68 research outputs found

    Modelling, Monitoring and Validation of Plant Phenology Products

    Get PDF
    PhĂ€nologie, die Lehre der periodisch wiederkehrenden Entwicklungserscheinungen in der Natur, hat sich in den letzten Jahrzehnten zu einem wichtigen Teilgebiet der Klimaforschung entwickelt. Einer der Haupteffekte der globalen ErwĂ€rmung ist die VerĂ€nderung der Wachstumsmuster und Fortpflanzungsgewohnheiten von Pflanzen, und somit verĂ€nderte PhĂ€nologie. Um die Auswirkungen der KlimaverĂ€nderung auf wildwachsende sowie Kulturpflanzen vorherzusagen, werden phĂ€nologische Modelle angewendet, verbessert und validiert. Dabei ist Wissen ĂŒber den aktuellen Stand der Vegetation notwendig, welches aus Beobachtungen und fernerkundliche Messungen gewonnen wird. Die hier prĂ€sentierte Arbeit befasst sich mit dem VerstĂ€ndnis der ZusammenhĂ€nge zwischen fernerkundlichen Messungen und phĂ€nologischen Stadien und somit den Herausforderungen der modernen phĂ€nologischen Forschung: Der Vorhersage der PhĂ€nologie durch ModellierungsansĂ€tze, der Beobachtung der PhĂ€nologie mit optischen boden- und satellitengestĂŒtzten Sensoren und der Validierung phĂ€nologischer Produkte.Phenology, the study of recurring life cycle events of plants and animals has emerged as an important part of climate change research within the last decades. One of the main effects of global warming on vegetation is altered phenology, since plants have to modify their growth patterns and reproduction habits as reaction to changing environmental conditions. Forecasting phenology, thus phenological modelling, is a timely challenge given the necessity to predict the impact of global warming on wild-growing species and agricultural crops. However, assessing the present state of vegetation, thus phenological monitoring, is essential to update and validate model results. An improved comprehension of the relationships between plant phenology and remotely sensed products is crucial to interpret these results. Consequently, the presented thesis deals with the main challenges faced in modern phenology research, covering phenological forecasting with a modelling approach, satellite-based phenology extraction, and near-surface long-term monitoring of phenology

    A Review of Vegetation Phenological Metrics Extraction Using Time-Series, Multispectral Satellite Data

    Get PDF
    Vegetation dynamics and phenology play an important role in inter-annual vegetation changes in terrestrial ecosystems and are key indicators of climate-vegetation interactions, land use/land cover changes, and variation in year-to-year vegetation productivity. Satellite remote sensing data have been widely used for vegetation phenology monitoring over large geographic domains using various types of observations and methods over the past several decades. The goal of this paper is to present a detailed review of existing methods for phenology detection and emerging new techniques based on the analysis of time-series, multispectral remote sensing imagery. This paper summarizes the objective and applications of detecting general vegetation phenology stages (e.g., green onset, time or peak greenness, and growing season length) often termed “land surface phenology,” as well as more advanced methods that estimate species-specific phenological stages (e.g., silking stage of maize). Common data-processing methods, such as data smoothing, applied to prepare the time-series remote sensing observations to be applied to phenological detection methods are presented. Specific land surface phenology detection methods as well as species-specific phenology detection methods based on multispectral satellite data are then discussed. The impact of different error sources in the data on remote-sensing based phenology detection are also discussed in detail, as well as ways to reduce these uncertainties and errors. Joint analysis of multiscale observations ranging from satellite to more recent ground-based sensors is helpful for us to understand satellite-based phenology detection mechanism and extent phenology detection to regional scale in the future. Finally, emerging opportunities to further advance remote sensing of phenology is presented that includes observations from Cubesats, near-surface observations such as PhenoCams, and image data fusion techniques to improve the spatial resolution of time-series image data sets needed for phenological characterization

    Assessing the optimal preprocessing steps of MODIS time series to map cropping systems in Mato Grosso, Brazil

