Multi-objective Anti-swing Trajectory Planning of Double-pendulum Tower Crane Operations using Opposition-based Evolutionary Algorithm

Underactuated tower crane lifting requires time-energy optimal trajectories for the trolley/slew operations and reduction of the unactuated swings resulting from the trolley/jib motion. In scenarios involving non-negligible hook mass or long rig-cable, the hook-payload unit exhibits double-pendulum behaviour, making the problem highly challenging. This article introduces an offline multi-objective anti-swing trajectory planning module for a Computer-Aided Lift Planning (CALP) system of autonomous double-pendulum tower cranes, addressing all the transient state constraints. A set of auxiliary outputs are selected by methodically analyzing the payload swing dynamics and are used to prove the differential flatness property of the crane operations. The flat outputs are parameterized via suitable B\'{e}zier curves to formulate the multi-objective trajectory optimization problems in the flat output space. A novel multi-objective evolutionary algorithm called Collective Oppositional Generalized Differential Evolution 3 (CO-GDE3) is employed as the optimizer. To obtain faster convergence and better consistency in getting a wide range of good solutions, a new population initialization strategy is integrated into the conventional GDE3. The computationally efficient initialization method incorporates various concepts of computational opposition. Statistical comparisons based on trolley and slew operations verify the superiority of convergence and reliability of CO-GDE3 over the standard GDE3. Trolley and slew operations of a collision-free lifting path computed via the path planner of the CALP system are selected for a simulation study. The simulated trajectories demonstrate that the proposed planner can produce time-energy optimal solutions, keeping all the state variables within their respective limits and restricting the hook and payload swings.Comment: 14 pages, 14 figures, 6 table

An improved marine predators algorithm tuned data-driven multiple-node hormone regulation neuroendocrine-PID controller for multi-input–multi-output gantry crane system

Conventionally, researchers have favored the model-based control scheme for controlling gantry crane systems. However, this method necessitates a substantial investment of time and resources in order to develop an accurate mathematical model of the complex crane system. Recognizing this challenge, the current paper introduces a novel data-driven control scheme that relies exclusively on input and output data. Undertaking a couple of modifications to the conventional marine predators algorithm (MPA), random average marine predators algorithm (RAMPA) with tunable adaptive coefficient to control the step size ( CF) has been proposed in this paper as an enhanced alternative towards fine-tuning data-driven multiple-node hormone regulation neuroendocrine-PID (MnHR-NEPID) controller parameters for the multi-input–multi-output (MIMO) gantry crane system. First modification involved a random average location calculation within the algorithm’s updating mechanism to solve the local optima issue. The second modification then introduced tunable CF that enhanced search capacity by enabling users’ resilience towards attaining an offsetting level of exploration and exploitation phases. Effectiveness of the proposed method is evaluated based on the convergence curve and statistical analysis of the fitness function, the total norms of error and input, Wilcoxon’s rank test, time response analysis, and robustness analysis under the influence of external disturbance. Comparative findings alongside other existing metaheuristic-based algorithms confirmed excellence of the proposed method through its superior performance against the conventional MPA, particle swarm optimization (PSO), grey wolf optimizer (GWO), moth-flame optimization (MFO), multi-verse optimizer (MVO), sine-cosine algorithm (SCA), salp-swarm algorithm (SSA), slime mould algorithm (SMA), flow direction algorithm (FDA), and the formally published adaptive safe experimentation dynamics (ASED)-based methods

Development of Motion Control Systems for Hydraulically Actuated Cranes with Hanging Loads

