6,243 research outputs found
Smart Grid for the Smart City
Modern cities are embracing cutting-edge technologies to improve the services they offer to the citizens from traffic control to the reduction of greenhouse gases and energy provisioning. In this chapter, we look at the energy sector advocating how Information and Communication Technologies (ICT) and signal processing techniques can be integrated into next generation power grids for an increased effectiveness in terms of: electrical stability, distribution, improved communication security, energy production, and utilization. In particular, we deliberate about the use of these techniques within new demand response paradigms, where communities of prosumers (e.g., households, generating part of their electricity consumption) contribute to the satisfaction of the energy demand through load balancing and peak shaving. Our discussion also covers the use of big data analytics for demand response and serious games as a tool to promote energy-efficient behaviors from end users
Optimal Distributed Power Generation Under Network-Load Constraints
In electrical power networks nowadays more and more customers are becoming power-producers, mainly because of the development of novel components for decentralized power generation (solar panels, small wind turbines and heat pumps). This gives rise to the question how many units of each type (solar panel, small wind turbine or central heating power units) can be inserted into any transmission line in the network, such that under given distributions on the typical production and consumption over time, the maximum loads on the lines and components will not be exceeded.
In this paper, we present a linear programming model for maximizing the amount
of decentralized power generation while respecting the load limitations of the
network.
We describe a prototype showing that for an example network the maximization
problem can be solved efficiently. We also modeled the case were the power consumption and decentralized power generation are considered as stochastic variables, which is inherently more complex
A SPEA2 Based Planning Framework for Optimal Integration of Distributed Generations
The paper presents a multi-objective optimisation method for analysing the best mix of renewable and non- renewable distributed generations (DG) in a distribution network. The method aims at minimising the total cost of the real power generation, line losses and CO2 emissions, and maximising the benefits from DG installations over a planning horizon of 20 years. The paper proposes new objective functions that take into account the longevity of DG operations as one of its selection criteria. The analysis utilises the Strength Pareto Evolutionary Algorithm 2 (SPEA2) for optimisation and MATPOWER for solving the optimal power flow problems
Can Distribution Grids Significantly Contribute to Transmission Grids' Voltage Management?
Power generation in Germany is currently transitioning from a system based on
large, central, thermal power plants to one that heavily relies on small,
decentral, mostly renewable power generators. This development poses the
question how transmission grids' reactive power demand for voltage management,
covered by central power plants today, can be supplied in the future.
In this work, we estimate the future technical potential of such an approach
for the whole of Germany. For a 100% renewable electricity scenario we set the
possible reactive power supply in comparison with the reactive power
requirements that are needed to realize the simulated future transmission grid
power flows. Since an exact calculation of distribution grids' reactive power
potential is difficult due to the unavailability of detailed grid models on
such scale, we optimistically estimate the potential by assuming a scaled,
averaged distribution grid model connected to each of the transmission grid
nodes.
We find that for all except a few transmission grid nodes, the required
reactive power can be fully supplied from the modeled distribution grids. This
implies that - even if our estimate is overly optimistic - distributed reactive
power provisioning will be a technical solution for many future reactive power
challenges
Power quality and electromagnetic compatibility: special report, session 2
The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems.
Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages).
The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks:
Block 1: Electric and Magnetic Fields, EMC, Earthing systems
Block 2: Harmonics
Block 3: Voltage Variation
Block 4: Power Quality Monitoring
Two Round Tables will be organised:
- Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13)
- Reliability Benchmarking - why we should do it? What should be done in future? (RT 15
The small wind turbine field lab extensive field tests for small wind turbines
This paper describes the research possibilities at the Small Wind Turbine Field Lab and the involved research groups of Ghent University, covering different aspects of a small wind energy system. In contrast to large and medium-sized wind turbines, small wind turbines are still plagued by relatively high production and purchase costs, and low reliability and energy yield. Furthermore, most of them have not been subjected to a field test program. Power-Link, the energy knowledge platform of Ghent University, has for three years operated a modest field test site for small wind turbines, that drew the attention of a lot of manufacturers of small wind turbines. In response, Ghent University decided to launch the Small Wind Turbine Field Lab (SWT Field Lab), to subject small wind turbines to more extensive field tests. Now not only the energy yield is tested, but also topics such as grid integration, structural strength, noise propagation, generator and drive train design and tower construction are studied. All of these parameters are correlated with meteorological data measured on-site
Recommended from our members
Operation and planning of distribution networks with integration of renewable distributed generators considering uncertainties: a review
YesDistributed generators (DGs) are a reliable solution to supply economic and reliable electricity to customers. It is the last stage in delivery of electric power which can be defined as an electric power source connected directly to the distribution network or on the customer site. It is necessary to allocate DGs optimally (size, placement and the type) to obtain commercial, technical, environmental and regulatory advantages of power systems. In this context, a comprehensive literature review of uncertainty modeling methods used for modeling uncertain parameters related to renewable DGs as well as methodologies used for the planning and operation of DGs integration into distribution network.This work was supported in part by the SITARA project funded by the British Council and the Department for Business, Innovation and Skills, UK and in part by the University of Bradford, UK under the CCIP grant 66052/000000
A Multi-Objective Planning Framework for Optimal Integration of Distributed Generations
This paper presents an evolutionary algorithm for analyzing the best mix of distributed generations (DG) in a distribution network. The multi-objective optimization aims at minimizing the total cost of real power generation, line losses and CO2 emissions, and maximizing the benefits from the DG over a 20 years planning horizon. The method assesses the fault current constraint imposed on the distribution network by the existing and new DG in order not to violate the short circuit capacity of existing switchgear. The analysis utilizes one of the highly regarded evolutionary algorithm, the Strength Pareto Evolutionary Algorithm 2 (SPEA2) for multi-objective optimization and MATPOWER for solving the optimal power flow problems
- …