Modular Remote Reprogramming of Sensor Nodes

Wireless sensor networks are envisioned to be deployed in the absence of permanent network infrastructure and in environments with limited or no human accessibility. Hence, such deployments demand mechanisms to remotely (i.e., over the air) reconfigure and update the software on the nodes. In this paper we introduce DyTOS, a TinyOS based remote reprogramming approach that enables the dynamic exchange of software components and thus incrementally update the operating system and its applications. The core idea is to preserve the modularity of TinyOS, i.e., its componentisation, which is lost during the normal compilation process, and enable runtime composition of TinyOS components on the sensor node. The proposed solution integrates seamlessly into the system architecture of TinyOS: It does not require any changes to the programming model of TinyOS and all existing components can be reused transparently. Our evaluation shows that DyTOS incurs a low performance overhead while keeping a smaller – up to one third – memory footprint than other comparable solutions

Data management of on-line partial discharge monitoring using wireless sensor nodes integrated with a multi-agent system

On-line partial discharge monitoring has been the subject of significant research in previous years but little work has been carried out with regard to the management of on-site data. To date, on-line partial discharge monitoring within a substation has only been concerned with single plant items, so the data management problem has been minimal. As the age of plant equipment increases, so does the need for condition monitoring to ensure maximum lifespan. This paper presents an approach to the management of partial discharge data through the use of embedded monitoring techniques running on wireless sensor nodes. This method is illustrated by a case study on partial discharge monitoring data from an ageing HVDC reactor

Arbitrary Packet Matching in OpenFlow

OpenFlow has emerged as the de facto control protocol to implement Software-Defined Networking (SDN). In its current form, the protocol specifies a set of fields on which it matches packets to perform actions, such as forwarding, discarding or modifying specific protocol header fields at a switch. The number of match fields has increased with every version of the protocol to extend matching capabilities, however, it is still not flexible enough to match on arbitrary packet fields which limits innovation and new protocol development with OpenFlow. In this paper, we argue that a fully flexible match structure is superior to continuously extending the number of fields to match upon. We use Berkeley Packet Filters (BPF) for packet classification to provide a protocol-independent, flexible alternative to today’s OpenFlow fixed match fields. We have implemented a prototype system and evaluated the performance of the proposed match scheme, with a focus on the time it takes to execute and the memory required to store different match filter specifications. Our prototype implementation demonstrates that line-rate arbitrary packet classification can be achieved with complex BPF programs

Towards a scalable routing approach for mobile ad-hoc networks

The Internet is evolving towards a two-fold architecture that will comprise of traditional infrastructure based networks as well as emerging self organised autonomic peripheral networks. Such Internet peripheral networks are being termed as the Internet of things (IoT) whereby smart objects and devices will be connected together in a fully distributed fashion to provide ubiquitous services through pervasive networking. Mobile Ad hoc Networks (MANETs) is regarded as one of the pervasive self-organised networks that will play a major role in autonomic future internet communication. There are several well- known challenges to be addressed in order to enable MANET deployments of large islands of interconnected smart devices. Therefore, in this paper, we present a mathematical model based analysis of various well-known routing protocols for MANETs in order to determine the scalability of these protocols. This paper analyses the scalability of the routing protocols with respect to routing overhead required by approaches while also considering the packet delivery latency, which is an important Quality of Service (QoS) metric

