20,734 research outputs found

    Desarrollo de papeles biocativos por injerto de moléculas específicas en celulosa

    Get PDF
    Tesis (DCI)--FCEFN-UNC, 2019En la presente tesis se presenta el desarrollo de papeles bioactivos con potencial aplicación en el envasado activo de alimentos. Para tal fin, se propuso el injerto de eugenol, un compuesto de origen natural con propiedades antimicrobiana, antioxidante y repelente de insectos, en celulosa, utilizando ácido policarboxílico como agente ligante. Con el objetivo de evaluar la escalabilidad del proceso propuesto, se estudiaron distintas tecnologías de curado, tales como calentamiento por convección, infrarrojo, microondas y conducción. En todos los casos, se analizaron la influencia de las variables operativas sobre el avance de la reacción y propiedades finales del papel preparado, utilizando un diseño de experimentos Doehlert para elegir las experiencias a realizar, y analizando los resultados mediante metodología de superficie de respuesta y análisis estadístico ANOVA. Se pudo comprobar que la reacción de injerto de eugenol en papel comercial se produjo con éxito en todas las tecnologías estudiadas. Asimismo, se encontraron las condiciones óptimas de reacción para cada una de las tecnologías, para lo cual se buscó un compromiso entre el avance de la reacción y las propiedades finales del material (mecánicas y color). A partir de estas condiciones, se prepararon papeles y se realizó una caracterización más específica para su aplicación como envase de alimentos comparando los papeles modificados con el papel virgen. Se analizaron las propiedades mecánicas por ensayo de tracción, rasgado y punzonado y se midió la absorción de agua y la capacidad de degradación. Por otro lado, las propiedades bioactivas analizadas fueron la actividad antioxidante, antimicrobiana, repelente e insecticida de gorgojos (T. castaneum y R. dominica). Una vez probado que el papel modificado presenta buenas características físicas y bioactivas para su posible aplicación en el envasado de alimentos, se realizaron prototipos de envasado para harina, como alimento representativo de alimentos derivados de cereales, susceptibles al ataque de plagas. En este estudio se analizó la migración de reactivos, propiedades organolépticas y conservación del alimento, arrojando resultados promisorios para la industria de envases de alimentos. Finalmente, se realizó una comparación de las tecnologías de curado ensayadas, analizando diferentes aspectos como avance de reacción, propiedades finales, apariencia, tiempo de reacción, consumo de energía, entre otros, como así también disponibilidad y uso de estas tecnologías a escala industrial, seleccionando la tecnología de conducción como la más adecuada para una propuesta de escalado industrial.Fil: Muratore, Florencia. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas, Físicas y Naturales; Argentina.Fil: Muratore, Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas. Instituto de Investigación y Desarrollo en Ingeniería de Procesos y Química Aplicada; Argentina

    Modelling uncertainties for measurements of the H → γγ Channel with the ATLAS Detector at the LHC

    Get PDF
    The Higgs boson to diphoton (H → γγ) branching ratio is only 0.227 %, but this final state has yielded some of the most precise measurements of the particle. As measurements of the Higgs boson become increasingly precise, greater import is placed on the factors that constitute the uncertainty. Reducing the effects of these uncertainties requires an understanding of their causes. The research presented in this thesis aims to illuminate how uncertainties on simulation modelling are determined and proffers novel techniques in deriving them. The upgrade of the FastCaloSim tool is described, used for simulating events in the ATLAS calorimeter at a rate far exceeding the nominal detector simulation, Geant4. The integration of a method that allows the toolbox to emulate the accordion geometry of the liquid argon calorimeters is detailed. This tool allows for the production of larger samples while using significantly fewer computing resources. A measurement of the total Higgs boson production cross-section multiplied by the diphoton branching ratio (σ × Bγγ) is presented, where this value was determined to be (σ × Bγγ)obs = 127 ± 7 (stat.) ± 7 (syst.) fb, within agreement with the Standard Model prediction. The signal and background shape modelling is described, and the contribution of the background modelling uncertainty to the total uncertainty ranges from 18–2.4 %, depending on the Higgs boson production mechanism. A method for estimating the number of events in a Monte Carlo background sample required to model the shape is detailed. It was found that the size of the nominal γγ background events sample required a multiplicative increase by a factor of 3.60 to adequately model the background with a confidence level of 68 %, or a factor of 7.20 for a confidence level of 95 %. Based on this estimate, 0.5 billion additional simulated events were produced, substantially reducing the background modelling uncertainty. A technique is detailed for emulating the effects of Monte Carlo event generator differences using multivariate reweighting. The technique is used to estimate the event generator uncertainty on the signal modelling of tHqb events, improving the reliability of estimating the tHqb production cross-section. Then this multivariate reweighting technique is used to estimate the generator modelling uncertainties on background V γγ samples for the first time. The estimated uncertainties were found to be covered by the currently assumed background modelling uncertainty

