Near-optimal broadcast in all-port wormhole-routed hypercubes using error-correcting codes

A new broadcasting method is presented for hypercubes with wormhole routing mechanism. The communication model assumed allows an n-dimensional hypercube to have at most n concurrent I/O communication along its ports. It assumes a distance insensitivity of (n + 1) with no intermediate reception capability for the nodes. The approach is based on determination of the set of nodes called stations in the hypercube. Once stations are identified, node disjoint paths are formed from the source to all stations. The broadcasting is accomplished first by sending the message to all stations, which will inform the rest of the nodes. To establish node-disjoint paths between the source node and all stations, we introduce a new routing strategy. We prove that multicasting can be done in one routing step as long as the number of destination nodes are at most n in an n-dimensional hypercube. The number of broadcasting steps using our routing is equal to or smaller than that obtained in an earlier work; this number is optimal for all hypercube dimensions n ≤ 12, except for n = 10

Parallel Architectures for Planetary Exploration Requirements (PAPER)

The Parallel Architectures for Planetary Exploration Requirements (PAPER) project is essentially research oriented towards technology insertion issues for NASA's unmanned planetary probes. It was initiated to complement and augment the long-term efforts for space exploration with particular reference to NASA/LaRC's (NASA Langley Research Center) research needs for planetary exploration missions of the mid and late 1990s. The requirements for space missions as given in the somewhat dated Advanced Information Processing Systems (AIPS) requirements document are contrasted with the new requirements from JPL/Caltech involving sensor data capture and scene analysis. It is shown that more stringent requirements have arisen as a result of technological advancements. Two possible architectures, the AIPS Proof of Concept (POC) configuration and the MAX Fault-tolerant dataflow multiprocessor, were evaluated. The main observation was that the AIPS design is biased towards fault tolerance and may not be an ideal architecture for planetary and deep space probes due to high cost and complexity. The MAX concepts appears to be a promising candidate, except that more detailed information is required. The feasibility for adding neural computation capability to this architecture needs to be studied. Key impact issues for architectural design of computing systems meant for planetary missions were also identified

General broadcasting algorithms in one-port wormhole routed hypercubes

Wormhole routing has been accepted as an efficient switching mechanism in point-to-point interconnection networks. Here the network resource, i.e. node buffers and communication channels, are effectively utilized to deliver message across the network; We consider the problem of broadcasting a message in the hypercue equipped with the wormhole switching mechanism. The model is a generalization of an earlier work and considers a broadcast path-length of {dollar}m\ (1\leq m\leq n{dollar}) in the n-cube with a single-port communication capability. In this thesis, the scheme of e-cube and a Gray code path routing and intermediate reception capability have been adopted in order to solve the problem of broadcasting in one-port wormhole routed hypercubes. Two methods have been suggested; one is based on utilizing the Gray codes (Gray code path-based routing), while the other is based on the recursive partitioning of the cube (cube-based routing). The number of routing steps in both methods are compared to those in the previous results, as well as to the lower bounds derived based on the path-length m assumption. A cube-based and a path-based algorithm give {dollar}T(R)+(k\sb{c}+1)T(m){dollar} and {dollar}k\sb{G} +T(m){dollar} routing steps, respectively. By comparison with routing steps of both algorithms, the performance of the path-based algorithm shows better than that of the cube-based; The results of this work are significant and can be used for immediate implementation in contemporary machines most of which are equipped with wormhole routing and serial communication capability

Load Redistribution on Hypercubes in the Presence of Faults

In this paper, we present load redistribution algorithms for hypercubes in the presence of faults. Our algorithms complete in low-order polynomial of the number of faulty nodes and exhibit excellent experimental performance. These algorithms are topology independent and can be applied to a wide variety of networks

Hypercube-Based Topologies With Incremental Link Redundancy.

Hypercube structures have received a great deal of attention due to the attractive properties inherent to their topology. Parallel algorithms targeted at this topology can be partitioned into many tasks, each of which running on one node processor. A high degree of performance is achievable by running every task individually and concurrently on each node processor available in the hypercube. Nevertheless, the performance can be greatly degraded if the node processors spend much time just communicating with one another. The goal in designing hypercubes is, therefore, to achieve a high ratio of computation time to communication time. The dissertation addresses primarily ways to enhance system performance by minimizing the communication time among processors. The need for improving the performance of hypercube networks is clearly explained. Three novel topologies related to hypercubes with improved performance are proposed and analyzed. Firstly, the Bridged Hypercube (BHC) is introduced. It is shown that this design is remarkably more efficient and cost-effective than the standard hypercube due to its low diameter. Basic routing algorithms such as one to one and broadcasting are developed for the BHC and proven optimal. Shortcomings of the BHC such as its asymmetry and limited application are clearly discussed. The Folded Hypercube (FHC), a symmetric network with low diameter and low degree of the node, is introduced. This new topology is shown to support highly efficient communications among the processors. For the FHC, optimal routing algorithms are developed and proven to be remarkably more efficient than those of the conventional hypercube. For both BHC and FHC, network parameters such as average distance, message traffic density, and communication delay are derived and comparatively analyzed. Lastly, to enhance the fault tolerance of the hypercube, a new design called Fault Tolerant Hypercube (FTH) is proposed. The FTH is shown to exhibit a graceful degradation in performance with the existence of faults. Probabilistic models based on Markov chain are employed to characterize the fault tolerance of the FTH. The results are verified by Monte Carlo simulation. The most attractive feature of all new topologies is the asymptotically zero overhead associated with them. The designs are simple and implementable. These designs can lead themselves to many parallel processing applications requiring high degree of performance

Parallelizing Timed Petri Net simulations

The possibility of using parallel processing to accelerate the simulation of Timed Petri Nets (TPN's) was studied. It was recognized that complex system development tools often transform system descriptions into TPN's or TPN-like models, which are then simulated to obtain information about system behavior. Viewed this way, it was important that the parallelization of TPN's be as automatic as possible, to admit the possibility of the parallelization being embedded in the system design tool. Later years of the grant were devoted to examining the problem of joint performance and reliability analysis, to explore whether both types of analysis could be accomplished within a single framework. In this final report, the results of our studies are summarized. We believe that the problem of parallelizing TPN's automatically for MIMD architectures has been almost completely solved for a large and important class of problems. Our initial investigations into joint performance/reliability analysis are two-fold; it was shown that Monte Carlo simulation, with importance sampling, offers promise of joint analysis in the context of a single tool, and methods for the parallel simulation of general Continuous Time Markov Chains, a model framework within which joint performance/reliability models can be cast, were developed. However, very much more work is needed to determine the scope and generality of these approaches. The results obtained in our two studies, future directions for this type of work, and a list of publications are included

LIPIcs, Volume 251, ITCS 2023, Complete Volume

LIPIcs, Volume 251, ITCS 2023, Complete Volum