Optimal Policies of Advanced Sleep Modes for Energy-Efficient 5G networks

We study in this paper optimal control strategy for Advanced Sleep Modes (ASM) in 5G networks. ASM correspond to different levels of sleep modes ranging from deactivation of some components of the base station for several micro-seconds to switching off of almost all of them for one second or more. ASMs are made possible in 5G networks thanks to the definition of so-called lean carrier radio access which allows for configurable signaling periodicities. We model such a system using Markov Decision Processes (MDP) and find optimal sleep policy in terms of a trade-off between saved power consumption versus additional incurred delay for user traffic which has to wait for the network components to be woken-up and serve it. Eventually, for the system not to oscillate between sleep levels, we add a switching component in the cost function and show its impact on the energy reduction versus delay trade-off.Comment: The 18th IEEE International Symposium on Network Computing and Applications (NCA 2019) 26-28 September 2019 Cambridge, MA US

Energy sustainable paradigms and methods for future mobile networks: A survey

In this survey, we discuss the role of energy in the design of future mobile networks and, in particular, we advocate and elaborate on the use of energy harvesting (EH) hardware as a means to decrease the environmental footprint of 5G technology. To take full advantage of the harvested (renewable) energy, while still meeting the quality of service required by dense 5G deployments, suitable management techniques are here reviewed, highlighting the open issues that are still to be solved to provide eco-friendly and cost-effective mobile architectures. Several solutions have recently been proposed to tackle capacity, coverage and efficiency problems, including: C-RAN, Software Defined Networking (SDN) and fog computing, among others. However, these are not explicitly tailored to increase the energy efficiency of networks featuring renewable energy sources, and have the following limitations: (i) their energy savings are in many cases still insufficient and (ii) they do not consider network elements possessing energy harvesting capabilities. In this paper, we systematically review existing energy sustainable paradigms and methods to address points (i) and (ii), discussing how these can be exploited to obtain highly efficient, energy self-sufficient and high capacity networks. Several open issues have emerged from our review, ranging from the need for accurate energy, transmission and consumption models, to the lack of accurate data traffic profiles, to the use of power transfer, energy cooperation and energy trading techniques. These challenges are here discussed along with some research directions to follow for achieving sustainable 5G systems.Comment: Accepted by Elsevier Computer Communications, 21 pages, 9 figure

Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks

Conventional cellular wireless networks were designed with the purpose of providing high throughput for the user and high capacity for the service provider, without any provisions of energy efficiency. As a result, these networks have an enormous Carbon footprint. In this paper, we describe the sources of the inefficiencies in such networks. First we present results of the studies on how much Carbon footprint such networks generate. We also discuss how much more mobile traffic is expected to increase so that this Carbon footprint will even increase tremendously more. We then discuss specific sources of inefficiency and potential sources of improvement at the physical layer as well as at higher layers of the communication protocol hierarchy. In particular, considering that most of the energy inefficiency in cellular wireless networks is at the base stations, we discuss multi-tier networks and point to the potential of exploiting mobility patterns in order to use base station energy judiciously. We then investigate potential methods to reduce this inefficiency and quantify their individual contributions. By a consideration of the combination of all potential gains, we conclude that an improvement in energy consumption in cellular wireless networks by two orders of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843

Open Cell-less Network Architecture and Radio Resource Management for Future Wireless Communication Systems

