360 research outputs found
A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead
Physical layer security which safeguards data confidentiality based on the
information-theoretic approaches has received significant research interest
recently. The key idea behind physical layer security is to utilize the
intrinsic randomness of the transmission channel to guarantee the security in
physical layer. The evolution towards 5G wireless communications poses new
challenges for physical layer security research. This paper provides a latest
survey of the physical layer security research on various promising 5G
technologies, including physical layer security coding, massive multiple-input
multiple-output, millimeter wave communications, heterogeneous networks,
non-orthogonal multiple access, full duplex technology, etc. Technical
challenges which remain unresolved at the time of writing are summarized and
the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication
Recent Advances in Joint Wireless Energy and Information Transfer
In this paper, we provide an overview of the recent advances in
microwave-enabled wireless energy transfer (WET) technologies and their
applications in wireless communications. Specifically, we divide our
discussions into three parts. First, we introduce the state-of-the-art WET
technologies and the signal processing techniques to maximize the energy
transfer efficiency. Then, we discuss an interesting paradigm named
simultaneous wireless information and power transfer (SWIPT), where energy and
information are jointly transmitted using the same radio waveform. At last, we
review the recent progress in wireless powered communication networks (WPCN),
where wireless devices communicate using the power harvested by means of WET.
Extensions and future directions are also discussed in each of these areas.Comment: Conference submission accepted by ITW 201
Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey
This paper provides a comprehensive review of the domain of physical layer
security in multiuser wireless networks. The essential premise of
physical-layer security is to enable the exchange of confidential messages over
a wireless medium in the presence of unauthorized eavesdroppers without relying
on higher-layer encryption. This can be achieved primarily in two ways: without
the need for a secret key by intelligently designing transmit coding
strategies, or by exploiting the wireless communication medium to develop
secret keys over public channels. The survey begins with an overview of the
foundations dating back to the pioneering work of Shannon and Wyner on
information-theoretic security. We then describe the evolution of secure
transmission strategies from point-to-point channels to multiple-antenna
systems, followed by generalizations to multiuser broadcast, multiple-access,
interference, and relay networks. Secret-key generation and establishment
protocols based on physical layer mechanisms are subsequently covered.
Approaches for secrecy based on channel coding design are then examined, along
with a description of inter-disciplinary approaches based on game theory and
stochastic geometry. The associated problem of physical-layer message
authentication is also introduced briefly. The survey concludes with
observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with
arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials,
201
D13.2 Techniques and performance analysis on energy- and bandwidth-efficient communications and networking
Deliverable D13.2 del projecte europeu NEWCOM#The report presents the status of the research work of the
various Joint Research Activities (JRA) in WP1.3 and the results
that were developed up to the second year of the project. For
each activity there is a description, an illustration of the
adherence to and relevance with the identified fundamental
open issues, a short presentation of the main results, and a
roadmap for the future joint research. In the Annex, for each
JRA, the main technical details on specific scientific activities
are described in detail.Peer ReviewedPostprint (published version
Data Collection in Two-Tier IoT Networks with Radio Frequency (RF) Energy Harvesting Devices and Tags
The Internet of things (IoT) is expected to connect physical objects and end-users using technologies such as wireless sensor networks and radio frequency identification (RFID). In addition, it will employ a wireless multi-hop backhaul to transfer data collected by a myriad of devices to users or applications such as digital twins operating in a Metaverse. A critical issue is that the number of packets collected and transferred to the Internet is bounded by limited network resources such as bandwidth and energy. In this respect, IoT networks have adopted technologies such as time division multiple access (TDMA), signal interference cancellation (SIC) and multiple-input multiple-output (MIMO) in order to increase network capacity. Another fundamental issue is energy. To this end, researchers have exploited radio frequency (RF) energy-harvesting technologies to prolong the lifetime of energy constrained sensors and smart devices. Specifically, devices with RF energy harvesting capabilities can rely on ambient RF sources such as access points, television towers, and base stations. Further, an operator may deploy dedicated power beacons that serve as RF-energy sources. Apart from that, in order to reduce energy consumption, devices can adopt ambient backscattering communication technologies. Advantageously, backscattering allows devices to communicate using negligible amount of energy by modulating ambient RF signals.
To address the aforementioned issues, this thesis first considers data collection in a two-tier MIMO ambient RF energy-harvesting network. The first tier consists of routers with MIMO capability and a set of source-destination pairs/flows. The second tier consists of energy harvesting devices that rely on RF transmissions from routers for energy supply. The problem is to determine a minimum-length TDMA link schedule that satisfies the traffic demand of source-destination pairs and energy demand of energy harvesting devices. It formulates the problem as a linear program (LP), and outlines a heuristic to construct transmission sets that are then used by the said LP. In addition, it outlines a new routing metric that considers the energy demand of energy harvesting devices to cope with routing requirements of IoT networks. The simulation results show that the proposed algorithm on average achieves 31.25% shorter schedules as compared to competing schemes. In addition, the said routing metric results in link schedules that are at most 24.75% longer than those computed by the LP
Energy-Efficient NOMA Enabled Heterogeneous Cloud Radio Access Networks
Heterogeneous cloud radio access networks (H-CRANs) are envisioned to be
promising in the fifth generation (5G) wireless networks. H-CRANs enable users
to enjoy diverse services with high energy efficiency, high spectral
efficiency, and low-cost operation, which are achieved by using cloud computing
and virtualization techniques. However, H-CRANs face many technical challenges
due to massive user connectivity, increasingly severe spectrum scarcity and
energy-constrained devices. These challenges may significantly decrease the
quality of service of users if not properly tackled. Non-orthogonal multiple
access (NOMA) schemes exploit non-orthogonal resources to provide services for
multiple users and are receiving increasing attention for their potential of
improving spectral and energy efficiency in 5G networks. In this article a
framework for energy-efficient NOMA H-CRANs is presented. The enabling
technologies for NOMA H-CRANs are surveyed. Challenges to implement these
technologies and open issues are discussed. This article also presents the
performance evaluation on energy efficiency of H-CRANs with NOMA.Comment: This work has been accepted by IEEE Network. Pages 18, Figure
Resource allocation in future green wireless networks : applications and challenges
Over the past few years, green radio communication has been an emerging topic since the footprint from the Information and Communication Technologies (ICT) is predicted to increase 7.3% annually and then exceed 14% of the global footprint by 2040. Moreover, the explosive progress of ICT, e.g., the fifth generation (5G) networks, has resulted in expectations of achieving 10-fold longer device battery lifetime, and 1000-fold higher global mobile data traffic over the fourth generation (4G) networks. Therefore, the demands for increasing the data rate and the lifetime while reducing the footprint in the next-generation wireless networks call for more efficient utilization of energy and other resources. To overcome this challenge, the concepts of small-cell, energy harvesting, and wireless information and power transfer networks can be evaluated as promising solutions for re-greening the world.
