaches to scheduling – whether they are static (start times determined at compile-time), dynamic (start times determined at run-time), or a hybrid of both – is that the static analysis cannot efficiently explore the run-time hardware behaviours. Existing approaches either assume the timing behaviour in extreme cases, which can cause sub-optimal performance or larger area, or use simulation-based approaches, which take a long time to explore enough program traces. In this article, we propose an efficient approach using probabilistic analysis for HLS tools to efficiently explore the timing behaviour of scheduled hardware. We capture the performance of the hardware using Timed Continous Petri nets with immediate transitions, allowing us to leverage efficient Petri net analysis tools for making HLS decisions. We demonstrate the utility of our approach by using it to automatically estimate the hardware throughput for balancing the throughput for statically scheduled components (also known as static islands) computing in a dynamically scheduled circuit. Over a set of benchmarks, we show that our approach on average incurs a 2% overhead in area-delay product compared to optimal designs by exhaustive search

Balancing static islands in dynamically scheduled circuits using continuous petri nets

High-level synthesis (HLS) tools automatically transform a high-level program, for example in C/C++, into a low-level hardware description. A key challenge in HLS is scheduling, i.e. determining the start time of all the operations in the untimed program. A major shortcoming of existing approaches to scheduling – whether they are static (start times determined at compile-time), dynamic (start times determined at run-time), or a hybrid of both – is that the static analysis cannot efficiently explore the run-time hardware behaviours. Existing approaches either assume the timing behaviour in extreme cases, which can cause sub-optimal performance or larger area, or use simulation-based approaches, which take a long time to explore enough program traces. In this article, we propose an efficient approach using probabilistic analysis for HLS tools to efficiently explore the timing behaviour of scheduled hardware. We capture the performance of the hardware using Timed Continous Petri nets with immediate transitions, allowing us to leverage efficient Petri net analysis tools for making HLS decisions. We demonstrate the utility of our approach by using it to automatically estimate the hardware throughput for balancing the throughput for statically scheduled components (also known as static islands) computing in a dynamically scheduled circuit. Over a set of benchmarks, we show that our approach on average incurs a 2% overhead in area-delay product compared to optimal designs by exhaustive search

LID: Retry Relay Station and Fusion Shell

This paper is electronically published in Electonic Notes In Theoretical Computer Science http://dx.doi.org/10.1016/j.entcs.2009.07.026This paper introduces a new variant implementation of Latency-Insensitive Design elements. It optimizes area footprint of so-called Shell-Wrappers being partially fused with their input Relay-Stations. The modified Relay-Station is called a Retry Relay-Station. We show correctness of this implementation and provide comparative results between a regular implementation and our new one on both FPGA and ASIC

Design and performance optimization of asynchronous networks-on-chip

As digital systems continue to grow in complexity, the design of conventional synchronous systems is facing unprecedented challenges. The number of transistors on individual chips is already in the multi-billion range, and a greatly increasing number of components are being integrated onto a single chip. As a consequence, modern digital designs are under strong time-to-market pressure, and there is a critical need for composable design approaches for large complex systems. In the past two decades, networks-on-chip (NoC’s) have been a highly active research area. In a NoC-based system, functional blocks are first designed individually and may run at different clock rates. These modules are then connected through a structured network for on-chip global communication. However, due to the rigidity of centrally-clocked NoC’s, there have been bottlenecks of system scalability, energy and performance, which cannot be easily solved with synchronous approaches. As a result, there has been significant recent interest in combing the notion of asynchrony with NoC designs. Since the NoC approach inherently separates the communication infrastructure, and its timing, from computational elements, it is a natural match for an asynchronous paradigm. Asynchronous NoC’s, therefore, enable a modular and extensible system composition for an ‘object-orient’ design style. The thesis aims to significantly advance the state-of-art and viability of asynchronous and globally-asynchronous locally-synchronous (GALS) networks-on-chip, to enable high-performance and low-energy systems. The proposed asynchronous NoC’s are nearly entirely based on standard cells, which eases their integration into industrial design flows. The contributions are instantiated in three different directions. First, practical acceleration techniques are proposed for optimizing the system latency, in order to break through the latency bottleneck in the memory interfaces of many on-chip parallel processors. Novel asynchronous network protocols are proposed, along with concrete NoC designs. A new concept, called ‘monitoring network’, is introduced. Monitoring networks are lightweight shadow networks used for fast-forwarding anticipated traffic information, ahead of the actual packet traffic. The routers are therefore allowed to initiate and perform arbitration and channel allocation in advance. The technique is successfully applied to two topologies which belong to two different categories – a variant mesh-of-trees (MoT) structure and a 2D-mesh topology. Considerable and stable latency improvements are observed across a wide range of traffic patterns, along with moderate throughput gains. Second, for the first time, a high-performance and low-power asynchronous NoC router is compared directly to a leading commercial synchronous counterpart in an advanced industrial technology. The asynchronous router design shows significant performance improvements, as well as area and power savings. The proposed asynchronous router integrates several advanced techniques, including a low-latency circular FIFO for buffer design, and a novel end-to-end credit-based virtual channel (VC) flow control. In addition, a semi-automated design flow is created, which uses portions of a standard synchronous tool flow. Finally, a high-performance multi-resource asynchronous arbiter design is developed. This small but important component can be directly used in existing asynchronous NoC’s for performance optimization. In addition, this standalone design promises use in opening up new NoC directions, as well as for general use in parallel systems. In the proposed arbiter design, the allocation of a resource to a client is divided into several steps. Multiple successive client-resource pairs can be selected rapidly in pipelined sequence, and the completion of the assignments can overlap in parallel. In sum, the thesis provides a set of advanced design solutions for performance optimization of asynchronous and GALS networks-on-chip. These solutions are at different levels, from network protocols, down to router- and component-level optimizations, which can be directly applied to existing basic asynchronous NoC designs to provide a leap in performance improvement