Pervasive service discovery in low-power and lossy networks

Pervasive Service Discovery (SD) in Low-power and Lossy Networks (LLNs) is expected to play a major role in realising the Internet of Things (IoT) vision. Such a vision aims to expand the current Internet to interconnect billions of miniature smart objects that sense and act on our surroundings in a way that will revolutionise the future. The pervasiveness and heterogeneity of such low-power devices requires robust, automatic, interoperable and scalable deployment and operability solutions. At the same time, the limitations of such constrained devices impose strict challenges regarding complexity, energy consumption, time-efficiency and mobility. This research contributes new lightweight solutions to facilitate automatic deployment and operability of LLNs. It mainly tackles the aforementioned challenges through the proposition of novel component-based, automatic and efficient SD solutions that ensure extensibility and adaptability to various LLN environments. Building upon such architecture, a first fully-distributed, hybrid pushpull SD solution dubbed EADP (Extensible Adaptable Discovery Protocol) is proposed based on the well-known Trickle algorithm. Motivated by EADPs’ achievements, new methods to optimise Trickle are introduced. Such methods allow Trickle to encompass a wide range of algorithms and extend its usage to new application domains. One of the new applications is concretized in the TrickleSD protocol aiming to build automatic, reliable, scalable, and time-efficient SD. To optimise the energy efficiency of TrickleSD, two mechanisms improving broadcast communication in LLNs are proposed. Finally, interoperable standards-based SD in the IoT is demonstrated, and methods combining zero-configuration operations with infrastructure-based solutions are proposed. Experimental evaluations of the above contributions reveal that it is possible to achieve automatic, cost-effective, time-efficient, lightweight, and interoperable SD in LLNs. These achievements open novel perspectives for zero-configuration capabilities in the IoT and promise to bring the ‘things’ to all people everywhere

Connecting the World of Embedded Mobiles: The RIOT Approach to Ubiquitous Networking for the Internet of Things

The Internet of Things (IoT) is rapidly evolving based on low-power compliant protocol standards that extend the Internet into the embedded world. Pioneering implementations have proven it is feasible to inter-network very constrained devices, but had to rely on peculiar cross-layered designs and offer a minimalistic set of features. In the long run, however, professional use and massive deployment of IoT devices require full-featured, cleanly composed, and flexible network stacks. This paper introduces the networking architecture that turns RIOT into a powerful IoT system, to enable low-power wireless scenarios. RIOT networking offers (i) a modular architecture with generic interfaces for plugging in drivers, protocols, or entire stacks, (ii) support for multiple heterogeneous interfaces and stacks that can concurrently operate, and (iii) GNRC, its cleanly layered, recursively composed default network stack. We contribute an in-depth analysis of the communication performance and resource efficiency of RIOT, both on a micro-benchmarking level as well as by comparing IoT communication across different platforms. Our findings show that, though it is based on significantly different design trade-offs, the networking subsystem of RIOT achieves a performance equivalent to that of Contiki and TinyOS, the two operating systems which pioneered IoT software platforms

The Programmable City

AbstractThe worldwide proliferation of mobile connected devices has brought about a revolution in the way we live, and will inevitably guide the way in which we design the cities of the future. However, designing city-wide systems poses a new set of challenges in terms of scale, manageability and citizen involvement. Solving these challenges is crucial to making sure that the vision of a programmable Internet of Things (IoT) becomes reality. In this article we will analyse these issues and present a novel programming approach to designing scalable systems for the Internet of Things, with an emphasis on smart city applications, that addresses these issues

The Potential for Machine Learning Analysis over Encrypted Data in Cloud-based Clinical Decision Support - Background and Review

This paper appeared at the 8th Australasian Workshop on Health Informatics and Knowledge Management (HIKM 2015), Sydney, Australia, January 2015. Conferences in Research and Practice in Information Technology (CRPIT), Vol. 164, Anthony Maeder and Jim Warren, Ed. Reproduction for academic, not-for profit purposes permitted provided this text is includedIn an effort to reduce the risk of sensitive data exposure in untrusted networks such as the public cloud, increasing attention has recently been given to encryption schemes that allow specific computations to occur on encrypted data, without the need for decryption. This relies on the fact that some encryption algorithms display the property of homomorphism, which allows them to manipulate data in a meaningful way while still in encrypted form. Such a framework would find particular relevance in Clinical Decision Support (CDS) applications deployed in the public cloud. CDS applications have an important computational and analytical role over confidential healthcare information with the aim of supporting decision-making in clinical practice. This review paper examines the history and current status of homomoprhic encryption and its potential for preserving the privacy of patient data underpinning cloud-based CDS applications