Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Aeronautics Research Mission Directorate Projects at NASA Glenn Research Center for 2015

This document is intended to enable the more effective transition of NASA Glenn Research Center (GRC) SBIR technologies funded by the Small Business Innovation Research (SBIR) program as well as its companion, the Small Business Technology Transfer (STTR) program into NASA Aeronautics Research Mission Directorate (ARMD) projects. Primarily, it is intended to help NASA program and project managers find useful technologies that have undergone extensive research and development (RRD), through Phase II of the SBIR program; however, it can also assist non-NASA agencies and commercial companies in this process. aviation safety, unmanned aircraft, ground and flight test technique, low emissions, quiet performance, rotorcraf

Pioneering the use of a plenoptic Adaptive Optics system for Free Space Optical Communications

Tesis doctoral en Astrofísica, fecha de lectura 30 de Septiembre de 2019In this thesis, an Adaptive Optics proposal is presented and experimentally verified at both laboratory and telescope, with the objective of compensating the atmospheric aberrations in the uplink beam and, therefore, ameliorate Free Space Optical Communication links performance and the generation of Laser Guide Stars for conventional AO systems. The research focuses on the active correction of Ground to Space laser beams (optical links and artificial stars), as downlink communications resemble conventional astronomical observations when applying Adaptive Optics techniques: the light is originated in space and it travels downwards through the atmosphere to the receiver (where the AO system would be placed), whereas the uplink needs to be corrected before existing the launching telescope by measuring the atmospheric wavefront with an a-priori unknown reference source. The uplink pre-compensation entails a scientific and technological challenge. The uplink correction problem was deeply studied by the formulation of all possible solutions, which are properly modelled and simulated with an already existing Adaptive Optics Matlab toolbox, into which new functionalities were coded and integrated (upwards Fresnel propagation, new concept wavefront sensor, etc.). Based on the simulation outcome, the corresponding requirements were formulated for the design of an uplink corrector AO system from the very last element to the control strategy. After the proper hardware acquisition (of both COTS elements and custom-built components), the uplink corrector laboratory scale prototype was built and integrated at IAC laboratory facilities. Finally from January 2019 to May 2019, the Uplink Wavefront Corrector System was integrated at the Optical Ground Station telescope at Teide Observatory, successfully demonstrating the uplink precompensation of the laser beam

Recent advances in the capture and display of macroscopic and microscopic 3-D scenes by integral imaging

The capture and display of images of 3-D scenes under incoherent and polychromatic illumination is currently a hot topic of research, due to its broad applications in bioimaging, industrial procedures, military and surveillance, and even in the entertainment industry. In this context, Integral Imaging (InI) is a very competitive technology due to its capacity for recording with a single exposure the spatial-angular information of light-rays emitted by the 3-D scene. From this information, it is possible to calculate and display a collection of horizontal and vertical perspectives with high depth of field. It is also possible to calculate the irradiance of the original scene at different depths, even when these planes are partially occluded or even immersed in a scattering medium. In this paper, we describe the fundaments of InI and the main contributions to its development. We also focus our attention on the recent advances of the InI technique. Specifically, the application of InI concept to microscopy is analyzed and the achievements in resolution and depth of field are explained. In a different context, we also present the recent advances in the capture of large scenes. The progresses in the algorithms for the calculation of displayable 3-D images and in the implementation of setups for the 3-D displays are reviewed

Smart Technologies for Precision Assembly

This open access book constitutes the refereed post-conference proceedings of the 9th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2020, held virtually in December 2020. The 16 revised full papers and 10 revised short papers presented together with 1 keynote paper were carefully reviewed and selected from numerous submissions. The papers address topics such as assembly design and planning; assembly operations; assembly cells and systems; human centred assembly; and assistance methods in assembly

The Fresnel Zone Light Field Spectral Imager

This thesis provides a computational model and the first experimental demonstration of a Fresnel zone light field spectral imaging (FZLFSI) system. This type of system couples an axial dispersion binary diffractive optic with light field (plenoptic) camera designs providing a snapshot spectral imaging capability. A computational model of the system was developed based on wave optics methods using Fresnel propagation. It was validated experimentally and provides excellent demonstration of system capabilities. The experimentally demonstrated system was able to synthetically refocus monochromatic images across greater than a 100nm bandwidth. Furthermore, the demonstrated system was modeled to have a full range of approximately 400 to 800nm with close to a 15nm spectral sampling interval. While images of multiple diffraction orders were observed in the measured light fields, they did not degrade the system\u27s performance. Experimental demonstration also showed the capability to resolve between and process two different spectral signatures from a single snapshot. For future FZLFSI designs, the study noted there is a fundamental design trade-off, where improved spectral and spatial resolution reduces the spectral range of the system

The development of a hybrid virtual reality/video view-morphing display system for teleoperation and teleconferencing