The Wiring Economy Principle: Connectivity Determines Anatomy in the Human Brain

Minimization of the wiring cost of white matter fibers in the human brain appears to be an organizational principle. We investigate this aspect in the human brain using whole brain connectivity networks extracted from high resolution diffusion MRI data of 14 normal volunteers. We specifically address the question of whether brain anatomy determines its connectivity or vice versa. Unlike previous studies we use weighted networks, where connections between cortical nodes are real-valued rather than binary off-on connections. In one set of analyses we found that the connectivity structure of the brain has near optimal wiring cost compared to random networks with the same number of edges, degree distribution and edge weight distribution. A specifically designed minimization routine could not find cheaper wiring without significantly degrading network performance. In another set of analyses we kept the observed brain network topology and connectivity but allowed nodes to freely move on a 3D manifold topologically identical to the brain. An efficient minimization routine was written to find the lowest wiring cost configuration. We found that beginning from any random configuration, the nodes invariably arrange themselves in a configuration with a striking resemblance to the brain. This confirms the widely held but poorly tested claim that wiring economy is a driving principle of the brain. Intriguingly, our results also suggest that the brain mainly optimizes for the most desirable network connectivity, and the observed brain anatomy is merely a result of this optimization

Automatic generation of hardware/software interfaces

Enabling new applications for mobile devices often requires the use of specialized hardware to reduce power consumption. Because of time-to-market pressure, current design methodologies for embedded applications require an early partitioning of the design, allowing the hardware and software to be developed simultaneously, each adhering to a rigid interface contract. This approach is problematic for two reasons: (1) a detailed hardware-software interface is difficult to specify until one is deep into the design process, and (2) it prevents the later migration of functionality across the interface motivated by efficiency concerns or the addition of features. We address this problem using the Bluespec Codesign Language~(BCL) which permits the designer to specify the hardware-software partition in the source code, allowing the compiler to synthesize efficient software and hardware along with transactors for communication between the partitions. The movement of functionality across the hardware-software boundary is accomplished by simply specifying a new partitioning, and since the compiler automatically generates the desired interface specifications, it eliminates yet another error-prone design task. In this paper we present BCL, an extension of a commercially available hardware design language (Bluespec SystemVerilog), a new software compiling scheme, and preliminary results generated using our compiler for various hardware-software decompositions of an Ogg Vorbis audio decoder, and a ray-tracing application.National Science Foundation (U.S.) (NSF (#CCF-0541164))National Research Foundation of Korea (grant from the Korean Government (MEST) (#R33-10095)

The Detector System of the KATRIN Experiment - Implementation and First Measurements with the Spectrometer

This thesis describes work performed in the context of the Karlsruhe Tritium Neutrino (KATRIN) experiment which is targeted to determine the absolute neutrino-mass scale with an unrivaled sensitivity of 200 meV (90% C.L.). With respect to the challenges faced by the KATRIN spectrometer and detector section, the main objectives of this thesis are to install, to commission and to characterize the detector system as well as to examine spectrometer-related and detector-based backgrounds