On Power Allocation for Distributed Detection with Correlated Observations and Linear Fusion

We consider a binary hypothesis testing problem in an inhomogeneous wireless sensor network, where a fusion center (FC) makes a global decision on the underlying hypothesis. We assume sensors observations are correlated Gaussian and sensors are unaware of this correlation when making decisions. Sensors send their modulated decisions over fading channels, subject to individual and/or total transmit power constraints. For parallel-access channel (PAC) and multiple-access channel (MAC) models, we derive modified deflection coefficient (MDC) of the test statistic at the FC with coherent reception.We propose a transmit power allocation scheme, which maximizes MDC of the test statistic, under three different sets of transmit power constraints: total power constraint, individual and total power constraints, individual power constraints only. When analytical solutions to our constrained optimization problems are elusive, we discuss how these problems can be converted to convex ones. We study how correlation among sensors observations, reliability of local decisions, communication channel model and channel qualities and transmit power constraints affect the reliability of the global decision and power allocation of inhomogeneous sensors

Estimation Diversity and Energy Efficiency in Distributed Sensing

Distributed estimation based on measurements from multiple wireless sensors is investigated. It is assumed that a group of sensors observe the same quantity in independent additive observation noises with possibly different variances. The observations are transmitted using amplify-and-forward (analog) transmissions over non-ideal fading wireless channels from the sensors to a fusion center, where they are combined to generate an estimate of the observed quantity. Assuming that the Best Linear Unbiased Estimator (BLUE) is used by the fusion center, the equal-power transmission strategy is first discussed, where the system performance is analyzed by introducing the concept of estimation outage and estimation diversity, and it is shown that there is an achievable diversity gain on the order of the number of sensors. The optimal power allocation strategies are then considered for two cases: minimum distortion under power constraints; and minimum power under distortion constraints. In the first case, it is shown that by turning off bad sensors, i.e., sensors with bad channels and bad observation quality, adaptive power gain can be achieved without sacrificing diversity gain. Here, the adaptive power gain is similar to the array gain achieved in Multiple-Input Single-Output (MISO) multi-antenna systems when channel conditions are known to the transmitter. In the second case, the sum power is minimized under zero-outage estimation distortion constraint, and some related energy efficiency issues in sensor networks are discussed.Comment: To appear at IEEE Transactions on Signal Processin

Rician MIMO Channel- and Jamming-Aware Decision Fusion

In this manuscript we study channel-aware decision fusion (DF) in a wireless sensor network (WSN) where: (i) the sensors transmit their decisions simultaneously for spectral efficiency purposes and the DF center (DFC) is equipped with multiple antennas; (ii) each sensor-DFC channel is described via a Rician model. As opposed to the existing literature, in order to account for stringent energy constraints in the WSN, only statistical channel information is assumed for the non-line-of sight (scattered) fading terms. For such a scenario, sub-optimal fusion rules are developed in order to deal with the exponential complexity of the likelihood ratio test (LRT) and impractical (complete) system knowledge. Furthermore, the considered model is extended to the case of (partially unknown) jamming-originated interference. Then the obtained fusion rules are modified with the use of composite hypothesis testing framework and generalized LRT. Coincidence and statistical equivalence among them are also investigated under some relevant simplified scenarios. Numerical results compare the proposed rules and highlight their jammingsuppression capability.Comment: Accepted in IEEE Transactions on Signal Processing 201