Automation has been used in industrial processes for several decades to increase efficiency and safety. Tasks that are either dull, dangerous, or dirty can often be performed by machines in a reliable manner. This may provide a reduced risk to human life, and will typically give a lower economic cost. Industrial robots are a prime example of this, and have seen extensive use in the automotive industry and manufacturing plants. While these machines have been employed in a wide variety of industries, heavy duty lifting and handling equipment such as hydraulic cranes have typically been manually operated. This provides an opportunity to investigate and develop control systems to push lifting equipment towards the same level of automation found in the aforementioned industries. The use of winches and hanging loads on cranes give a set of challenges not typically found on robots, which requires careful consideration of both the safety aspect and precision of the pendulum-like motion. Another difference from industrial robots is the type of actuation systems used. While robots use electric motors, the cranes discussed in this thesis use hydraulic cylinders. As such, the dynamics of the machines and the control system designmay differ significantly. In addition, hydraulic cranes may experience significant deflection when lifting heavy loads, arising from both structural flexibility and the compressibility of the hydraulic fluid. The work presented in this thesis focuses on motion control of hydraulically actuated cranes. Motion control is an important topic when developing automation systems, as moving from one position to another is a common requirement for automated lifting operations. A novel path controller operating in actuator space is developed, which takes advantage of the load-independent flow control valves typically found on hydraulically actuated cranes. By operating in actuator space the motion of each cylinder is inherently minimized. To counteract the pendulum-like motion of the hanging payload, a novel anti-swing controller is developed and experimentally verified. The anti-swing controller is able to suppress the motion from the hanging load to increase safety and precision. To tackle the challenges associated with the flexibility of the crane, a deflection compensator is developed and experimentally verified. The deflection compensator is able to counteract both the static deflection due to gravity and dynamic de ection due to motion. Further, the topic of adaptive feedforward control of pressure compensated cylinders has been investigated. A novel adaptive differential controller has been developed and experimentally verified, which adapts to system uncertainties in both directions of motion. Finally, the use of electro-hydrostatic actuators for motion control of cranes has been investigated using numerical time domain simulations. A novel concept is proposed and investigated using simulations.publishedVersio

An improved marine predators algorithm tuned data-driven multiple-node hormone regulation neuroendocrine-PID controller for multi-input–multi-output gantry crane system

Conventionally, researchers have favored the model-based control scheme for controlling gantry crane systems. However, this method necessitates a substantial investment of time and resources in order to develop an accurate mathematical model of the complex crane system. Recognizing this challenge, the current paper introduces a novel data-driven control scheme that relies exclusively on input and output data. Undertaking a couple of modifications to the conventional marine predators algorithm (MPA), random average marine predators algorithm (RAMPA) with tunable adaptive coefficient to control the step size (CF) has been proposed in this paper as an enhanced alternative towards fine-tuning data-driven multiple-node hormone regulation neuroendocrine-PID (MnHR-NEPID) controller parameters for the multi-input–multi-output (MIMO) gantry crane system. First modification involved a random average location calculation within the algorithm’s updating mechanism to solve the local optima issue. The second modification then introduced tunable CF that enhanced search capacity by enabling users’ resilience towards attaining an offsetting level of exploration and exploitation phases. Effectiveness of the proposed method is evaluated based on the convergence curve and statistical analysis of the fitness function, the total norms of error and input, Wilcoxon’s rank test, time response analysis, and robustness analysis under the influence of external disturbance. Comparative findings alongside other existing metaheuristic-based algorithms confirmed excellence of the proposed method through its superior performance against the conventional MPA, particle swarm optimization (PSO), grey wolf optimizer (GWO), moth-flame optimization (MFO), multi-verse optimizer (MVO), sine-cosine algorithm (SCA), salp-swarm algorithm (SSA), slime mould algorithm (SMA), flow direction algorithm (FDA), and the formally published adaptive safe experimentation dynamics (ASED)-based methods

Bio-inspired robotic control in underactuation: principles for energy efficacy, dynamic compliance interactions and adaptability.

