Optimization of deterministic timed weighted marked graphs

Timed marked graphs, a special class of Petri nets, are extensively used to model and analyze cyclic manufacturing systems. Weighted marked graphs are convenient to model systems with bulk services and arrivals. We consider two problems of practical importance for this class of nets. The marking optimization problem consists in finding an initial marking to minimize the weighted sum of tokens in places, while the average cycle time is less than or equal to a given value. The cycle time optimization problem consists in finding an initial marking to minimize the average cycle time, while the weighted sum of tokens in places is less than or equal to a given value. We propose two heuristic algorithms to solve these problems. Several simulation studies show that the proposed approach is significantly more efficient than existing ones

Elasticity and Petri nets

Digital electronic systems typically use synchronous clocks and primarily assume fixed duration of their operations to simplify the design process. Time elastic systems can be constructed either by replacing the clock with communication handshakes (asynchronous version) or by augmenting the clock with a synchronous version of a handshake (synchronous version). Time elastic systems can tolerate static and dynamic changes in delays (asynchronous case) or latencies (synchronous case) of operations that can be used for modularity, ease of reuse and better power-delay trade-off. This paper describes methods for the modeling, performance analysis and optimization of elastic systems using Marked Graphs and their extensions capable of describing behavior with early evaluation. The paper uses synchronous elastic systems (aka latency-tolerant systems) for illustrating the use of Petri nets, however, most of the methods can be applied without changes (except changing the delay model associated with events of the system) to asynchronous elastic systems.Peer ReviewedPostprint (author's final draft

Discrete events: Perspectives from system theory

Systems Theory;differentiaal/ integraal-vergelijkingen

Modular Learning and Optimization for Planning of Discrete Event Systems

Optimization of industrial processes, such as manufacturing cells, can have great impact on their performance. Finding optimal solutions to these large-scale systems is, however, a complex problem. They typically include multiple subsystems, and the search space generally grows exponentially with each subsystem. This is usually referred to as the state explosion problem and is a well-known problem within the control and optimization of automation systems. This thesis proposes two main contributions to improve and to simplify the optimization of these systems. The first is a new method of solving these optimization problems using a compositional optimization approach. This integrates optimization with techniques from compositional supervisory control using modular formal models, dividing the optimization of subsystems into separate subproblems. The second is a modular learning approach that alleviates the need for prior knowledge of the systems and system experts when applying compositional optimization. The key to both techniques is the division of the large system into smaller subsystems and the identification of local behavior in these subsystems, i.e. behavior that is independent of all other subsystems. It is proven in this thesis that this local behavior can be partially optimized individually without affecting the global optimal solution. This is used to reduce the state space in each subsystem, and to construct the global optimal solution compositionally.The thesis also shows that the proposed techniques can be integrated to compute global optimal solutions to large-scale optimization problems, too big to solve based on traditional monolithic models

Scheduling and discrete event control of flexible manufacturing systems based on Petri nets

A flexible manufacturing system (FMS) is a computerized production system that can simultaneously manufacture multiple types of products using various resources such as robots and multi-purpose machines. The central problems associated with design of flexible manufacturing systems are related to process planning, scheduling, coordination control, and monitoring. Many methods exist for scheduling and control of flexible manufacturing systems, although very few methods have addressed the complexity of whole FMS operations. This thesis presents a Petri net based method for deadlock-free scheduling and discrete event control of flexible manufacturing systems. A significant advantage of Petri net based methods is their powerful modeling capability. Petri nets can explicitly and concisely model the concurrent and asynchronous activities, multi-layer resource sharing, routing flexibility, limited buffers and precedence constraints in FMSs. Petri nets can also provide an explicit way for considering deadlock situations in FMSs, and thus facilitate significantly the design of a deadlock-free scheduling and control system. The contributions of this work are multifold. First, it develops a methodology for discrete event controller synthesis for flexible manufacturing systems in a timed Petri net framework. The resulting Petri nets have the desired qualitative properties of liveness, boundedness (safeness), and reversibility, which imply freedom from deadlock, no capacity overflow, and cyclic behavior, respectively. This precludes the costly mathematical analysis for these properties and reduces on-line computation overhead to avoid deadlocks. The performance and sensitivity of resulting Petri nets, thus corresponding control systems, are evaluated. Second, it introduces a hybrid heuristic search algorithm based on Petri nets for deadlock-free scheduling of flexible manufacturing systems. The issues such as deadlock, routing flexibility, multiple lot size, limited buffer size and material handling (loading/unloading) are explored. Third, it proposes a way to employ fuzzy dispatching rules in a Petri net framework for multi-criterion scheduling. Finally, it shows the effectiveness of the developed methods through several manufacturing system examples compared with benchmark dispatching rules, integer programming and Lagrangian relaxation approaches

