Impact of UAV Hardware Options on Bridge Inspection Mission Capabilities

Uncrewed Aerial Vehicles (UAV) constitute a rapidly evolving technology field that is becoming more accessible and capable of supplementing, expanding, and even replacing some traditionally manual bridge inspections. Given the classification of the bridge inspection types as initial, routine, in-depth, damage, special, and fracture critical members, specific UAV mission requirements can be developed, and their suitability for UAV application examined. Results of a review of 23 applications of UAVs in bridge inspections indicate that mission sensor and payload needs dictate the UAV configuration and size, resulting in quadcopter configurations being most suitable for visual camera inspections (43% of visual inspections use quadcopters), and hexa- and octocopter configurations being more suitable for higher payload hyperspectral, multispectral, and Light Detection and Ranging (LiDAR) inspections (13%). In addition, the number of motors and size of the aircraft are the primary drivers in the cost of the vehicle. 75% of vehicles rely on GPS for navigation, and none of them are capable of contact inspections. Factors that limit the use of UAVs in bridge inspections include the UAV endurance, the capability of navigation in GPS deprived environments, the stability in confined spaces in close proximity to structural elements, and the cost. Current research trends in UAV technologies address some of these limitations, such as obstacle detection and avoidance methods, autonomous flight path planning and optimization, and UAV hardware optimization for specific mission requirements

Aerial Robotics for Inspection and Maintenance

Aerial robots with perception, navigation, and manipulation capabilities are extending the range of applications of drones, allowing the integration of different sensor devices and robotic manipulators to perform inspection and maintenance operations on infrastructures such as power lines, bridges, viaducts, or walls, involving typically physical interactions on flight. New research and technological challenges arise from applications demanding the benefits of aerial robots, particularly in outdoor environments. This book collects eleven papers from different research groups from Spain, Croatia, Italy, Japan, the USA, the Netherlands, and Denmark, focused on the design, development, and experimental validation of methods and technologies for inspection and maintenance using aerial robots

From Pillars to AI Technology-Based Forest Fire Protection Systems

The importance of forest environment in the perspective of the biodiversity as well as from the economic resources which forests enclose, is more than evident. Any threat posed to this critical component of the environment should be identified and attacked through the use of the most efficient available technological means. Early warning and immediate response to a fire event are critical in avoiding great environmental damages. Fire risk assessment, reliable detection and localization of fire as well as motion planning, constitute the most vital ingredients of a fire protection system. In this chapter, we review the evolution of the forest fire protection systems and emphasize on open issues and the improvements that can be achieved using artificial intelligence technology. We start our tour from the pillars which were for a long time period, the only possible method to oversee the forest fires. Then, we will proceed to the exploration of early AI systems and will end-up with nowadays systems that might receive multimodal data from satellites, optical and thermal sensors, smart phones and UAVs and use techniques that cover the spectrum from early signal processing algorithms to latest deep learning-based ones to achieving the ultimate goal

Artificial Intelligence Applications for Drones Navigation in GPS-denied or degraded Environments

L'abstract è presente nell'allegato / the abstract is in the attachmen

UAV inspection of large components: indoor navigation relative to structures

The inspection of large structures is increasingly carried out with the help of Unmanned Aerial Vehicles (UAVs). When navigating relative to the structure, multiple data sources can be used to determine the position of the UAV. Examples include track data from an installed camera and sensor data from the orientation sensors of the UAV. This paper deals with the fusion of this data and its use for navigation alongside the structure. For the sensor fusion, a concept is developed using a Kalman filter and evaluated simulatively in a prototype. The calculated position data are also fed into a vector flight control system, which dynamically calculates and flies a trajectory along the component using the potential field method. This is done taking into account obstacles detected by the onboard sensors of the UAV. The established concept is then implemented with the Robot Operating System (ROS) and evaluated simulatively

Smart maintenance and inspection of linear assets: An Industry 4.0 approach

Linear assets have linear properties, for instance, similar underlying geometry and characteristics, over a distance. They show specific patterns of continuous inherent deteriorations and failures. Therefore, remedial inspection and maintenance actions will be similar along the length of a linear asset, but because as the asset is distributed over a large area, the execution costs are greater. Autonomous robots, for instance, unmanned aerial vehicles, pipe inspection gauges, and remotely operated vehicles, are used in different industrial settings in an ad-hoc manner for inspection and maintenance. Autonomous robots can be programmed for repetitive and specific tasks; this is useful for the inspection and maintenance of linear assets. This paper reviews the challenges of maintaining the linear assets, focusing on inspections. It also provides a conceptual framework for the use of autonomous inspection and maintenance practices for linear assets to reduce maintenance costs, human involvement, etc., whilst improving the availability of linear assets by effective use of autonomous robots and data from different sources

Innovative Tools For Planning, Analysis, and Management of UAV Photogrammetric Surveys

The Unmanned Aerial System (UAV) is widely used in the photogrammetric surveys both for structures and small areas. The geomatics approach, for the several applications where the 3D modeling is required, focuses the attention on the metric quality of the final products of the survey. As widely known, the quality of results derives from the quality of images acquisition phase, which needs an accurate planning phase. Actually, the planning phase is typically managed using dedicated tools, adapted from the traditional aerial-photogrammetric flight plan. Unfortunately, UAV flight has features completely different from the traditional one, hence the use of UAV for photogrammetric applications today requires a growth in the planning knowledge. The basic idea of the present research work is to provide a tool for planning a photogrammetric survey with UAV, called \u201cUnmanned Photogrammetric Office\u201d (U.Ph.O.), that considers the morphology of the object, the effective visibility of its surface, in the respect of the metric precisions. The usual planning tools require the classical parameters of a photogrammetric planning: flight distance from the surface, images overlaps and geometric parameters of the camera. The created \u201cOffice suite\u201d U.Ph.O. allows a realistic planning of a photogrammetric survey, requiring additionally an approximate knowledge of the Digital Surface Model (DSM) and the attitude parameters, potentially changing along the route. The planning products will be the realistic overlapping of the images, the Ground Sample Distance (GSD) and the precision on each pixel taking into account the real geometry. The different tested procedures, the solution proposed to estimates the realistic precisions in the particular case of UAV surveys and the obtained results, are described in this thesis work, with an overview on the recently development of UAV surveys and technologies related to them