    Get PDF
    The adoption of new cropping practices such as integrated Crop-Livestock systems (iCL) aims at improving the land use sustainability of the agricultural sector in the Brazilian Amazon. The emergence of such integrated systems, based on crop and pasture rotations over and within years, challenges the remote sensing community who needs to implement accurate and efficient methods to process satellite image time series (SITS) in order to come up with a monitoring protocol. These methods generally include a SITS preprocessing step which can be time consuming. The aim of this study is to assess the importance of preprocessing operations such as temporal smoothing and computation of phenological metrics on the mapping of main cropping systems (i.e. pasture, single cropping, double cropping and iCL), with a special emphasis on the iCL class. The study area is located in the state of Mato Grosso, an important producer of agriculture commodities located in the Southern Brazilian Amazon. SITS were composed of a set of 16-day composites of MODIS Vegetation Indices (MOD13Q1 product) covering a one year period between 2014 and 2015. Two widely used classifiers, i.e. Random Forest (RF) and Support Vector Machine (SVM), were tested using five data sets issued from a same SITS but with different preprocessing levels: (i) raw NDVI; (ii) raw NDVI + raw EVI; (iii) smoothed NDVI; (iv) NDVI-derived phenometrics; (v) raw NDVI + phenometrics. Both RF and SVM classification results showed that the “raw NDVI + raw EVI” data set achieved the highest performance (RF OA = 0.96, RF Kappa = 0.94, SVM OA = 0.95, SVM Kappa = 0.93), followed closely by the “raw NDVI” and the “raw NDVI + phenometrics” datasets. The “NDVI-derived phenometrics” alone achieved the lowest accuracies (RF OA = 0.58 and SVM OA = 0.66). Considering that the implementation of preprocessing steps is computationally expensive and does not provide significant gains in terms of classification accuracy, we recommend to use raw vegetation indices for mapping cropping practices in Mato Grosso, including the integrated Crop-Livestock systems

    A Novel Strategy to Reconstruct NDVI Time-Series with High Temporal Resolution from MODIS Multi-Temporal Composite Products

    Get PDF
    Vegetation indices (VIs) data derived from satellite imageries play a vital role in land surface vegetation and dynamic monitoring. Due to the excessive noises (e.g., cloud cover, atmospheric contamination) in daily VI data, temporal compositing methods are commonly used to produce composite data to minimize the negative influence of noise over a given compositing time interval. However, VI time series with high temporal resolution were preferred by many applications such as vegetation phenology and land change detections. This study presents a novel strategy named DAVIR-MUTCOP (DAily Vegetation Index Reconstruction based on MUlti-Temporal COmposite Products) method for normalized difference vegetation index (NDVI) time-series reconstruction with high temporal resolution. The core of the DAVIR-MUTCOP method is a combination of the advantages of both original daily and temporally composite products, and selecting more daily observations with high quality through the temporal variation of temporally corrected composite data. The DAVIR-MUTCOP method was applied to reconstruct high-quality NDVI time-series using MODIS multi-temporal products in two study areas in the continental United States (CONUS), i.e., three field experimental sites near Mead, Nebraska from 2001 to 2012 and forty-six AmeriFlux sites evenly distributed across CONUS from 2006 to 2010. In these two study areas, the DAVIR-MUTCOP method was also compared to several commonly used methods, i.e., the Harmonic Analysis of Time- Series (HANTS) method using original daily observations, Savitzky–Golay (SG) filtering using daily observations with cloud mask products as auxiliary data, and SG filtering using temporally corrected composite data. The results showed that the DAVIR-MUTCOP method significantly improved the temporal resolution of the reconstructed NDVI time series. It performed the best in reconstructing NDVI time-series across time and space (coefficient of determination (R2 = 0.93 ~ 0.94) between reconstructed NDVI and ground-observed LAI). DAVIR-MUTCOP method presented the highest robustness and accuracy with the change of the filtering parameter (R2 = 0.99 ~ 1.00, bias = 0.001, root mean square error (RMSE) = 0.020). Only MODIS data were used in this study; nevertheless, the DAVIR-MUTCOP method proposed a universal and potential way to reconstruct daily time series of other VIs or from other operational sensors, e.g., AVHRR and VIIRS

    Assessing spring phenology of a temperate woodland : a multiscale comparison of ground, unmanned aerial vehicle and Landsat satellite observations