Performance Bounds for Synchronized Queueing Networks

Las redes de Petri estocásticas constituyen un modelo unificado de las diferentes extensiones de redes de colas con sincronizaciones existentes en la literatura, válido para el diseño y análisis de prestaciones de sistemas informáticos distribuidos. En este trabajo se proponen técnicas de cálculo de cotas superiores e inferiores de las prestaciones de redes de Petri estocásticas en estado estacionario. Las cotas obtenidas son calculables en tiempo polinómico en el tamaño del modelo, por medio de la resolución de ciertos problemas de programación lineal definidos a partir de la matriz de incidencia de la red (en este sentido, las técnicas desarrolladas pueden considerarse estructurales). Las cotas calculadas dependen sólamente de los valores medios de las variables aleatorias que describen la temporización del sistema, y son independientes de los momentos de mayor orden. Esta independencia de la forma de las distribuciones de probabilidad asociadas puede considerarse como una útil generalización de otros resultados existentes para distribuciones particulares, puesto que los momentos de orden superior son, habitualmente, desconocidos en la realidad y difíciles de estimar. Finalmente, las técnicas desarrolladas se aplican al análisis de diferentes ejemplos tomados de la literatura sobre sistemas informáticos distribuidos y sistemas de fabricación. ******* Product form queueing networks have long been used for the performance evaluation of computer systems. Their success has been due to their capability of naturally expressing sharing of resources and queueing, that are typical situations of traditional computer systems, as well as to their efficient solution algorithms, of polynomial complexity on the size of the model. Unfortunately, the introduction of synchronization constraints usually destroys the product form solution, so that general concurrent and distributed systems are not easily studied with this class of models. Petri nets have been proved specially adequate to model parallel and distributed systems. Moreover, they have a well-founded theory of analysis that allows to investigate a great number of qualitative properties of the system. In the original definition, Petri nets did not include the notion of time, and tried to model only the logical behaviour of systems by describing the causal relations existing among events. This approach showed its power in the specification and analysis of concurrent systems in a way independent of the concept of time. Nevertheless the introduction of a timing specification is essential if we want to use this class of models for the performance evaluation of distributed systems. One of the main problems in the actual use of timed and stochastic Petri net models for the quantitative evaluation of large systems is the explosion of the computational complexity of the analysis algorithms. In general, exact performance results are obtained from the numerical solution of a continuous time Markov chain, whose dimension is given by the size of the state space of the model. Structural computation of exact performance measures has been possible for some subclasses of nets such as those with state machine topology. These nets, under certain assumptions on the stochastic interpretation are isomorphic to Gordon and Newell's networks, in queueing theory terminology. In the general case, efficient methods for the derivation of performance measures are still needed. Two complementary approaches to the derivation of exact measures for the analysis of distributed systems are the utilization of approximation techniques and the computation of bounds. Approximate values for the performance parameters are in general more efficiently derived than the exact ones. On the other hand, "exactness" only exists in theory! In other words, numerical algorithms must be applied in practice for the computation of exact values, therefore making errors is inevitable. Performance bounds are useful in the preliminary phases of the design of a system, in which many parameters are not known accurately. Several alternatives for those parameters should be quickly evaluated, and rejected those that are clearly bad. Exact (and even approximate) solutions would be computationally very expensive. Bounds become useful in these instances since they usually require much less computation effort. The computation of upper and lower bounds for the steady-state performance of timed and stochastic Petri nets is considered in this work. In particular, we study the throughput of transitions, defined as the average number of firings per time unit. For this measure we try to compute upper and lower bounds in polynomial time on the size of the net model, by means of proper linear programming problems defined from the incidence matrix of the net (in this sense, we develop structural techniques). These bounds depend only on the mean values and not on the higher moments of the probability distribution functions of the random variables that describe the timing of the system. The independence of the probability distributions can be viewed as a useful generalization of the performance results, since higher moments of the delays are usually unknown for real cases, and difficult to estimate and assess. From a