Biological systems achieve energy efficient and adaptive behaviours through extensive autologous and exogenous compliant interactions. Active dynamic compliances are created and enhanced from musculoskeletal system (joint-space) to external environment (task-space) amongst the underactuated motions. Underactuated systems with viscoelastic property are similar to these biological systems, in that their self-organisation and overall tasks must be achieved by coordinating the subsystems and dynamically interacting with the environment. One important question to raise is: How can we design control systems to achieve efficient locomotion, while adapt to dynamic conditions as the living systems do? In this thesis, a trajectory planning algorithm is developed for underactuated microrobotic systems with bio-inspired self-propulsion and viscoelastic property to achieve synchronized motion in an energy efficient, adaptive and analysable manner. The geometry of the state space of the systems is explicitly utilized, such that a synchronization of the generalized coordinates is achieved in terms of geometric relations along the desired motion trajectory. As a result, the internal dynamics complexity is sufficiently reduced, the dynamic couplings are explicitly characterised, and then the underactuated dynamics are projected onto a hyper-manifold. Following such a reduction and characterization, we arrive at mappings of system compliance and integrable second-order dynamics with the passive degrees of freedom. As such, the issue of trajectory planning is converted into convenient nonlinear geometric analysis and optimal trajectory parameterization. Solutions of the reduced dynamics and the geometric relations can be obtained through an optimal motion trajectory generator. Theoretical background of the proposed approach is presented with rigorous analysis and developed in detail for a particular example. Experimental studies are conducted to verify the effectiveness of the proposed method. Towards compliance interactions with the environment, accurate modelling or prediction of nonlinear friction forces is a nontrivial whilst challenging task. Frictional instabilities are typically required to be eliminated or compensated through efficiently designed controllers. In this work, a prediction and analysis framework is designed for the self-propelled vibro-driven system, whose locomotion greatly relies on the dynamic interactions with the nonlinear frictions. This thesis proposes a combined physics-based and analytical-based approach, in a manner that non-reversible characteristic for static friction, presliding as well as pure sliding regimes are revealed, and the frictional limit boundaries are identified. Nonlinear dynamic analysis and simulation results demonstrate good captions of experimentally observed frictional characteristics, quenching of friction-induced vibrations and satisfaction of energy requirements. The thesis also performs elaborative studies on trajectory tracking. Control schemes are designed and extended for a class of underactuated systems with concrete considerations on uncertainties and disturbances. They include a collocated partial feedback control scheme, and an adaptive variable structure control scheme with an elaborately designed auxiliary control variable. Generically, adaptive control schemes using neural networks are designed to ensure trajectory tracking. Theoretical background of these methods is presented with rigorous analysis and developed in detail for particular examples. The schemes promote the utilization of linear filters in the control input to improve the system robustness. Asymptotic stability and convergence of time-varying reference trajectories for the system dynamics are shown by means of Lyapunov synthesis