    Get PDF
    PhD ThesisVegetation phenology is the study of plant natural life cycle stages. Plant phenological events are related to carbon, energy and water cycles within terrestrial ecosystems, operating from local to global scales. As plant phenology events are highly sensitive to climate fluctuations, the timing of these events has been used as an independent indicator of climate change. The monitoring of forest phenology in a cost-effective manner, at a fine spatial scale and over relatively large areas remains a significant challenge. To address this issue, unmanned aerial vehicles (UAVs) appear to be a potential new platform for forest phenology monitoring. The aim of this research is to assess the potential of UAV data to track the temporal dynamics of spring phenology, from the individual tree to woodland scale, and to cross-compare UAV results against ground and satellite observations, in order to better understand characteristics of UAV data and assess potential for use in validation of satellite-derived phenology. A time series of UAV data were acquired in tandem with an intensive ground campaign during the spring season of 2015, over Hanging Leaves Wood, Northumberland, UK. The radiometric quality of the UAV imagery acquired by two consumer-grade cameras was assessed, in terms of the ability to retrieve reflectance and Normalised Difference Vegetation Index (NDVI), and successfully validated against ground (0.84≀R2≄0.96) and Landsat (0.73≀R2≄0.89) measurements, but only NDVI resulted in stable time series. The start (SOS), middle (MOS) and end (EOS) of spring season dates were estimated at an individual tree-level using UAV time series of NDVI and Green Chromatic Coordinate (GCC), with GCC resulting in a clearer and stronger seasonal signal at a tree crown scale. UAV-derived SOS could be predicted more accurately than MOS and EOS, with an accuracy of less than 1 week for deciduous woodland and within 2 weeks for evergreen. The UAV data were used to map phenological events for individual trees across the whole woodland, demonstrating that contrasting canopy phenological events can occur within the extent of a single Landsat pixel. This accounted for the poor relationships found between UAV- and Landsat-derived phenometrics (R2<0.45) in this study. An opportunity is now available to track very fine scale land surface changes over contiguous vegetation communities, information which could improve characterization of vegetation phenology at multiple scales.The Science without Borders program, managed by CAPES-Brazil (Coordenação de Aperfeiçoamento de Pessoal de NĂ­vel Superior)

    Remote Sensing of Biophysical Parameters

    Get PDF
    Vegetation plays an essential role in the study of the environment through plant respiration and photosynthesis. Therefore, the assessment of the current vegetation status is critical to modeling terrestrial ecosystems and energy cycles. Canopy structure (LAI, fCover, plant height, biomass, leaf angle distribution) and biochemical parameters (leaf pigmentation and water content) have been employed to assess vegetation status and its dynamics at scales ranging from kilometric to decametric spatial resolutions thanks to methods based on remote sensing (RS) data.Optical RS retrieval methods are based on the radiative transfer processes of sunlight in vegetation, determining the amount of radiation that is measured by passive sensors in the visible and infrared channels. The increased availability of active RS (radar and LiDAR) data has fostered their use in many applications for the analysis of land surface properties and processes, thanks to their insensitivity to weather conditions and the ability to exploit rich structural and texture information. Optical and radar data fusion and multi-sensor integration approaches are pressing topics, which could fully exploit the information conveyed by both the optical and microwave parts of the electromagnetic spectrum.This Special Issue reprint reviews the state of the art in biophysical parameters retrieval and its usage in a wide variety of applications (e.g., ecology, carbon cycle, agriculture, forestry and food security)

    Monitoring the vegetation start of season (SOS) across the island of Ireland using the MERIS global vegetation index

