CMD: A Multi-Channel Coordination Scheme for Emergency Message Dissemination in IEEE 1609.4

In the IEEE 1609.4 legacy standard for multi-channel communications in vehicular ad hoc networks(VANETs), the control channel (CCH) is dedicated to broadcast safety messages while the service channels (SCH's) are dedicated to transmit infotainment service content. However, the SCH can be used as an alternative to transmit high priority safety messages in the event that they are invoked during the service channel interval (SCHI). This implies that there is a need to transmit safety messages across multiple available utilized channels to ensure that all vehicles receive the safety message. Transmission across multiple SCH's using the legacy IEEE 1609.4 requires multiple channel switching and therefore introduces further end-to-end delays. Given that safety messaging is a life critical application, it is important that optimal end-to-end delay performance is derived in multi-channel VANET scenarios to ensure reliable safety message dissemination. To tackle this challenge, three primary contributions are in this article: first, a channel coordinator selection approach based on the least average separation distance (LAD) to the vehicles that expect to tune to other SCH's and operates during the control channel interval (CCHI) is proposed. Second, a model to determine the optimal time intervals in which CMD operates during the CCHI is proposed. Third, a contention back-off mechanism for safety message transmission during the SCHI is proposed. Computer simulations and mathematical analysis show that CMD performs better than the legacy IEEE 1609.4 and a selected state-of-the-art multi-channel message dissemination schemes in terms of end-to-end delay and packet reception ratio.Comment: 15 pages, 10 figures, 7 table

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

An efficient multichannel wireless sensor networks MAC protocol based on IEEE 802.11 distributed co-ordinated function.

This research aimed to create new knowledge and pioneer a path in the area relating to future trends in the WSN, by resolving some of the issues at the MAC layer in Wireless Sensor Networks. This work introduced a Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks. This work commenced by surveying different protocols: contention-based MAC protocols, transport layer protocols, cross-layered design and multichannel multi-radio assignments. A number of existing protocols were analysed, each attempting to resolve one or more problems faced by the current layers. The 802.15.4 performed very poorly at high data rate and at long range. Therefore 802.15.4 is not suitable for sensor multimedia or surveillance system with streaming data for future multichannel multi-radio systems. A survey on 802.11 DCF - which was designed mainly for wireless networks –supports and confirm that it has a power saving mechanism which is used to synchronise nodes. However it uses a random back-off mechanism that cannot provide deterministic upper bounds on channel access delay and as such cannot support real-time traffic. The weaknesses identified by surveying this protocol form the backbone of this thesis The overall aim for this thesis was to introduce multichannel with single radio as a new paradigm for IEEE 802.11 Distributed Coordinated Function (DCF) in wireless sensor networks (WSNs) that is used in a wide range of applications, from military application, environmental monitoring, medical care, smart buildings and other industry and to extend WSNs with multimedia capability which sense for instance sounds or motion, video sensor which capture video events of interest. Traditionally WSNs do not need high data rate and throughput, since events are normally captured periodically. With the paradigm shift in technology, multimedia streaming has become more demanding than data sensing applications as such the need for high data rate protocol for WSN which is an emerging technology in this area. The IEEE 802.11 can support data rates up to 54Mbps and 802.11 DCF was designed specifically for use in wireless networks. This thesis focused on designing an algorithm that applied multichannel to IEEE 802.11 DCF back-off algorithm to reduce the waiting time of a node and increase throughput when attempting to access the medium. Data collection in WSN tends to suffer from heavy congestion especially nodes nearer to the sink node. Therefore, this thesis proposes a contention based MAC protocol to address this problem from the inspiration of the 802.11 DCF backoff algorithm resulting from a comparison of IEEE 802.11 and IEEE 802.15.4 for Future Green Multichannel Multi-radio Wireless Sensor Networks

Multi-Cell, Multi-Channel Scheduling with Probabilistic Per-Packet Real-Time Guarantee

For mission-critical sensing and control applications such as those to be enabled by 5G Ultra-Reliable, Low-Latency Communications (URLLC), it is critical to ensure the communication quality of individual packets. Prior studies have considered Probabilistic Per-packet Real-time Communications (PPRC) guarantees for single-cell, single-channel networks with implicit deadline constraints, but they have not considered real-world complexities such as inter-cell interference and multiple communication channels. Towards ensuring PPRC in multi-cell, multi-channel wireless networks, we propose a real-time scheduling algorithm based on \emph{local-deadline-partition (LDP)}. The LDP algorithm is suitable for distributed implementation, and it ensures probabilistic per-packet real-time guarantee for multi-cell, multi-channel networks with general deadline constraints. We also address the associated challenge of the schedulability test of PPRC traffic. In particular, we propose the concept of \emph{feasible set} and identify a closed-form sufficient condition for the schedulability of PPRC traffic. We propose a distributed algorithm for the schedulability test, and the algorithm includes a procedure for finding the minimum sum work density of feasible sets which is of interest by itself. We also identify a necessary condition for the schedulability of PPRC traffic, and use numerical studies to understand a lower bound on the approximation ratio of the LDP algorithm. We experimentally study the properties of the LDP algorithm and observe that the PPRC traffic supportable by the LDP algorithm is significantly higher than that of a state-of-the-art algorithm

Economy of Spectrum Access in Timy Varying Multichannel Networks

We consider a wireless network consisting of two classes of potentially mobile users: primary users and secondary users. Primary users license frequency channels and transmit in their respective bands as required. Secondary users resort to unlicensed access of channels that are not used by their primary users. Primaries impose access fees on the secondaries which depend on access durations and may be different for different primary channels and different available communication rates in the channels. The available rates to the secondaries change with time depending on the usage status of the primaries and the random access quality of channels. Secondary users seek to minimize their total access cost subject to stabilizing their queues whenever possible. Our first contribution is to present a dynamic link scheduling policy that attains this objective. The computation time of this policy, however, increases exponentially with the size of the network. We next present an approximate scheduling scheme based on graph partitioning that is distributed and attains arbitrary trade-offs between aggregate access cost and computation times of the schedules, irrespective of the size of the network. Our performance guarantees hold for general arrival and primary usage statistics and multihop networks. Each secondary user is, however, primarily interested in minimizing the cost it incurs, rather than in minimizing the aggregate cost. Thus, it will schedule its transmissions so as to minimize the aggregate cost only if it perceives that the aggregate cost is shared among the users as per a fair cost sharing scheme. Using concepts from cooperative game theory, we develop a rational basis for sharing the aggregate cost among secondary sessions and present a cost sharing mechanism that conforms to the above basis