667 research outputs found
The Role of Inter-Controller Traffic for Placement of Distributed SDN Controllers
We consider a distributed Software Defined Networking (SDN) architecture
adopting a cluster of multiple controllers to improve network performance and
reliability. Besides the Openflow control traffic exchanged between controllers
and switches, we focus on the control traffic exchanged among the controllers
in the cluster, needed to run coordination and consensus algorithms to keep the
controllers synchronized. We estimate the effect of the inter-controller
communications on the reaction time perceived by the switches depending on the
data-ownership model adopted in the cluster. The model is accurately validated
in an operational Software Defined WAN (SDWAN). We advocate a careful placement
of the controllers, that should take into account both the above kinds of
control traffic. We evaluate, for some real ISP network topologies, the delay
tradeoffs for the controllers placement problem and we propose a novel
evolutionary algorithm to find the corresponding Pareto frontier. Our work
provides novel quantitative tools to optimize the planning and the design of
the network supporting the control plane of SDN networks, especially when the
network is very large and in-band control plane is adopted. We also show that
for operational distributed controllers (e.g. OpenDaylight and ONOS), the
location of the controller which acts as a leader in the consensus algorithm
has a strong impact on the reactivity perceived by switches.Comment: 14 page
Flexible architecture for the future internet scalability of SDN control plane
Software-Defined Networking (SDN) separates the control plane from the data plane. The initial SDN approach involves a single centralized controller, which may not scale properly as a network grows in size. Distributed controllers have emerged to address the disadvantages of a single centralized controller. The control architecture needs to be distributed with traffic control between switches and controllers and among the controllers in order to allow SDNs for several thousand switches. One of the most significant research challenges for distributed controller architectures is to effectively manage controllers, which includes allocating enough controllers to appropriate network locations. To address these daunting issues, we make the following major contributions:
This thesis expands the method of solving the Control Placement Problem (CPP) based on the K-means and K-center algorithms to include a Hierarchical Controller Placement Problem (HCPP), located at a high level of Super Controller (SC), a middle level of Master Controllers (MCs), and the lowest level of domain controllers (DCs). The optimization metric addresses latency between the controller and the switches assigned to it.. The proposed architecture and methodology are implemented using the topology of Western European NRENs from the Internet Topology Zoo. The entire network topology is divided into clusters, and the optimal number of controllers (DCs) and their placement are determined for each cluster. MC placement optimization determines the optimal number of MCs and their optimal placement. As a second contribution, an accumulated latency is defined to solve CPP, which takes into account both the latency between the controller and its associated switches and the latency between controllers. Under the constraint of latency, an optimization problem is formulated as per mixed-integer linear programming (MILP). The goal of the research is to reduce accumulated latency while also reducing the number of network controllers and optimizing their placement to achieve an optimal balance. The performance of the developed method is evaluated on Internet2 OS3E real network topology. To achieve the third objective, a metric was developed that includes reliability. The communication latency between controllers should also be considered because a low controller-switch delay does not always imply a short controller-controller delay for a particular controller placement. As the third contribution, we propose a novel metric for CPP to improve the reliability of controllers that takes into account both communication latency and communication reliability between switches and controllers, as well as between controllers. When a single link fails, reliability is taken into account. This aspect concluded by identifying the optimal controller placement to achieve low latencies in control plane traffic. The goal of this project is to reduce the average latency. As the fourth contribution, this study evaluates the Joint Latency and Reliability-aware Controller Placement (LRCP) optimization model. As the evaluation metric, control plane latency (CPL) is defined as the sum of the average switch-to-controller latency and average inter-controller latency. The latency of the control plane, utilizing the actual latencies of the real network topology, is calculated for every optimum placement in the network. In the case of a failure of the single link, the actual CPL for LRCP placements is calculated and evaluated to determine how good LRCP placements are. CPL metrics are used to compare latency and reliability metrics with other models. This study provides proof that the developed methodologies for large-scale networks are highly powerful in terms of searching for all feasible controller placements while assessing the outcomes. In addition, compared to previous work including latency among controllers and reliability for an event of single-link failure.La xarxa definida per programari (SDN) separa el pla de control del pla de dades. L’enfocament
SDN inicial implica un únic controlador centralitzat, que pot no escalar correctament a mesura
que la xarxa creixi de mida. Els controladors distribuïts han sorgit per abordar els inconvenients
d’un únic controlador centralitzat. . Un dels reptes de recerca més importants per a
les arquitectures de controladors distribuïts és gestionar de manera eficaç els controladors,
que inclou l’assignació de controladors suficients a les ubicacions de xarxa adequades. Per
abordar aquests problemes, fem les següents contribucions.