    Get PDF
    The aim of this study was to develop a methodology, based on satellite remote sensing, to estimate the vegetation Start of Season (SOS) across the whole island of Ireland on an annual basis. This growing body of research is known as Land Surface Phenology (LSP) monitoring. The SOS was estimated for each year from a 7-year time series of 10-day composited, 1.2 km reduced resolution MERIS Global Vegetation Index (MGVI) data from 2003 to 2009, using the time series analysis software, TIMESAT. The selection of a 10-day composite period was guided by in-situ observations of leaf unfolding and cloud cover at representative point locations on the island. The MGVI time series was smoothed and the SOS metric extracted at a point corresponding to 20% of the seasonal MGVI amplitude. The SOS metric was extracted on a per pixel basis and gridded for national scale coverage. There were consistent spatial patterns in the SOS grids which were replicated on an annual basis and were qualitatively linked to variation in landcover. Analysis revealed that three statistically separable groups of CORINE Land Cover (CLC) classes could be derived from differences in the SOS, namely agricultural and forest land cover types, peat bogs, and natural and semi-natural vegetation types. These groups demonstrated that managed vegetation, e.g. pastures has a significantly earlier SOS than in unmanaged vegetation e.g. natural grasslands. There was also interannual spatio-temporal variability in the SOS. Such variability was highlighted in a series of anomaly grids showing variation from the 7-year mean SOS. An initial climate analysis indicated that an anomalously cold winter and spring in 2005/2006, linked to a negative North Atlantic Oscillation index value, delayed the 2006 SOS countrywide, while in other years the SOS anomalies showed more complex variation. A correlation study using air temperature as a climate variable revealed the spatial complexity of the air temperature-SOS relationship across the Republic of Ireland as the timing of maximum correlation varied from November to April depending on location. The SOS was found to occur earlier due to warmer winters in the Southeast while it was later with warmer winters in the Northwest. The inverse pattern emerged in the spatial patterns of the spring correlates. This contrasting pattern would appear to be linked to vegetation management as arable cropping is typically practiced in the southeast while there is mixed agriculture and mostly pastures to the west. Therefore, land use as well as air temperature appears to be an important determinant of national scale patterns in the SOS. The TIMESAT tool formed a crucial component of the estimation of SOS across the country in all seven years as it minimised the negative impact of noise and data dropouts in the MGVI time series by applying a smoothing algorithm. The extracted SOS metric was sensitive to temporal and spatial variation in land surface vegetation seasonality while the spatial patterns in the gridded SOS estimates aligned with those in landcover type. The methodology can be extended for a longer time series of FAPAR as MERIS will be replaced by the ESA Sentinel mission in 2013, while the availability of full resolution (300m) MERIS FAPAR and equivalent sensor products holds the possibility of monitoring finer scale seasonality variation. This study has shown the utility of the SOS metric as an indicator of spatiotemporal variability in vegetation phenology, as well as a correlate of other environmental variables such as air temperature. However, the satellite-based method is not seen as a replacement of ground-based observations, but rather as a complementary approach to studying vegetation phenology at the national scale. In future, the method can be extended to extract other metrics of the seasonal cycle in order to gain a more comprehensive view of seasonal vegetation development

    Possibilities of forecasting the yield of organic wheat using aerospace methods

    Get PDF
    With climate change, adverse natural phenomena, such as floods and droughts, are becoming more common, which in turn are a major threat to wheat yields. Almost all regions of the planet are vulnerable to such climatic events. Remote sensing methods can help farmers by giving them up-to-date information on the condition and yield forecasting of wheat crops, thus minimizing the risk of climate change

    Applications of satellite ‘hyper-sensing’ in Chinese agriculture:Challenges and opportunities

    Get PDF
    Ensuring adequate food supplies to a large and increasing population continues to be the key challenge for China. Given the increasing integration of China within global markets for agricultural products, this issue is of considerable significance for global food security. Over the last 50 years, China has increased the production of its staple crops mainly by increasing yield per unit land area. However, this has largely been achieved through inappropriate agricultural practices, which have caused environmental degradation, with deleterious consequences for future agricultural productivity. Hence, there is now a pressing need to intensify agriculture in China using practices that are environmentally and economically sustainable. Given the dynamic nature of crops over space and time, the use of remote sensing technology has proven to be a valuable asset providing end-users in many countries with information to guide sustainable agricultural practices. Recently, the field has experienced considerable technological advancements reflected in the availability of ‘hyper-sensing’ (high spectral, spatial and temporal) satellite imagery useful for monitoring, modelling and mapping of agricultural crops. However, there still remains a significant challenge in fully exploiting such technologies for addressing agricultural problems in China. This review paper evaluates the potential contributions of satellite ‘hyper-sensing’ to agriculture in China and identifies the opportunities and challenges for future work. We perform a critical evaluation of current capabilities in satellite ‘hyper-sensing’ in agriculture with an emphasis on Chinese sensors. Our analysis draws on a series of in-depth examples based on recent and on-going projects in China that are developing ‘hyper-sensing’ approaches for (i) measuring crop phenology parameters and predicting yields; (ii) specifying crop fertiliser requirements; (iii) optimising management responses to abiotic and biotic stress in crops; (iv) maximising yields while minimising water use in arid regions; (v) large-scale crop/cropland mapping; and (vi) management zone delineation. The paper concludes with a synthesis of these application areas in order to define the requirements for future research, technological innovation and knowledge exchange in order to deliver yield sustainability in China
    • 

    corecore