different perspective, the obtained results can be applied to the analysis of queueing networks extended with some synchronization schemes. Monoclass queueing networks can be mapped on stochastic Petri nets. On the other hand, stochastic Petri nets can be interpreted as monoclass queueing networks augmented with synchronization primitives. Concerning the presentation of this manuscript, it should be mentioned that chapter 1 has been written with the object of giving the reader an outline of the stochastic Petri net model: its definition, terminology, basic properties, and related concepts, together with its deep relation with other classic stochastic network models. Chapter 2 is devoted to the presentation of the net subclasses considered in the rest of the work. The classification presented here is quite different from the one which is usual in the framework of Petri nets. The reason lies on the fact that our classification criterion, the computability of visit ratios for transitions, is introduced for the first time in the field of stochastic Petri nets in this work. The significance of that criterion is based on the important role that the visit ratios play in the computation of upper and lower bounds for the performance of the models. Nevertheless, classical important net subclasses are identified here in terms of the computability of their visit ratios from different parameters of the model. Chapter 3 is concerned with the computation of reachable upper and lower bounds for the most restrictive subclass of those presented in chapter 2: marked graphs. The explanation of this fact is easy to understand. The more simple is the model the more accessible will be the techniques an ideas for the development of good results. Chapter 4 provides a generalization for live and bounded free choice nets of the results presented in the previous chapter. Quality of obtained bounds is similar to that for strongly connected marked graphs: throughput lower bounds are reachable for bounded nets while upper bounds are reachable for 1-bounded nets. Chapter 5 considers the extension to other net subclasses, like mono-T-semiflow nets, FRT-nets, totally open deterministic systems of sequential processes, and persistent nets. The results are of diverse colours. For mono-T-semiflow nets and, therefore, for general FRT-nets, it is not possible (so far) to obtain reachable throughput bounds. On the other hand, for bounded ordinary persistent nets, tight throughput upper bounds are derived. Moreover, in the case of totally open deterministic systems of sequential processes the exact steady-state performance measures can be computed in polynomial time on the net size. In chapter 6 bounds for other interesting performance measures are derived from throughput bounds and from classical queueing theory laws. After that, we explore the introduction of more information from the probability distribution functions of service times in order to improve the bounds. In particular, for Coxian service delay of transitions it is possible to improve the throughput upper bounds of previous chapters which held for more general forms of distribution functions. This improvement shows to be specially fruitful for live and bounded free choice nets. Chapter 7 is devoted to case studies. Several examples taken from literature in the fields of distributed computing systems and manufacturing systems are modelled by means of stochastic Petri nets and evaluated using the techniques developed in previous chapters. Finally, some concluding remarks and considerations on possible extensions of the work are presented

Time-optimal control of large-scale systems of systems using compositional optimization

Optimization of industrial processes such as manufacturing cells can have great impact on their performance. Finding optimal solutions to these large-scale systems is, however, a complex problem. They typically include multiple subsystems, and the search space generally grows exponentially with each subsystem. In previous work we proposed Compositional Optimization as a method to solve these type of problems. This integrates optimization with techniques from compositional supervisory control, dividing the optimization into separate sub-problems. The main purpose is to mitigate the state explosion problem, but a bonus is that the individual sub-problems can be solved using parallel computation, making the method even more scalable. This paper further improves on compositional optimization with a novel synchronization method, called partial time-weighted synchronization (PTWS), that is specifically designed for time-optimal control of asynchronous systems. The benefit is its ability to combine the behaviour of asynchronous subsystems without introducing additional states or transitions. The method also reduces the search space further by integrating an optimization heuristic that removes many non-optimal or redundant solutions already during synchronization. Results in this paper show that compositional optimization efficiently generates global optimal solutions to large-scale realistic optimization problems, too big to solve when based on traditional monolithic models. It is also shown that the introduction of PTWS drastically decreases the total search space of the optimization compared to previous work