In this dissertation, the technical contributions in terms of saving economical cost, protecting the environment, and guaranteeing human health are provided. More specifically, novel communication scenarios are proposed to minimize energy consumption and hence save economic costs. Further, energy harvesting (EH) techniques are applied to exploit available green resources in order to reduce carbon footprint and then protect the environment. In locations where implemented user devices might not harvest energy directly from natural resources, base stations could harvest-and-store green energy and then use such energy to power the devices wirelessly. However, wireless power transfer (WPT) techniques should be used in a wise manner to avoid electromagnetic pollution and then guarantee human health. To achieve all these aspects simultaneously, this thesis proposes promising schemes to optimally manage and allocate resources in future networks.
Given this direction, in the first part, Chapter 2 mainly studies a transmission power minimization scheme for a two-tier heterogeneous network (HetNet) over frequency selective fading channels. In addition, the HetNet backhaul connection is unable to support a sufficient throughput for signaling an information exchange between two tiers. A novel idea is introduced in which the time reversal (TR) beamforming technique is used at a femtocell while zero-forcing-based beamforming is deployed at a macrocell. Thus, a downlink power minimizationscheme is proposed, and optimal closed-form solutions are provided.
In the second part, Chapters 3, 4, and 5 concentrate on EH and wireless information and power transfer (WIPT) using RF signals. More specifically, Chapter 3 presents an overview of the recent progress in green radio communications and discusses potential technologies for some emerging topics on the platforms of EH and WPT. Chapter 4 develops a new integrated information and energy receiver architecture based on the direct use of alternating current (AC) for computation. It is shown that the proposed approach enhances not only the computational ability but also the energy efficiency over the conventional one. Furthermore, Chapter 5 proposes a novel resource allocation scheme in simultaneous wireless information and power transfer (SWIPT) networks where three crucial issues: power-efficient improvement, user-fairness guarantee, and non-ideal channel reciprocity effect mitigation, are jointly addressed. Hence, novel methods to derive optimal and suboptimal solutions are provided.
In the third part, Chapters 6, 7, and 8 focus on simultaneous lightwave information and power transfer (SLIPT) for indoor applications, as a complementary technology to RF SWIPT. In this research, Chapter 6 investigates a hybrid RF/visible light communication (VLC) ultrasmall cell network where optical transmitters deliver information and power using the visible light, whereas an RF access point works as a complementary power transfer system. Thus, a novel resource allocation scheme exploiting RF and visible light for power transfer is devised. Chapter 7 proposes the use of lightwave power transfer to enable future sustainable Federated Learning (FL)-based wireless networks. FL is a new data privacy protection technique for training shared machine learning models in a distributed approach. However, the involvement of energy-constrained mobile devices in the construction of the shared learning models may significantly reduce their lifetime. The proposed approach can support the FL-based wireless network to overcome the issue of limited energy at mobile devices. Chapter 8 introduces a novel framework for collaborative RF and lightwave power transfer for wireless communication networks. The constraints on the transmission power set by safety regulations result in significant challenges to enhance the power transfer performance. Thus, the study of technologies complementary to conventional RF SWIPT is essential. To cope with this isue, this chapter proposes a novel collaborative RF and lightwave power transfer technology for next-generation wireless networks
Green Cellular Networks: A Survey, Some Research Issues and Challenges
Energy efficiency in cellular networks is a growing concern for cellular
operators to not only maintain profitability, but also to reduce the overall
environment effects. This emerging trend of achieving energy efficiency in
cellular networks is motivating the standardization authorities and network
operators to continuously explore future technologies in order to bring
improvements in the entire network infrastructure. In this article, we present
a brief survey of methods to improve the power efficiency of cellular networks,
explore some research issues and challenges and suggest some techniques to
enable an energy efficient or "green" cellular network. Since base stations
consume a maximum portion of the total energy used in a cellular system, we
will first provide a comprehensive survey on techniques to obtain energy
savings in base stations. Next, we discuss how heterogeneous network deployment
based on micro, pico and femto-cells can be used to achieve this goal. Since
cognitive radio and cooperative relaying are undisputed future technologies in
this regard, we propose a research vision to make these technologies more
energy efficient. Lastly, we explore some broader perspectives in realizing a
"green" cellular network technologyComment: 16 pages, 5 figures, 2 table
- …