In recent times, the immense growth of wireless traffic data generated from massive mobile devices, services, and applications results in an ever-increasing demand for huge bandwidth and very low latency, with the future networks going in the direction of achieving extreme system capacity and ultra reliable low latency communication (URLLC). Several consortia comprising major international mobile operators, infrastructure manufacturers, and academic institutions are working to develop and evolve the current generation of wireless communication systems, i.e., fifth generation (5G) towards a sixth generation (6G) to support improved data rates, reliability, and latency. Existing 5G networks are facing the latency challenges in a high-density and high-load scenario for an URLLC network which may coexist with enhanced mobile broadband (eMBB) services. At the same time, the evolution of mobile communications faces the important challenge of increased network power consumption. Thus, energy efficient solutions are expected to be deployed in the network in order to reduce power consumption while fulfilling user demands for various user densities. Moreover, the network architecture should be dynamic according to the new use cases and applications. Also, there are network migration challenges for the multi-architecture coexistence networks. Recently, the open radio access network (O-RAN) alliance was formed to evolve RANs with its core principles being intelligence and openness. It aims to drive the mobile industry towards an ecosystem of innovative, multi-vendor, interoperable, and autonomous RAN, with reduced cost, improved performance and greater agility. However, this is not standardized yet and still lacks interoperability. On the other hand, the cell-less radio access network (RAN) was introduced to boost the system performance required for the new services. However, the concept of cell-less RAN is still under consideration from the deployment point of view with the legacy cellular networks. The virtualization, centralization and cooperative communication which enables the cell-less RAN can further benefit from O-RAN based architecture. This thesis addresses the research challenges facing 5G and beyond networks towards 6G networks in regard to new architectures, spectral efficiency, latency, and energy efficiency. Different system models are stated according to the problem and several solution schemes are proposed and developed to overcome these challenges. This thesis contributes as follows. Firstly, the cell-less technology is proposed to be implemented through an Open RAN architecture, which could be supervised with the near real-time RAN intelligent controller (near-RT-RIC). The cooperation is enabled for intelligent and smart resource allocation for the entire RAN. Secondly, an efficient radio resource optimization mechanism is proposed for the cell-less architecture to improve the system capacity of the future 6G networks. Thirdly, an optimized and novel resource scheduling scheme is presented that reduces latency for the URLLC users in an efficient resource utilization manner to support scenarios with high user density. At the same time, this radio resource management (RRM) scheme, while minimizing the latency, also overcomes another important challenge of eMBB users, namely the throughput of those who coexist in such a highly loaded scenario with URLLC users. Fourthly, a novel energy-efficiency enhancement scheme, i.e., (3 × E) is designed to increase the transmission rate per energy unit, with stable performance within the cell-less RAN architecture. Our proposed (3 × E) scheme activates two-step sleep modes (i.e., certain phase and conditional phase) through the intelligent interference management for temporarily switching access points (APs) to sleep, optimizing the network energy efficiency (EE) in highly loaded scenarios, as well as in scenarios with lower load. Finally, a multi-architecture coexistence (MACO) network model is proposed to enable inter-connection of different architectures through coexistence and cooperation logical switches in order to enable smooth deployment of a cell-less architecture within the legacy networks. The research presented in this thesis therefore contributes new knowledge in the cellless RAN architecture domain of the future generation wireless networks and makes important contributions to this field by investigating different system models and proposing solutions to significant issues.Programa de Doctorado en Multimedia y Comunicaciones por la Universidad Carlos III de Madrid y la Universidad Rey Juan CarlosPresidenta: Matilde Pilar Sánchez Fernández.- Secretario: Alberto Álvarez Polegre.- Vocal: José Francisco Monserrat del Rí