Distributed Detection and Estimation in Wireless Sensor Networks

Wireless sensor networks (WSNs) are typically formed by a large number of densely deployed, spatially distributed sensors with limited sensing, computing, and communication capabilities that cooperate with each other to achieve a common goal. In this dissertation, we investigate the problem of distributed detection, classification, estimation, and localization in WSNs. In this context, the sensors observe the conditions of their surrounding environment, locally process their noisy observations, and send the processed data to a central entity, known as the fusion center (FC), through parallel communication channels corrupted by fading and additive noise. The FC will then combine the received information from the sensors to make a global inference about the underlying phenomenon, which can be either the detection or classification of a discrete variable or the estimation of a continuous one.;In the domain of distributed detection and classification, we propose a novel scheme that enables the FC to make a multi-hypothesis classification of an underlying hypothesis using only binary detections of spatially distributed sensors. This goal is achieved by exploiting the relationship between the influence fields characterizing different hypotheses and the accumulated noisy versions of local binary decisions as received by the FC, where the influence field of a hypothesis is defined as the spatial region in its surrounding in which it can be sensed using some sensing modality. In the realm of distributed estimation and localization, we make four main contributions: (a) We first formulate a general framework that estimates a vector of parameters associated with a deterministic function using spatially distributed noisy samples of the function for both analog and digital local processing schemes. ( b) We consider the estimation of a scalar, random signal at the FC and derive an optimal power-allocation scheme that assigns the optimal local amplification gains to the sensors performing analog local processing. The objective of this optimized power allocation is to minimize the L 2-norm of the vector of local transmission powers, given a maximum estimation distortion at the FC. We also propose a variant of this scheme that uses a limited-feedback strategy to eliminate the requirement of perfect feedback of the instantaneous channel fading coefficients from the FC to local sensors through infinite-rate, error-free links. ( c) We propose a linear spatial collaboration scheme in which sensors collaborate with each other by sharing their local noisy observations. We derive the optimal set of coefficients used to form linear combinations of the shared noisy observations at local sensors to minimize the total estimation distortion at the FC, given a constraint on the maximum average cumulative transmission power in the entire network. (d) Using a novel performance measure called the estimation outage, we analyze the effects of the spatial randomness of the location of the sensors on the quality and performance of localization algorithms by considering an energy-based source-localization scheme under the assumption that the sensors are positioned according to a uniform clustering process

Damage identification in structural health monitoring: a brief review from its implementation to the Use of data-driven applications

The damage identification process provides relevant information about the current state of a structure under inspection, and it can be approached from two different points of view. The first approach uses data-driven algorithms, which are usually associated with the collection of data using sensors. Data are subsequently processed and analyzed. The second approach uses models to analyze information about the structure. In the latter case, the overall performance of the approach is associated with the accuracy of the model and the information that is used to define it. Although both approaches are widely used, data-driven algorithms are preferred in most cases because they afford the ability to analyze data acquired from sensors and to provide a real-time solution for decision making; however, these approaches involve high-performance processors due to the high computational cost. As a contribution to the researchers working with data-driven algorithms and applications, this work presents a brief review of data-driven algorithms for damage identification in structural health-monitoring applications. This review covers damage detection, localization, classification, extension, and prognosis, as well as the development of smart structures. The literature is systematically reviewed according to the natural steps of a structural health-monitoring system. This review also includes information on the types of sensors used as well as on the development of data-driven algorithms for damage identification.Peer ReviewedPostprint (published version

Distributed detection and estimation in wireless sensor networks: resource allocation, fusion rules, and network security