해양 작업 지원선의 자율 운항 및 설치 작업 지원을 위한 시뮬레이션 방법

학위논문 (박사)-- 서울대학교 대학원 : 공과대학 조선해양공학과, 2019. 2. 노명일.Autonomous ships have gained a huge amount of interest in recent years, like their counterparts on land{autonomous cars, because of their potential to significantly lower the cost of operation, attract seagoing professionals and increase transportation safety. Technologies developed for the autonomous ships have potential to notably reduce maritime accidents where 75% cases can be attributed to human error and a significant proportion of these are caused by fatigue and attention deficit. However, developing a high-level autonomous system which can operate in an unstructured and unpredictable environment is still a challenging task. When the autonomous ships are operating in the congested waterway with other manned or unmanned vessels, the collision avoidance algorithm is the crucial point in keeping the safety of both the own ship and any encountered ships. Instead of developing new traffic rules for the autonomous ships to avoid collisions with each other, autonomous ships are expected to follow the existing guidelines based on the International Regulations for Preventing Collisions at Sea (COLREGs). Furthermore, when using the crane on the autonomous ship to transfer and install subsea equipment to the seabed, the heave and swaying phenomenon of the subsea equipment at the end of flexible wire ropes makes its positioning at an exact position is very difficult. As a result, an Anti-Motion Control (AMC) system for the crane is necessary to ensure the successful installation operation. The autonomous ship is highly relying on the effectiveness of autonomous systems such as autonomous path following system, collision avoidance system, crane control system and so on. During the previous two decades, considerable attention has been paid to develop robust autonomous systems. However, several are facing challenges and it is worthwhile devoting much effort to this. First of all, the development and testing of the proposed control algorithms should be adapted across a variety of environmental conditions including wave, wind, and current. This is one of the challenges of this work aimed at creating an autonomous path following and collision avoidance system in the ship. Secondly, the collision avoidance system has to comply with the regulations and rules in developing an autonomous ship. Thirdly, AMC system with anti-sway abilities for a knuckle boom crane remains problems regarding its under-actuated mechanism. At last, the performance of the control system should be evaluated in advance of the operation to perform its function successfully. In particular, such performance analysis is often very costly and time-consuming, and realistic conditions are typically impossible to establish in a testing environment. Consequently, to address these issues, we proposed a simulation framework with the following scenarios, which including the autonomous navigation scenario and crane operation scenario. The research object of this study is an autonomous offshore support vessel (OSV), which provides support services to offshore oil and gas field development such as offshore drilling, pipe laying, and oil producing assets (production platforms and FPSOs) utilized in EP (Exploration Production) activities. Assume that the autonomous OSV confronts an urgent mission under the harsh environmental conditions: on the way to an imperative offshore construction site, the autonomous OSV has to avoid target ships while following a predefined path. When arriving at the construction site, it starts to install a piece of subsea equipment on the seabed. So what technologies are needed, what should be invested for ensuring the autonomous OSV could robustly kilometers from shore, and how can an autonomous OSV be made at least as safe as the conventional ship. In this dissertation, we focus on the above critical activities for answering the above questions. In the general context of the autonomous navigation and crane control problem, the objective of this dissertation is thus fivefold: • Developing a COLREGs-compliant collision avoidance system. • Building a robust path following and collision avoidance system which can handle the unknown and complicated environment. • Investigating an efficient multi-ship collision avoidance method enable it easy to extend. • Proposing a hardware-in-the-loop simulation environment for the AHC system. • Solving the anti-sway problem of the knuckle boom crane on an autonomous OSV. First