Energy Efficient and Reliable Wireless Sensor Networks - An Extension to IEEE 802.15.4e

Collecting sensor data in industrial environments from up to some tenth of battery powered sensor nodes with sampling rates up to 100Hz requires energy aware protocols, which avoid collisions and long listening phases. The IEEE 802.15.4 standard focuses on energy aware wireless sensor networks (WSNs) and the Task Group 4e has published an amendment to fulfill up to 100 sensor value transmissions per second per sensor node (Low Latency Deterministic Network (LLDN) mode) to satisfy demands of factory automation. To improve the reliability of the data collection in the star topology of the LLDN mode, we propose a relay strategy, which can be performed within the LLDN schedule. Furthermore we propose an extension of the star topology to collect data from two-hop sensor nodes. The proposed Retransmission Mode enables power savings in the sensor node of more than 33%, while reducing the packet loss by up to 50%. To reach this performance, an optimum spatial distribution is necessary, which is discussed in detail

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

Green Cellular Networks: A Survey, Some Research Issues and Challenges

Energy efficiency in cellular networks is a growing concern for cellular operators to not only maintain profitability, but also to reduce the overall environment effects. This emerging trend of achieving energy efficiency in cellular networks is motivating the standardization authorities and network operators to continuously explore future technologies in order to bring improvements in the entire network infrastructure. In this article, we present a brief survey of methods to improve the power efficiency of cellular networks, explore some research issues and challenges and suggest some techniques to enable an energy efficient or "green" cellular network. Since base stations consume a maximum portion of the total energy used in a cellular system, we will first provide a comprehensive survey on techniques to obtain energy savings in base stations. Next, we discuss how heterogeneous network deployment based on micro, pico and femto-cells can be used to achieve this goal. Since cognitive radio and cooperative relaying are undisputed future technologies in this regard, we propose a research vision to make these technologies more energy efficient. Lastly, we explore some broader perspectives in realizing a "green" cellular network technologyComment: 16 pages, 5 figures, 2 table

A Markov Chain Approach to IEEE 802.11WLAN Performance Analysis

Wireless communication always attracts extensive research interest, as it is a core part of modern communication technology. During my PhD study, I have focused on two research areas of wireless communication: IEEE 802.11 network performance analysis, and wireless cooperative retransmission. The first part of this thesis focuses on IEEE 802.11 network performance analysis. Since IEEE 802.11 technology is the most popular wireless access technology, IEEE 802.11 network performance analysis is always an important research area. In this area, my work includes the development of three analytical models for various aspects of IEEE 802.11 network performance analysis. First, a two-dimensional Markov chain model is proposed for analysing the performance of IEEE 802.11e EDCA (Enhanced Distributed Channel Access). With this analytical model, the saturated throughput is obtained. Compared with the existing analytical models of EDCA, the proposed model includes more correct details of EDCA, and accordingly its results are more accurate. This better accuracy is also proved by the simulation study. Second, another two-dimensional Markov chain model is proposed for analysing the coexistence performance of IEEE 802.11 DCF (Distributed Coordination Function) and IEEE 802.11e EDCA wireless devices. The saturated throughput is obtained with the proposed analytical model. The simulation study verifies the proposed analytical model, and it shows that the channel access priority of DCF is similar to that of the best effort access category in EDCA in the coexistence environment. The final work in this area is a hierarchical Markov chain model for investigating the impact of data-rate switching on the performance of IEEE 802.11 DCF. With this analytical model，the saturated throughput can be obtained. The simulation study verifies the accuracy of the model and shows the impact of the data-rate switching under different network conditions. A series of threshold values for the channel condition as well as the number of stations are obtained to decide whether the data-rate switching should be active or not. The second part of this thesis focuses on wireless cooperative retransmission. In this thesis, two uncoordinated distributed wireless cooperative retransmission strategies for single-hop connection are presented. In the proposed strategies, each uncoordinated cooperative neighbour randomly decide whether it should transmit to help the frame delivery depending on some pre-calculated optimal transmission probabilities. In Strategy 1, the source only transmits once in the first slot, and only the neighbours are involved in the retransmission attempts in the subsequent slots. In Strategy 2, both the source and the neighbours participate in the retransmission attempts. Both strategies are first analysed with a simple memoryless channel model, and the results show the superior performance of Strategy 2. With the elementary results for the memoryless channel model, a more realistic two-state Markov fading channel model is used to investigate the performance of Strategy 2. The simulation study verifies the accuracy of our analysis and indicates the superior performance of Strategy 2 compared with the simple retransmission strategy and the traditional two-hop strategy

Efficient Retransmission QoS-Aware MAC Scheme in Wireless Sensor Networks

In this paper, an Efficient Retransmission Random Access Protocol (ERRAP) is designed that combines scheme of collision avoidance and energy management for low-cost, short-range wireless radios and low-energy sensor nodes applications. This protocol focuses on efficient Media Access Control (MAC) schemes to provide autonomous Quality of Service (QoS) to the sensor nodes in one-hop QoS retransmission group in WSNs where the source nodes do not have receiver circuits. These sensor nodes can only transmit data to a destination node, but cannot receive acknowledgement or control signals from the destination node. The proposed scheme ERRAP provides QoS to the nodes which work independently on predefined time by allowing them to transmit each packet an optimal number of times within a given period. Our simulation results demonstrate the superiority of ERRAP scheme which increases the delivery probability and reduces the energy consumption

A Game Theory based Contention Window Adjustment for IEEE 802.11 under Heavy Load

The 802.11 families are considered as the most applicable set of standards for Wireless Local Area Networks (WLANs) where nodes make access to the wireless media using random access techniques. In such networks, each node adjusts its contention window to the minimum size irrespective of the number of competing nodes, so in saturated mode and excessive number of nodes available, the network performance is reduced due to severe collision probability. A cooperative game is being proposed to adjust the users’ contention windows in improving the network throughput, delay and packet drop ratio under heavy traffic load circumstances. The system’s performance evaluated by simulations indicate some superiorities of the proposed method over 802.11-DCF (Distribute Coordinate Function)

Reliable machine-to-machine multicast services with multi-radio cooperative retransmissions

The final publication is available at Springer via http://dx.doi.org/10.1007/s11036-015-0575-6The 3GPP is working towards the definition of service requirements and technical solutions to provide support for energy-efficient Machine Type Communications (MTC) in the forthcoming generations of cellular networks. One of the envisioned solutions consists in applying group management policies to clusters of devices in order to reduce control signaling and improve upon energy efficiency, e.g., multicast Over-The-Air (OTA) firmware updates. In this paper, a Multi-Radio Cooperative Retransmission Scheme is proposed to efficiently carry out multicast transmissions in MTC networks, reducing both control signaling and improving energy-efficiency. The proposal can be executed in networks composed by devices equipped with multiple radio interfaces which enable them to connect to both a cellular access network, e.g., LTE, and a short-range MTC area network, e.g., Low-Power Wi-Fi or ZigBee, as foreseen by the MTC architecture defined by ETSI. The main idea is to carry out retransmissions over the M2M area network upon error in the main cellular link. This yields a reduction in both the traffic load over the cellular link and the energy consumption of the devices. Computer-based simulations with ns-3 have been conducted to analyze the performance of the proposed scheme in terms of energy consumption and assess its superior performance compared to non-cooperative retransmission schemes, thus validating its suitability for energy-constrained MTC applications.Peer ReviewedPostprint (author's final draft