Heuristic Solution to Protect Communications in WDM Networks using P-cycles

Optical WDM mesh networks are able to transport huge amount of information. The use of such technology however poses the problem of protection against failures such as fibre cuts. One of the principal methods for link protection used in optical WDM networks is pre-configured protection cycle (p-cycle). The major problem of this method of protection resides in finding the optimal set of p-cycles which protect the network for a given distribution of working capacity. Existing heuristics generate a large set of p-cycle candidates which are entirely independent of the network state, and from then the good sub-set of p-cycles which will protect the network is selected. In this paper, we propose a new algorithm of generation of p-cycles based on the incremental aggregation of the shortest cycles. Our generation of p-cycles depends on the state of the network. This enables us to choose an efficient set of p-cycles which will protect the network. The set of p-cycles that we generate is the final set which will protect the network, in other words our heuristic does not go through the additional step of p-cycle selectio

Design of survivable WDM network based on pre-configured protection cycle

Wavelength Division Multiplexing (WDM) is an important technique which allows the trans- port of large quantities of data over optical networks. All optical WDM-based networks have been used to improve overall communication capacity and provide an excellent choice for the design of backbone networks. However, due to the high traffic load that each link can carry in a WDM network, survivability against failures becomes very important. Survivability in this context is the ability of the network to maintain continuity of service against failures, since a failure can lead to huge data losses. In recent years, many survivability mechanisms have been studied and their performance assessed through capacity efficiency, restoration time and restorability. Survivability mechanisms for ring and mesh topologies have received particular attention

Optimal Algorithms for Near-Hitless Network Restoration via Diversity Coding

Diversity coding is a network restoration technique which offers near-hitless restoration, while other state-of-the art techniques are significantly slower. Furthermore, the extra spare capacity requirement of diversity coding is competitive with the others. Previously, we developed heuristic algorithms to employ diversity coding structures in networks with arbitrary topology. This paper presents two algorithms to solve the network design problems using diversity coding in an optimal manner. The first technique pre-provisions static traffic whereas the second technique carries out the dynamic provisioning of the traffic on-demand. In both cases, diversity coding results in smaller restoration time, simpler synchronization, and much reduced signaling complexity than the existing techniques in the literature. A Mixed Integer Programming (MIP) formulation and an algorithm based on Integer Linear Programming (ILP) are developed for pre-provisioning and dynamic provisioning, respectively. Simulation results indicate that diversity coding has significantly higher restoration speed than Shared Path Protection (SPP) and p-cycle techniques. It requires more extra capacity than the p-cycle technique and SPP. However, the increase in the total capacity is negligible compared to the increase in the restoration speed.Comment: An old version of this paper is submitted to IEEE Globecom 2012 conferenc

Constellation Shaping for WDM systems using 256QAM/1024QAM with Probabilistic Optimization

In this paper, probabilistic shaping is numerically and experimentally investigated for increasing the transmission reach of wavelength division multiplexed (WDM) optical communication system employing quadrature amplitude modulation (QAM). An optimized probability mass function (PMF) of the QAM symbols is first found from a modified Blahut-Arimoto algorithm for the optical channel. A turbo coded bit interleaved coded modulation system is then applied, which relies on many-to-one labeling to achieve the desired PMF, thereby achieving shaping gain. Pilot symbols at rate at most 2% are used for synchronization and equalization, making it possible to receive input constellations as large as 1024QAM. The system is evaluated experimentally on a 10 GBaud, 5 channels WDM setup. The maximum system reach is increased w.r.t. standard 1024QAM by 20% at input data rate of 4.65 bits/symbol and up to 75% at 5.46 bits/symbol. It is shown that rate adaptation does not require changing of the modulation format. The performance of the proposed 1024QAM shaped system is validated on all 5 channels of the WDM signal for selected distances and rates. Finally, it was shown via EXIT charts and BER analysis that iterative demapping, while generally beneficial to the system, is not a requirement for achieving the shaping gain.Comment: 10 pages, 12 figures, Journal of Lightwave Technology, 201

Protection and restoration algorithms for WDM optical networks

Currently, Wavelength Division Multiplexing (WDM) optical networks play a major role in supporting the outbreak in demand for high bandwidth networks driven by the Internet. It can be a catastrophe to millions of users if a single optical fiber is somehow cut off from the network, and there is no protection in the design of the logical topology for a restorative mechanism. Many protection and restoration algorithms are needed to prevent, reroute, and/or reconfigure the network from damages in such a situation. In the past few years, many works dealing with these issues have been reported. Those algorithms can be implemented in many ways with several different objective functions such as a minimization of protection path lengths, a minimization of restoration times, a maximization of restored bandwidths, etc. This thesis investigates, analyzes and compares the algorithms that are mainly aimed to guarantee or maximize the amount of remaining bandwidth still working over a damaged network. The parameters considered in this thesis are the routing computation and implementation mechanism, routing characteristics, recovering computation timing, network capacity assignment, and implementing layer. Performance analysis in terms of the restoration efficiency, the hop length, the percentage of bandwidth guaranteed, the network capacity utilization, and the blocking probability is conducted and evaluated

Efficient p-Cycle Design by Heuristic p-Cycle Selection and Refinement for Servivable WDM Mesh Networks

Using p-Cycles to protect against single span failures in Wavelength-Division Multiplexing (WDM) networks has been widely studied. p-Cycle retains not only the speed of ring-like restoration, but also achieves the capacity efficiency over mesh networks. However, in selecting an optimal set of p-cycles to achieve the minimum spare capacity and fast computational time is an NP-hard problem. To address this issue, we propose a heuristic approach to iteratively select and refine a set of p-cycles, which contains two algorithms: the Heuristic p-Cycle Selection (HPS) algorithm, and the Refine Selected Cycles (RSC) algorithm. Our simulation results show that the proposed approach is within 3.5% redundancy difference from the optimal solution with very fast computation time even for large networks

Sub-Graph p-cycle formation for span failures in all-Optical Networks

p-Cycles offer ring-like switching speed and mesh-like spare capacity efficiency for protecting network against link failures. This makes them extremely efficient and effective protection technique. p-Cycles can also protect all the links in a network against simultaneous failures of multiple links. But it has been mostly studied for single link failure scenarios in the networks with the objective to minimize spare capacity under the condition of100% restorability. For large networks, use of p-cycles is difficult because their optimization requires an excessive amount of time as the number of variables in the corresponding Integer Linear Program (ILP) increase with the increase in the network size. In a real-time network situation,setting up a highly efficient protection in a short time is essential.Thus, we introduce a network sub-graphing approach, in which a network is segmented into smaller parts based on certain network attributes. Then, an optimal solution is found for each sub-graph. Finally, the solutions for all the sub-graphs is combined to get a sub-optimal solution for the whole network. We achieved better computational efficiency at the expense of marginal spare capacity increases with this approach