of all, we propose a novel deep reinforcement learning (RL) algorithm to achieve effective and efficient capabilities of the path following and collision avoidance system. To perform and verify the proposed algorithm, we conducted simulations for an autonomous ship under unknown environmental disturbance iiito adjust its heading in real-time. A three-degree-of-freedom dynamic model of the autonomous ship was developed, and the Line-of-sight (LOS) guidance system was used to converge the autonomous ship to follow the predefined path. Then, a proximal policy optimization (PPO) algorithm was implemented on the problem. By applying the advanced deep RL method, in which the autonomous OSV learns the best behavior through repeated trials to determine a safe and economical avoidance behavior in various circumstances. The simulation results showed that the proposed algorithm has the capabilities to guarantee collision avoidance of moving encountered ships while ensuring following a predefined path. Also, the algorithm demonstrated that it could manage complex scenarios with various encountered ships in compliance with COLREGs and have the excellent adaptability to the unknown, sophisticated environment. Next, the AMC system includes Anti-Heave Control (AHC) and Anti-Sway Control (ASC), which is applied to install subsea equipment in regular and irregular for performance analysis. We used the proportional-integral-derivative (PID) control method and the sliding mode control method respectively to achieve the control objective. The simulation results show that heave and sway motion could be significantly reduced by the proposed control methods during the construction. Moreover, to evaluate the proposed control system, we have constructed the HILS environment for the AHC system, then conducted a performance analysis of it. The simulation results show the AHC system could be evaluated effectively within the HILS environment. We can conclude that the proposed or adopted methods solve the problems issued in autonomous system design.해양 작업 지원선 (Offshore Support Vessel: OSV)의 경우 극한의 환경에도 불구하고 출항하여 해상에서 작업을 수행해야 하는 경우가 있다. 이러한 위험에의 노출을 최소화하기 위해 자율 운항에 대한 요구가 증가하고 있다. 여기서의 자율 운항은 선박이 출발지에서 목적지까지 사람의 도움 없이 이동함을 의미한다. 자율 운항 방법은 경로 추종 방법과 충돌 회피 방법을 포함한다. 우선, 운항 및 작업 중 환경 하중 (바람, 파도, 조류 등)에 대한 고려를 해야 하고, 국제 해상 충돌 예방 규칙 (Convention of the International Regulations for Preventing Collisions at Sea, COLREGs)에 의한 선박간의 항법 규정을 고려하여 충돌 회피 규칙을 준수해야 한다. 특히 연근해의 복잡한 해역에서는 많은 선박을 자동으로 회피할 필요가 있다. 기존의 해석적인 방법을 사용하기 위해서는 선박들에 대한 정확한 시스템 모델링이 되어야 하며, 그 과정에서 경험 (experience)에 의존하는 파라미터 튜닝이 필수적이다. 또한, 회피해야 할 선박 수가 많아질 경우 시스템 모델이 커지게 되고 계산 양과 계산 시간이 늘어나 실시간 적용이 어렵다는 단점이 있다. 또한, 경로 추종 및 충돌 회피를 포함하여 자율 운항 방법을 적용하기가 어렵다. 따라서 본 연구에서는 강화 학습 (Reinforcement Learning: RL) 기법을 이용하여 기존 해석적인 방법의 문제점을 극복할 수 있는 방법을 제안하였다. 경로를 추종하는 선박 (agent)은 외부 환경 (environment)과 상호작용하면서 학습을 진행한다. State S_0 (선박의 움직임과 관련된 각종 상태) 가지는 agent는 policy (현재 위치에서 어떤 움직임을 선택할 것인가)에 따라 action A_0 (움직일 방향) 취한다. 이에 environment는 agent의 다음 state S_1 을 계산하고, 그에 따른 보상 R_0 (해당 움직임의 적합성)을 결정하여 agent에게 전달한다. 이러한 작업을 반복하면서 보상이 최대가 되도록 policy를 학습하게 된다. 한편, 해상에서 크레인을 이용한 장비의 이동이나 설치 작업 시 위험을 줄이기 위해 크레인의 거동 제어에 대한 요구가 증가하고 있다. 특히 해상에서는 선박의 운동에 의해 크레인에 매달린 물체가 상하 동요 (heave)와 크레인을 기준으로 좌우 동요 (sway)가 발생하는데, 이러한 운동은 작업을 지연시키고, 정확한 위치에 물체를 놓지 못하게 하며, 자칫 주변 구조물과의 충돌을 야기할 수 있다. 이와 같은 동요를 최소화하는 Anti-Motion Control (AMC) 시스템은 Anti-Heave Control (AHC)과 Anti-Sway Control (ASC)을 포함한다. 본 연구에서는 해양 작업 지원선에 적합한 AMC 시스템의 설계 및 검증 방법을 연구하였다. 먼저 상하 동요를 최소화하기 위해 크레인의 와이어 길이를 능동적으로 조정하는 AHC 시스템을 설계하였다. 또한, 기존의 제어 시스템의 검증 방법은 실제 선박이나 해양 구조물에 해당 제어 시스템을 직접 설치하기 전에는 그 성능을 테스트하기가 힘들었다. 이를 해결하기 위해 본 연구에서는 Hardware-In-the-Loop Simulation (HILS) 기법을 활용하여 AHC 시스템의 검증 방법을 연구하였다. 또한, ASC 시스템을 설계할 때 제어 대상이 under-actuated 시스템이기 때문에 제어하기가 매우 어렵다. 따라서 본 연구에서는 sliding mode control 알고리즘을 이용하며 다관절 크레인 (knuckle boom crane)의 관절 (joint) 각도를 제어하여 좌우 동요를 줄일 수 있는 ASC 시스템을 설계하였다.Chapter 1 Introduction 1 1.1 Background and Motivation . . . . . . . . . . . . . . . . . . . . . 1 1.2 Requirements for Autonomous Operation . . . . . . . . . . . . . 5 1.2.1 Path Following for Autonomous Ship . . . . . . . . . . . . 5 1.2.2 Collision Avoidance for Autonomous Ship . . . . . . . . . 5 1.2.3 Anti-Motion Control System for Autonomous Ship . . . . 6 1.3 Related Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.3.1 Related Work for Path Following System . . . . . . . . . 9 1.3.2 Related Work for Collision Avoidance System . . . . . . . 9 1.3.3 Related Work for Anti-Heave Control System . . . . . . . 