This thesis addresses the problem of detection of an unknown binary event. In particular, we consider centralized detection, distributed detection, and network security in wireless sensor networks (WSNs). The communication links among SNs are subject to limited SN transmit power, limited bandwidth (BW), and are modeled as orthogonal channels with path loss, flat fading and additive white Gaussian noise (AWGN). We propose algorithms for resource allocations, fusion rules, and network security. In the first part of this thesis, we consider the centralized detection and calculate the optimal transmit power allocation and the optimal number of quantization bits for each SN. The resource allocation is performed at the fusion center (FC) and it is referred as a centralized approach. We also propose a novel fully $distributed$ algorithm to address this resource allocation problem. What makes this scheme attractive is that the SNs share with their neighbors just their individual transmit power at the current states. Finally, the optimal soft fusion rule at the FC is derived. But as this rule requires a-priori knowledge that is difficult to attain in practice, suboptimal fusion rules are proposed that are realizable in practice. The second part considers a fully distributed detection framework and we propose a two-step distributed quantized fusion rule algorithm where in the first step the SNs collaborate with their neighbors through error-free, orthogonal channels. In the second step, local 1-bit decisions generated in the first step are shared among neighbors to yield a consensus. A binary hypothesis testing is performed at any arbitrary SN to optimally declare the global decision. Simulations show that our proposed quantized two-step distributed detection algorithm approaches the performance of the unquantized centralized (with a FC) detector and its power consumption is shown to be 50% less than the existing (unquantized) conventional algorithm. Finally, we analyze the detection performance of under-attack WSNs and derive attacking and defense strategies from both the Attacker and the FC perspective. We re-cast the problem as a minimax game between the FC and Attacker and show that the Nash Equilibrium (NE) exists. We also propose a new non-complex and efficient reputation-based scheme to identify these compromised SNs. Based on this reputation metric, we propose a novel FC weight computation strategy ensuring that the weights for the identified compromised SNs are likely to be decreased. In this way, the FC decides how much a SN should contribute to its final decision. We show that this strategy outperforms the existing schemes