Aquesta tesi amplia el mètode de resolució del Problema de Col·locació de Control (CPP)
basat en els algorismes de K-means i K-center per incloure un Problema de Col·locació de
Controladors Jeràrquics (HCPP), situat a un nivell alt de Super Controller (SC), un nivell
de controladors mestres (MC) i el nivell més baix de controladors de domini (DC). La
mètrica d’optimització és la latència entre el controlador i els commutadors assignats a
aquest. L’arquitectura i la metodologia proposades s’implementen utilitzant la topologia de
NREN d’Europa occidental de l’Internet Topology Zoo. La topologia de la xarxa es divideix
en clústers i es determina el nombre òptim de controladors de domini (DC) i la seva ubicació
per a cada clúster. L’optimització de la ubicació de MC determina el nombre òptim de MC i
la seva col·locació òptima.
Com a segona contribució, es defineix una latència acumulada per resoldre el CPP,
que té en compte tant la latència entre el controlador i els seus commutadors associats
com la latència entre controladors. Sota la restricció de la latència, es formula un problema
d’optimització segons la programació lineal de nombres enters mixts (MILP). L’objectiu de la
investigació és reduir la latència acumulada alhora que es redueix el nombre de controladors
de xarxa i optimitza la seva col·locació per aconseguir un equilibri òptim. El rendiment del
mètode desenvolupat s’avalua en la topologia de xarxa real d’Internet2 OS3E.
Per aconseguir el tercer objectiu, es va desenvolupar una mètrica que inclou la fiabilitat.
També s’ha de tenir en compte la latència de comunicació entre controladors perquè un retard
baix entre el commutador i el controlador no sempre implica un retard curt del controladorcontrolador
per a una ubicació concreta dels controladors. Com a tercera contribució,
proposem una nova mètrica per al CPP per millorar la fiabilitat dels controladors que tingui en compte tant la latència de la comunicació com la fiabilitat de la comunicació entre
commutadors i controladors, així com entre controladors. La fiabilitat es té en compte quan
falla un únic enllaç identificant la col·locació òptima dels controladors per aconseguir baixes
latències en el trànsit del pla de control. L’objectiu d’aquest projecte és reduir la latència
mitjana.
Com a quarta contribució, aquest estudi avalua el model d’optimització Joint Latency
and Reliability-aware Controller Placement (LRCP). Com a mètrica d’avaluació, la latència
del pla de control (CPL) es defineix com la suma de la latència mitjana de commutador a
controlador i la latència mitjana entre controladors. La latència del pla de control, utilitzant
les latències reals de la topologia de xarxa real, es calcula per a cada col·locació òptima a
la xarxa. En el cas d’una fallida en un únicenllaç, es calcula i s’avalua el CPL real de les
ubicacions LRCP per determinar com de bones són les ubicacions LRCP. Les mètriques CPL
s’utilitzen per comparar les mètriques de latència i fiabilitat amb altres models.
Aquest estudi proporciona la prova que les metodologies desenvolupades per a xarxes a
gran escala són molt potents pel que fa a la recerca de totes les ubicacions de controladors
factibles mentre s’avaluen els resultats. A més, en comparació amb el treball anterior, inclou
la latència entre els controladors i la fiabilitat per a un esdeveniment de fallada d’un enllaç
únic.Las redes definidas por software (SDN) separan el plano de control del plano de datos. El
enfoque inicial de SDN implica un único controlador centralizado, que puede no escalar
adecuadamente a medida que una red crece en tamaño. Los controladores distribuidos han
surgido para abordar las desventajas de un único controlador centralizado. Uno de los retos
de investigación más importantes para las arquitecturas de controladores distribuidos es la
gestión eficaz de los controladores, que incluye la asignación de suficientes controladores en
las ubicaciones adecuadas. Para hacer frente a estos problemas, realizamos las siguientes
contribuciones principales:
Esta tesis amplía el método de resolución del Problema de Colocación de Controles (CPP)
basado en los algoritmos K-means y K-center para incluir un Problema de Colocación de
Controladores Jerárquicos (HCPP), situado en un nivel alto de Super-controladores (SC), un
nivel medio de Controladores Maestros (MC), y el nivel más bajo de controladores de dominio
(DC). La métrica de optimización es la latencia entre el controlador y los conmutadores
asignados al mismo. . La arquitectura y la metodología propuestas se implementan utilizando
la topología de las NREN de Europa Occidental del TopologyZoo. La topología completa
de la red se divide en clústeres, y se determina el número óptimo de controladores de
dominio (CD) y su colocación para cada clúster. La optimización de la colocación de los
MC determina el número óptimo de MC y su colocación óptima.