Thesis (S.M.)--Massachusetts Institute of Technology, System Design & Management Program, 2000.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 84-89).The goal of this study is to extend the desktop panoramic static image viewer concept (e.g., Apple QuickTime VR; IPIX) to support immersive real time viewing, so that an observer wearing a head-mounted display can make free head movements while viewing dynamic scenes rendered in real time stereo using video data obtained from a set of fixed cameras. Computational experiments by Seitz and others have demonstrated the feasibility of morphing image pairs to render stereo scenes from novel, virtual viewpoints. The user can interact both with morphed real world video images, and supplementary artificial virtual objects (“Augmented Reality”). The inherent congruence of the real and artificial coordinate frames of this system reduces registration errors commonly found in Augmented Reality applications. In addition, the user’s eyepoint is computed locally so that any scene lag resulting from head movement will be less than those from alternative technologies using remotely controlled ground cameras. For space applications, this can significantly reduce the apparent lag due to satellite communication delay. This hybrid VR/view-morphing display (“Virtual Video”) has many important NASA applications including remote teleoperation, crew onboard training, private family and medical teleconferencing, and telemedicine. The technical objective of this study developed a proof-of-concept system using a 3D graphics PC workstation of one of the component technologies, Immersive Omnidirectional Video, of Virtual Video. The management goal identified a system process for planning, managing, and tracking the integration, test and validation of this phased, 3-year multi-university research and development program.by William E. Hutchison.S.M

Terahertz Technology and Its Applications

The Terahertz frequency range (0.1 – 10)THz has demonstrated to provide many opportunities in prominent research fields such as high-speed communications, biomedicine, sensing, and imaging. This spectral range, lying between electronics and photonics, has been historically known as “terahertz gap” because of the lack of experimental as well as fabrication technologies. However, many efforts are now being carried out worldwide in order improve technology working at this frequency range. This book represents a mechanism to highlight some of the work being done within this range of the electromagnetic spectrum. The topics covered include non-destructive testing, teraherz imaging and sensing, among others

NASA Tech Briefs, September 2010

Topics covered include: Instrument for Measuring Thermal Conductivity of Materials at Low Temperatures; Multi-Axis Accelerometer Calibration System; Pupil Alignment Measuring Technique and Alignment Reference for Instruments or Optical Systems; Autonomous System for Monitoring the Integrity of Composite Fan Housings; A Safe, Self-Calibrating, Wireless System for Measuring Volume of Any Fuel at Non-Horizontal Orientation; Adaptation of the Camera Link Interface for Flight-Instrument Applications; High-Performance CCSDS Encapsulation Service Implementation in FPGA; High-Performance CCSDS AOS Protocol Implementation in FPGA; Advanced Flip Chips in Extreme Temperature Environments; Diffuse-Illumination Systems for Growing Plants; Microwave Plasma Hydrogen Recovery System; Producing Hydrogen by Plasma Pyrolysis of Methane; Self-Deployable Membrane Structures; Reactivation of a Tin-Oxide-Containing Catalys; Functionalization of Single-Wall Carbon Nanotubes by Photo-Oxidation; Miniature Piezoelectric Macro-Mass Balance; Acoustic Liner for Turbomachinery Applications; Metering Gas Strut for Separating Rocket Stages; Large-Flow-Area Flow-Selective Liquid/Gas Separator; Counterflowing Jet Subsystem Design; Water Tank with Capillary Air/Liquid Separation; True Shear Parallel Plate Viscometer; Focusing Diffraction Grating Element with Aberration Control; Universal Millimeter-Wave Radar Front End; Mode Selection for a Single-Frequency Fiber Laser; Qualification and Selection of Flight Diode Lasers for Space Applications; Plenoptic Imager for Automated Surface Navigation; Maglev Facility for Simulating Variable Gravity; Hybrid AlGaN-SiC Avalanche Photodiode for Deep-UV Photon Detection; High-Speed Operation of Interband Cascade Lasers; 3D GeoWall Analysis System for Shuttle External Tank Foreign Object Debris Events; Charge-Spot Model for Electrostatic Forces in Simulation of Fine Particulates; Hidden Statistics Approach to Quantum Simulations; Reconstituted Three-Dimensional Interactive Imaging; Determining Atmospheric-Density Profile of Titan; Digital Microfluidics Sample Analyzer; Radiation Protection Using Carbon Nanotube Derivatives; Process to Selectively Distinguish Viable from Non-Viable Bacterial Cells; and TEAMS Model Analyzer

3D Recording and Interpretation for Maritime Archaeology

This open access peer-reviewed volume was inspired by the UNESCO UNITWIN Network for Underwater Archaeology International Workshop held at Flinders University, Adelaide, Australia in November 2016. Content is based on, but not limited to, the work presented at the workshop which was dedicated to 3D recording and interpretation for maritime archaeology. The volume consists of contributions from leading international experts as well as up-and-coming early career researchers from around the globe. The content of the book includes recording and analysis of maritime archaeology through emerging technologies, including both practical and theoretical contributions. Topics include photogrammetric recording, laser scanning, marine geophysical 3D survey techniques, virtual reality, 3D modelling and reconstruction, data integration and Geographic Information Systems. The principal incentive for this publication is the ongoing rapid shift in the methodologies of maritime archaeology within recent years and a marked increase in the use of 3D and digital approaches. This convergence of digital technologies such as underwater photography and photogrammetry, 3D sonar, 3D virtual reality, and 3D printing has highlighted a pressing need for these new methodologies to be considered together, both in terms of defining the state-of-the-art and for consideration of future directions. As a scholarly publication, the audience for the book includes students and researchers, as well as professionals working in various aspects of archaeology, heritage management, education, museums, and public policy. It will be of special interest to those working in the field of coastal cultural resource management and underwater archaeology but will also be of broader interest to anyone interested in archaeology and to those in other disciplines who are now engaging with 3D recording and visualization