Network resource allocation policies with energy transfer capabilities

During the last decades, mobile network operators have witnessed an exponential increase in the traffic demand, mainly due to the high request of services from a huge amount of users. The trend is of a further increase in both the traffic demand and the number of connected devices over the next years. The traffic load is expected to have an annual growth rate of 53% for the mobile network alone, and the upcoming industrial era, which will connect different types of devices to the mobile infrastructure including human and machine type communications, will definitely exacerbate such an increasing trend. The current directions anticipate that future mobile networks will be composed of ultra dense deployments of heterogeneous Base Stations (BSs), where BSs using different transmission powers coexist. Accordingly, the traditional Macro BSs layer will be complemented or replaced with multiple overlapping tiers of small BSs (SBSs), which will allow extending the system capacity. However, the massive use of Information and Communication Technology (ICT) and the dense deployment of network elements is going to increase the level of energy consumed by the telecommunication infrastructure and its carbon footprint on the environment. Current estimations indicates that 10% of the worldwide electricity generation is due to the ICT industry and this value is forecasted to reach 51% by 2030, which imply that 23% of the carbon footprint by human activity will be due to ICT. Environmental sustainability is thus a key requirement for designing next generation mobile networks. Recently, the use of Renewable Energy Sources (RESs) for supplying network elements has attracted the attention of the research community, where the interest is driven by the increased efficiency and the reduced costs of energy harvesters and storage devices, specially when installed to supply SBSs. Such a solution has been demonstrated to be environmentally and economically sustainable in both rural and urban areas. However, RESs will entail a higher management complexity. In fact, environmental energy is inherently erratic and intermittent, which may cause a fluctuating energy inflow and produce service outage. A proper control of how the energy is drained and balanced across network elements is therefore necessary for a self-sustainable network design. In this dissertation, we focus on energy harvested through solar panels that is deemed the most appropriate due to the good efficiency of commercial photovoltaic panels as well as the wide availability of the solar source for typical installations. The characteristics of this energy source are analyzed in the first technical part of the dissertation, by considering an approach based on the extraction of features from collected data of solar energy radiation. In the second technical part of the thesis we introduce our proposed scenario. A federation of BSs together with the distributed harvesters and storage devices at the SBS sites form a micro-grid, whose operations are managed by an energy management system in charge of controlling the intermittent and erratic energy budget from the RESs. We consider load control (i.e., enabling sleep mode in the SBSs) as a method to properly manage energy inflow and spending, based on the traffic demand. Moreover, in the third technical part, we introduce the possibility of improving the network energy efficiency by sharing the exceeding energy that may be available at some BS sites within the micro-grid. Finally, a centralized controller based on supervised and reinforcement learning is proposed in the last technical part of the dissertation. The controller is in charge of opportunistically operating the network to achieve efficient utilization of the harvested energy and prevent SBSs blackout.Durante las últimas décadas, los operadores de redes móviles han sido testigos de un aumento exponencial en la demanda de tráfico, principalmente debido a la gran solicitud de servicios de una gran cantidad de usuarios. La tendencia es un aumento adicional tanto en la demanda de tráfico como en la cantidad de dispositivos conectados en los próximos años. Se espera que la carga de tráfico tenga una tasa de crecimiento anual del 53% solo para la red móvil, y la próxima era industrial, que conectará diferentes tipos de dispositivos a la infraestructura móvil, definitivamente exacerbará tal aumento. Las instrucciones actuales anticipan que las redes móviles futuras estarán compuestas por despliegues ultra densos de estaciones base (BS) heterogéneas. En consecuencia, la capa tradicional de Macro BS se complementará o reemplazará con múltiples niveles superpuestos de pequeños BS (SBS), lo que permitirá ampliar la capacidad del sistema. Sin embargo, el uso masivo de la Tecnología de la Información y la Comunicación (TIC) y el despliegue denso de los elementos de la red aumentará el nivel de energía consumida por la infraestructura de telecomunicaciones y su huella de carbono en el medio ambiente. Las estimaciones actuales indican que el 10% de la generación mundial de electricidad se debe a la industria de las TIC y se prevé que este valor alcance el 51% para 2030, lo que implica que el 23% de la huella de carbono por actividad humana se deberá a las TIC. La sostenibilidad ambiental es, por lo tanto, un requisito clave para diseñar redes móviles de próxima generación. Recientemente, el uso de fuentes de energía renovables (RES) para suministrar elementos de red ha atraído la atención de la comunidad investigadora, donde el interés se ve impulsado por el aumento de la eficiencia y la reducción de los costos de los recolectores y dispositivos de almacenamiento de energía, especialmente cuando se instalan para suministrar SBS. Se ha demostrado que dicha solución es ambiental y económicamente sostenible tanto en áreas rurales como urbanas. Sin embargo, las RES conllevarán una mayor complejidad de gestión. De hecho, la energía ambiental es inherentemente errática e intermitente, lo que puede causar una entrada de energía fluctuante y producir una interrupción del servicio. Por lo tanto, es necesario un control adecuado de cómo se drena y equilibra la energía entre los elementos de la red para un diseño de red autosostenible. En esta disertación, nos enfocamos en la energía cosechada a través de paneles solares que se considera la más apropiada debido a la buena eficiencia de los paneles fotovoltaicos comerciales, así como a la amplia disponibilidad de la fuente solar para instalaciones típicas. Las características de esta fuente de energía se analizan en la primera parte técnica de la disertación, al considerar un enfoque basado en la extracción de características de los datos recopilados de radiación de energía solar. En la segunda parte técnica de la tesis presentamos nuestro escenario propuesto. Una federación de BS junto con los cosechadores distribuidos y los dispositivos de almacenamiento forman una microrred, cuyas operaciones son administradas por un sistema de administración de energía a cargo de controlar el presupuesto de energía intermitente y errático de las RES. Consideramos el control de carga como un método para administrar adecuadamente la entrada y el gasto de energía, en función de la demanda de tráfico. Además, en la tercera parte técnica, presentamos la posibilidad de mejorar la eficiencia energética de la red al compartir la energía excedente que puede estar disponible en algunos sitios dentro de la microrred. Finalmente, se propone un controlador centralizado basado en aprendizaje supervisado y de refuerzo en la última parte técnica de la disertación. El controlador está a cargo de operar la red para lograr una utilización eficiente de energía y previene el apagón de SB