13 1.3.4 Related Work for Anti-Sway Control System . . . . . . . 14 1.4 Configuration of Simulation Framework . . . . . . . . . . . . . . 16 1.4.1 Application Layer . . . . . . . . . . . . . . . . . . . . . . 16 1.4.2 Autonomous Ship Design Layer . . . . . . . . . . . . . . . 17 1.4.3 General Technique Layer . . . . . . . . . . . . . . . . . . 17 1.5 Contributions (Originality) . . . . . . . . . . . . . . . . . . . . . 19 Chapter 2 Theoretical Backgrounds 20 2.1 Maneuvering Model for Autonomous Ship . . . . . . . . . . . . . 20 2.1.1 Kinematic Equation for Autonomous Ship . . . . . . . . . 20 2.1.2 Kinetic Equation for Autonomous Ship . . . . . . . . . . 21 2.2 Multibody Dynamics Model for Knuckle Boom Crane of Autonomous Ship. . . 25 2.2.1 Embedding Techniques . . . . . . . . . . . . . . . . . . . . 25 2.3 Control System Design . . . . . . . . . . . . . . . . . . . . . . . . 31 2.3.1 Proportional-Integral-Derivative (PID) Control . . . . . . 31 2.3.2 Sliding Mode Control . . . . . . . . . . . . . . . . . . . . 31 2.4 Deep Reinforcement Learning Algorithm . . . . . . . . . . . . . . 34 2.4.1 Value Based Learning Method . . . . . . . . . . . . . . . 36 2.4.2 Policy Based Learning Method . . . . . . . . . . . . . . . 37 2.4.3 Actor-Critic Method . . . . . . . . . . . . . . . . . . . . . 41 2.5 Hardware-in-the-Loop Simulation . . . . . . . . . . . . . . . . . . 43 2.5.1 Integrated Simulation Method . . . . . . . . . . . . . . . 43 Chapter 3 Path Following Method for Autonomous OSV 46 3.1 Guidance System . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.1.1 Line-of-sight Guidance System . . . . . . . . . . . . . . . 46 3.2 Deep Reinforcement Learning for Path Following System . . . . . 50 3.2.1 Deep Reinforcement Learning Setup . . . . . . . . . . . . 50 3.2.2 Neural Network Architecture . . . . . . . . . . . . . . . . 56 3.2.3 Training Process . . . . . . . . . . . . . . . . . . . . . . . 58 3.3 Implementation and Simulation Result . . . . . . . . . . . . . . . 62 3.3.1 Implementation for Path Following System . . . . . . . . 62 3.3.2 Simulation Result . . . . . . . . . . . . . . . . . . . . . . 65 3.4 Comparison Results . . . . . . . . . . . . . . . . . . . . . . . . . 83 3.4.1 Comparison Result of PPO with PID . . . . . . . . . . . 83 3.4.2 Comparison Result of PPO with Deep Q-Network (DQN) 87 Chapter 4 Collision Avoidance Method for Autonomous OSV 89 4.1 Deep Reinforcement Learning for Collision Avoidance System . . 89 4.1.1 Deep Reinforcement Learning Setup . . . . . . . . . . . . 89 4.1.2 Neural Network Architecture . . . . . . . . . . . . . . . . 93 4.1.3 Training Process . . . . . . . . . . . . . . . . . . . . . . . 94 4.2 Implementation and Simulation Result . . . . . . . . . . . . . . . 95 4.2.1 Implementation for Collision Avoidance System . . . . . . 95 4.2.2 Simulation Result . . . . . . . . . . . . . . . . . . . . . . 100 4.3 Implementation and Simulation Result for Multi-ship Collision Avoidance Method . . . . . . . . . . . . . . . . . . . . . . . . . . 107 4.3.1 Limitations of Multi-ship Collision Avoidance Method - 1 107 4.3.2 Limitations of Multi-ship Collision Avoidance Method - 2 108 4.3.3 Implementation of Multi-ship Collision Avoidance Method 110 4.3.4 Simulation Result of Multi-ship Collision Avoidance Method 118 Chapter 5 Anti-Motion Control Method for Knuckle Boom Crane 129 5.1 Configuration of HILS for Anti-Heave Control System . . . . . . 129 5.1.1 Virtual Mechanical System . . . . . . . . . . . . . . . . . 132 5.1.2 Virtual Sensor and Actuator . . . . . . . . . . . . . . . . 138 5.1.3 Control System Design . . . . . . . . . . . . . . . . . . . . 141 5.1.4 Integrated Simulation Interface . . . . . . . . . . . . . . . 142 5.2 Implementation and Simulation Result of HILS for Anti-Heave Control System . . . . . . . . 145 5.2.1 Implementation of HILS for Anti-Heave Control System . 145 5.2.2 Simulation Result of HILS for Anti-Heave Control System 146 5.3 Validation of HILS for Anti-Heave Control System . . . . . . . . 159 5.3.1 Hardware Setup . . . . . . . . . . . . . . . . . . . . . . . 159 5.3.2 Comparison Result . . . . . . . . . . . . . . . . . . . . . . 161 5.4 Configuration of Anti-Sway Control System . . . . . . . . . . . . 162 5.4.1 Mechanical System for Knuckle Boom Crane . . . . . . . 162 5.4.2 Anti-Sway Control System Design . . . . . . . . . . . . . 165 5.4.3 Implementation and Simulation Result of Anti-Sway Control . . . . . . . . . . . . . . 168 Chapter 6 Conclusions and Future Works 176 Bibliography 178 Chapter A Appendix 186 국문초록 188Docto