Energy-driven techniques for massive machine-type communications

In the last few years, a lot of effort has been put into the development of the fifth generation of cellular networks (5G). Given the vast heterogeneity of devices coexisting in these networks, new approaches have been sought to meet all requirements (e.g., data rate, coverage, delay, etc.). Within that framework, massive machine-type communications (mMTC) emerge as a promising candidate to enable many Internet of Things applications. mMTC define a type of systems where large sets of simple and battery-constrained devices transmit short data packets simultaneously. Unlike other 5G use cases, in mMTC, a low cost and power consumption are extensively pursued. Due to these specifications, typical humantype communications (HTC) solutions fail in providing a good service. In this dissertation, we focus on the design of energy-driven techniques for extending the lifetime of mMTC terminals. Both uplink (UL) and downlink (DL) stages are addressed, with special attention to the traffic models and spatial distribution of the devices. More specifically, we analyze a setup where groups of randomly deployed sensors send their (possibly correlated) observations to a collector node using different multiple access schemes. Depending on their activity, information might be transmitted either on a regular or sporadic basis. In that sense, we explore resource allocation, data compression, and device selection strategies to reduce the energy consumption in the UL. To further improve the system performance, we also study medium access control protocols and interference management techniques that take into account the large connectivity in these networks. On the contrary, in the DL, we concentrate on the support of wireless powered networks through different types of energy supply mechanisms, for which proper transmission schemes are derived. Additionally, for a better representation of current 5G deployments, the presence of HTC terminals is also included. Finally, to evaluate our proposals, we present several numerical simulations following standard guidelines. In line with that, we also compare our approaches with state-of-the-art solutions. Overall, results show that the power consumption in the UL can be reduced with still good performance and that the battery lifetimes can be improved thanks to the DL strategies.En els últims anys, s'han dedicat molts esforços al desenvolupament de la cinquena generació de telefonia mòbil (5G). Donada la gran heterogeneïtat de dispositius coexistint en aquestes xarxes, s'han buscat nous mètodes per satisfer tots els requisits (velocitat de dades, cobertura, retard, etc.). En aquest marc, les massive machine-type communications (mMTC) sorgeixen com a candidates prometedores per fer possible moltes aplicacions del Internet of Things. Les mMTC defineixen un tipus de sistemes en els quals grans conjunts de dispositius senzills i amb poca bateria, transmeten simultàniament paquets de dades curts. A diferència d'altres casos d'ús del 5G, en mMTC es persegueix un cost i un consum d'energia baixos. A causa d'aquestes especificacions, les solucions típiques de les human-type communications (HTC) no aconsegueixen proporcionar un bon servei. En aquesta tesi, ens centrem en el disseny de tècniques basades en l'energia per allargar la vida útil dels terminals mMTC. S'aborden tant les etapes del uplink (UL) com les del downlink (DL), amb especial atenció als models de trànsit i a la distribució espacial dels dispositius. Més concretament, analitzem un escenari en el qual grups de sensors desplegats aleatòriament, envien les seves observacions (possiblement correlades) a un node col·lector utilitzant diferents esquemes d'accés múltiple. Depenent de la seva activitat, la informació es pot transmetre de manera regular o esporàdica. En aquest sentit, explorem estratègies d'assignació de recursos, compressió de dades, i selecció de dispositius per reduir el consum d'energia en el UL. Per millorar encara més el rendiment del sistema, també estudiem protocols de control d'accés al medi i tècniques de gestió d'interferències que tinguin en compte la gran connectivitat d'aquestes xarxes. Per contra, en el DL, ens centrem en el suport de les wireless powered networks mitjançant diferents mecanismes de subministrament d'energia, per als quals es deriven esquemes de transmissió adequats. A més, per una millor representació dels desplegaments 5G actuals, també s'inclou la presència de terminals HTC. Finalment, per avaluar les nostres propostes, presentem diverses simulacions numèriques seguint pautes estandarditzades. En aquesta línia, també comparem els nostres enfocaments amb les solucions de l'estat de l'art. En general, els resultats mostren que el consum d'energia en el UL pot reduir-se amb un bon rendiment i que la durada de la bateria pot millorar-se gràcies a les estratègies del DL.En los últimos años, se han dedicado muchos esfuerzos al desarrollo de la quinta generación de telefonía móvil (5G). Dada la gran heterogeneidad de dispositivos coexistiendo en estas redes, se han buscado nuevos métodos para satisfacer todos los requisitos (velocidad de datos, cobertura, retardo, etc.). En este marco, las massive machine-type communications (mMTC) surgen como candidatas prometedoras para hacer posible muchas aplicaciones del Internet of Things. Las mMTC definen un tipo de sistemas en los cuales grandes conjuntos de dispositivos sencillos y con poca batería, transmiten simultáneamente paquetes de datos cortos. A diferencia de otros casos de uso del 5G, en mMTC se persigue un coste y un consumo de energía bajos. A causa de estas especificaciones, las soluciones típicas de las human-type communications (HTC) no consiguen proporcionar un buen servicio. En esta tesis, nos centramos en el diseño de técnicas basadas en la energía para alargar la vida ´útil de los terminales mMTC. Se abordan tanto las etapas del uplink (UL) como las del downlink (DL), con especial atención a los modelos de tráfico y a la distribución espacial de los dispositivos. Más concretamente, analizamos un escenario en el cual grupos de sensores desplegados aleatoriamente, envían sus observaciones (posiblemente correladas) a un nodo colector utilizando diferentes esquemas de acceso múltiple. Dependiendo de su actividad, la información se puede transmitir de manera regular o esporádica. En este sentido, exploramos estrategias de asignación de recursos, compresión de datos, y selección de dispositivos para reducir el consumo de energía en el UL. Para mejorar todavía más el rendimiento del sistema, también estudiamos protocolos de control de acceso al medio y técnicas de gestión de interferencias que tengan en cuenta la gran conectividad de estas redes. Por el contrario, en el DL, nos centramos en el soporte de las wireless powered networks mediante diferentes mecanismos de suministro de energía, para los cuales se derivan esquemas de transmisión adecuados. Además, para una mejor representación de los despliegues 5G actuales, también se incluye la presencia de terminales HTC. Finalmente, para evaluar nuestras propuestas, presentamos varias simulaciones numéricas siguiendo pautas estandarizadas. En esta línea, también comparamos nuestros enfoques con las soluciones del estado del arte. En general, los resultados muestran que el consumo de energía en el UL puede reducirse con un buen rendimiento y que la duración de la batería puede mejorarse gracias a las estrategias del DLPostprint (published version