5,784 research outputs found
Passivity-based harmonic control through series/parallel damping of an H-bridge rectifier
Nowadays the H-bridge is one of the preferred solutions to connect DC loads or distributed sources to the single-phase grid. The control aims are: sinusoidal grid current with unity power factor and optimal DC voltage regulation capability. These objectives should be satisfied, regardless the conditions of the grid, the DC load/source and the converter nonlinearities. In this paper a passivity-based approach is thoroughly investigated proposing a damping-based solution for the error dynamics. Practical experiments with a real converter validate the analysis.
Design and Implementation of Takagi-Sugeno Fuzzy Tracking Control for a DC-DC Buck Converter
This paper presents the design and implementation of a Takagi-Sugeno (T-S) fuzzy controller for a DC-DC buck converter using Arduino board. The proposed fuzzy controller is able to pilot the states of the buck converter to track a reference model. The T-S fuzzy model is employed, firstly, to represent exactly the dynamics of the nonlinear buck converter system, and then the considered controller is designed on the basis of a concept called Virtual Desired Variables (VDVs). In this case, a two-stage design procedure is developed: i) determine the reference model according to the desired output voltage, ii) determine the fuzzy controller gains by solving a set of Linear Matrix Inequalities (LMIs). A digital implementation of the proposed T-S fuzzy controller is carried out using the ATmega328P-based Microcontroller of the Arduino Uno board. Simulations and experimental results demonstrate the validity and effectiveness of the proposed control scheme
Fast Adaptive Robust Differentiator Based Robust-Adaptive Control of Grid-Tied Inverters with a New L Filter Design Method
In this research, a new nonlinear and adaptive state feedback controller with a fast-adaptive robust differentiator is presented for grid-tied inverters. All parameters and external disturbances are taken as uncertain in the design of the proposed controller without the disadvantages of singularity and over-parameterization. A robust differentiator based on the second order sliding mode is also developed with a fast-adaptive structure to be able to consider the time derivative of the virtual control input. Unlike the conventional backstepping, the proposed differentiator overcomes the problem of explosion of complexity. In the closed-loop control system, the three phase source currents and direct current (DC) bus voltage are assumed to be available for feedback. Using the Lyapunov stability theory, it is proven that the overall control system has the global asymptotic stability. In addition, a new simple L filter design method based on the total harmonic distortion approach is also proposed. Simulations and experimental results show that the proposed controller assurances drive the tracking errors to zero with better performance, and it is robust against all uncertainties. Moreover, the proposed L filter design method matches the total harmonic distortion (THD) aim in the design with the experimental result
A Novel Fuzzy Logic Based Adaptive Supertwisting Sliding Mode Control Algorithm for Dynamic Uncertain Systems
This paper presents a novel fuzzy logic based Adaptive Super-twisting Sliding
Mode Controller for the control of dynamic uncertain systems. The proposed
controller combines the advantages of Second order Sliding Mode Control, Fuzzy
Logic Control and Adaptive Control. The reaching conditions, stability and
robustness of the system with the proposed controller are guaranteed. In
addition, the proposed controller is well suited for simple design and
implementation. The effectiveness of the proposed controller over the first
order Sliding Mode Fuzzy Logic controller is illustrated by Matlab based
simulations performed on a DC-DC Buck converter. Based on this comparison, the
proposed controller is shown to obtain the desired transient response without
causing chattering and error under steady-state conditions. The proposed
controller is able to give robust performance in terms of rejection to input
voltage variations and load variations.Comment: 14 page
Improvement of the linear quadratic regulator control applied to a DC-DC boost converter driving a permanent magnet direct current motor
This article discusses a new robust control technique that enables the DC-DC boost converter driving a permanent magnet direct current (PMDC) motor to operate in high static and dynamic performances. The new technique is based on the design of a both linear quadratic regulator (LQR) and linear quadratic regulator-proportional integral (LQR-PI) type controllers, which have the advantage of eliminating oscillations, overshoots and fluctuations on different characteristics in steady-state system operation. In order to increase the output voltage, the LQR regulator is combined with a first-order system represented in the form of a closed-loop transfer function, the latter raising the output voltage to 24 volts, this voltage is enough to drive the permanent magnet direct current motor. The contribution of this paper is the creation of a robust control system represented in the form of a hybrid corrector able to regulate steady-state and transient disturbances and oscillations as well as to increase DC-DC boost converter output voltage for the PMDC motor to operate at rated voltage. The results of the three control techniques are validated by MATLAB Simulink
- …