Como segunda contribución, se define una latencia acumulada para resolver el CPP, que
tiene en cuenta tanto la latencia entre el controlador y sus conmutadores asociados como la
latencia entre los controladores. Bajo la restricción de la latencia, se formula un problema
de optimización según la programación lineal de enteros mixtos (MILP). El objetivo es
reducir la latencia acumulada al tiempo que se reduce el número de controladores de la red
y se optimiza su ubicación para lograr un equilibrio óptimo. El rendimiento del método
desarrollado se evalúa en la topología de Internet2 OS3E.
Para lograr el tercer objetivo, se desarrolló una métrica que incluye la fiabilidad. La
latencia de la comunicación entre controladores también debe tenerse en cuenta, ya que un
bajo retardo entre controladores y conmutadores no siempre implica un corto retardo entre
controladores para una determinada ubicación de los mismos. Como tercera contribución proponemos una nueva métrica para el CPP para mejorar la fiabilidad de los controladores
que tiene en cuenta tanto la latencia de la comunicación como la fiabilidad de la comunicación
entre los conmutadores y los controladores, así como entre los controladores. Se tiene en
cuenta la fiabilidad cuando falla un solo enlace. Este aspecto concluye con la identificación
de la ubicación óptima de los controladores para lograr bajas latencias en el tráfico del plano
de control. El objetivo es reducir la latencia media.
Como cuarta contribución, este estudio evalúa el modelo de optimización Joint Latency
and Reliability-aware Controller Placement (LRCP). Como métrica de evaluación, la latencia
del plano de control (CPL) se define como la suma de la latencia media entre conmutadores
y controladores y la latencia media entre controladores. La latencia del plano de control,
utilizando las latencias reales de la topología de la red, se calcula para cada ubicación óptima
en la red. En el caso de un fallo de un enlace, se calcula y evalúa la CPL real para las
colocaciones de LRCP con el fin de determinar lo buenas que son las colocaciones de LRCP.
Las métricas CPL se utilizan para comparar las métricas de latencia y fiabilidad con otros
modelos.
Este estudio demuestra que las metodologías desarrolladas para redes a gran escala son
muy potentes en cuanto a la búsqueda de todas las ubicaciones factibles de los controladores
mientras se evalúan los resultados. Además, en comparación con los trabajos anteriores, que
incluyen la latencia entre controladores y la fiabilidad para un caso de fallo de un solo enlacePostprint (published version
Software Defined Networks based Smart Grid Communication: A Comprehensive Survey
The current power grid is no longer a feasible solution due to
ever-increasing user demand of electricity, old infrastructure, and reliability
issues and thus require transformation to a better grid a.k.a., smart grid
(SG). The key features that distinguish SG from the conventional electrical
power grid are its capability to perform two-way communication, demand side
management, and real time pricing. Despite all these advantages that SG will
bring, there are certain issues which are specific to SG communication system.
For instance, network management of current SG systems is complex, time
consuming, and done manually. Moreover, SG communication (SGC) system is built
on different vendor specific devices and protocols. Therefore, the current SG
systems are not protocol independent, thus leading to interoperability issue.
Software defined network (SDN) has been proposed to monitor and manage the
communication networks globally. This article serves as a comprehensive survey
on SDN-based SGC. In this article, we first discuss taxonomy of advantages of
SDNbased SGC.We then discuss SDN-based SGC architectures, along with case
studies. Our article provides an in-depth discussion on routing schemes for
SDN-based SGC. We also provide detailed survey of security and privacy schemes
applied to SDN-based SGC. We furthermore present challenges, open issues, and
future research directions related to SDN-based SGC.Comment: Accepte
Multi-controller Based Software-Defined Networking: A Survey
Software-Defined Networking (SDN) is a novel network paradigm that enables flexible management for networks. As the network size increases, the single centralized controller cannot meet the increasing demand for flow processing. Thus, the promising solution for SDN with large-scale networks is the multi-controller. In this paper, we present a compressive survey for multi-controller research in SDN. First, we introduce the overview of multi-controller, including the origin of multi-controller and its challenges. Then, we classify multi-controller research into four aspects (scalability, consistency, reliability, load balancing) depending on the process of implementing the multi-controller. Finally, we propose some relevant research issues to deal with in the future and conclude the multi-controller research
Technology-related disasters:a survey towards disaster-resilient software defined networks
Resilience against disaster scenarios is essential to network operators, not only because of the potential economic impact of a disaster but also because communication networks form the basis of crisis management. COST RECODIS aims at studying measures, rules, techniques and prediction mechanisms for different disaster scenarios. This paper gives an overview of different solutions in the context of technology-related disasters. After a general overview, the paper focuses on resilient Software Defined Networks
- …