Multidisciplinary and Multi-Objective Optimal Design of a Cascade Control System for a Flexible Wing with Embedded Control Surfaces Having Actuator Dynamics

A multidisciplinary and multi-objective optimization approach that integrates the design of the control surfaces’ sizes, active control systems, and estimator for an aircraft’s wing with three control surfaces is developed. Due to its attractive stability robustness properties, a control system based on the LQR (Linear Quadratic Regulator) is built for each control surface. The geometrical parameters of the control surfaces such as the span wise and chord lengths, the design details of the LQR penalty matrices, and the locations of the estimator poles are tuned by a widely used multi-objective optimization algorithm called NSGA-II (Non-dominated Sorting Genetic Algorithm). Four objectives are considered: minimizing impacts of external gust loads, maximizing stability robustness and extending flutter boundaries, reducing control energy consumption, and minimizing the Frobenius norm of the estimator gains. The solution of the multi-objective optimization problem is a set called Pareto set and the set of the corresponding function evaluation is called Pareto front. The solution set contains various geometrical configurations of the control surfaces with different feedback gains, which represent different degrees of optimal compromises among the design objectives. The optimization results demonstrate the competing relationship between the design objectives and necessity of handling the design problem in a multidisciplinary and multi-objective context. Three major results are obtained from inspecting the profiles of the closed-loop eigenvalues at various airspeeds 1) a unique control gain can be designed for the entire flight envelope, 2) the flutter boundaries can be infinitely extended, and 3) a unique observer gain can be designed for the entire flight envelope. The third chapter of this thesis presents a multi-objective and multidisciplinary optimal design of a cascade control system for an aircraft wing with four aerodynamic ailerons actuated by four identical brushless DC motors. The design of the control system is broken into a secondary and primary control algorithm. The primary control algorithm is designed based on the concept of LQR and then applied to mathematical model of the wing and its control surfaces to calculate their required deflections. The output of the primary controller serves as set-point for the secondary control loop which consists of the dynamic of the DC motor and Proportional Velocity (PV) based controller. Then, an optimal design of the control algorithms is carried out in multi-objective and multidisciplinary settings. Three objectives are considered: 1) the speed of response of the secondary controlled system must be faster than that of the primary one, 2) the controlled system must be robust against external disturbances affecting both control layers, and 3) optimal energy consumption. The decision variables of the primary as well as secondary control algorithms and the sizing elements of the control surfaces form the design parameter space of the optimization problem. Both geometrical and dynamic constraints are applied on the setup parameters. The multi-objective optimization problem (MOP) is solved by NSGA-II, which is one of the popular algorithms in solving MOPs. The solution of the MOP is a set of optimal control algorithms that represent the conflicts among the design objectives. Numerical simulations show that the design goals are achieved, the secondary control is always fast enough to prevent the propagation of disturbances to the primary loop, the inner and outer control algorithms are robust against disturbance inputs, and the primary control loop stays stable when the air stream velocity varies from 80 to 1000 (⁄) even at its worst relative stability value. The presented study may become the basis for multi-objective and multidisciplinary optimal design for aeroelastic structure having actuator dynamics

Adaptive simplified fuzzy logic controller for depth control of underwater remotely operated vehicle

A Remotely Operated Vehicle (ROV) is one class of the unmanned underwater vehicles that is tethered, unoccupied, highly manoeuvrable, and operated by a person on a platform on water surface. For depth control of ROV, an occurrence of overshoot in the system response is highly dangerous. Clearly an overshoot in the ROV vertical trajectory may cause damages to both the ROV and the inspected structure. Maintaining the position of a small scale ROV within its working area is difficult even for experienced ROV pilots, especially in the presence of underwater currents and waves. This project, focuses on controlling the ROV vertical trajectory as the ROV tries to remain stationary on the desired depth and having its overshoot, rise time and settling time minimized. This project begins with a mathematical and empirical modelling to capture the dynamics of a newly fabricated ROV, followed by an intelligent controller design for depth control of ROV based on the Single Input Fuzzy Logic Controller (SIFLC). Factors affecting the SIFLC were investigated including changing the number of rules, using a linear equation instead of a lookup table and adding a reference model. The parameters of the SIFLC were tuned by an improved Particle Swarm Optimization (PSO) algorithm. A novel adaptive technique called the Adaptive Single Input Fuzzy Logic Controller (ASIFLC) was introduced that has the ability to adapt its parameters depending on the depth set point used. The algorithm was verified in MATLAB® Simulink platform. Then, verified algorithms were tested on an actual prototype ROV in a water tank. Results show it was found that the technique can effectively control the depth of ROV with no overshoot and having its settling time minimized. Since the algorithm can be represented using simple mathematical equations, it can easily be realized using low cost microcontrollers