    A Microfluidic Device as a Drug Carrier

    Get PDF
    The development of nanomedicine or medical nanotechnology, has brought important new ways to the development of medicines and biotechnology products. As a result of groundbreaking discoveries in the use of nanoscale materials significant commercialization initiatives have been launched and are at the forefront of the rapidly expanding field of nanotechnology by using smart particles. Microfluidic technologies use nano-and micro-scale manufacturing technologies to develop controlled and reproducible liquid microenvironments. Lead compounds with controlled physicochemical properties can be obtained using microfluidics, characterized by high productivity, and evaluated by biomimetic methods. Microfluidics, for example, can not only produce nanoparticles in a well-controlled, reproducible, and high-throughput manner, but it can also continuously create three-dimensional environments to mimic physiological and/or pathological processes. Materials with smart properties can be manipulated to respond in a controllable and reversible way, modifying some of their properties as a result of external stimuli such as mechanical stress or a certain temperature. All in all, microfluidic technology offers a potential platform for the rapid synthesis of various novel drug delivery systems. Therefore, these smart particles are equally necessary as the drug in drug delivery

    Development of an Electrodialysis (ED) Desalination System Using Cement Mortar-Structured Zeolite Membranes from Corn Stover (Zea Mays) Ash

    Get PDF
    Zeolite A was synthesized from corn (Zea Mays) stover ash using a hydrothermal method. The corn stover ash and synthesized zeolite A were characterized by X-ray fluorescence (XRF), thermogravimetry (TG-DTA), Brunauer-Emmert-Teller (BET), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). The effects of calcination time, fusion ratios, and curing time were examined. The yield and cation exchange capacity (CEC) of the synthesized zeolite A were investigated using statistical test via the Response Surface Methodology employing a Central Composite Design through the multiple objective optimizations with desirability function. The obtained optimum parameters for the maximum % yield (75.08%) and CEC (2.282 meq/g) were as follows: calcination temperature (534.5oC), fusion ratios (1:1.708), and curing time (10.50 hours). The maximum overall desirability of 0.5970 was attained. Response surface methodology by a two-level full factorial central composite design optimized the binder ratios, applied voltage and cell pair for cement mortar-structured zeolite membrane employing synthesized zeolite A in hydrogen form (zeolite HA) in an electrodialysis (ED) desalination system. All of the variables examined, specifically the binder ratio (15.00%), the applied voltage (15.00V), and the number of stacked cell pairs (3 pairs) were found to have an influence on sodium ion removal (80.68%). The developed model enables prediction of the separation percentage of an ED cell under various operating conditions. In summary, an ED desalination system built on corn stover-based cement mortar-structured zeolite membranes was proven to be an efficient alternative method for treating saltwater or brackish water and ultimately producing fresh water. The study successfully demonstrated its aim to develop a technology application that is novel and is a potent alternative for an ED desalination system that is simple, economical, and readily available for rural communities to gain access to clean and freshwater

    BECOMEBECOME - A TRANSDISCIPLINARY METHODOLOGY BASED ON INFORMATION ABOUT THE OBSERVER

    Get PDF
    ABSTRACT Andrea T. R. Traldi BECOMEBECOME A Transdisciplinary Methodology Based on Information about the Observer The present research dissertation has been developed with the intention to provide practical strategies and discover new intellectual operations which can be used to generate Transdisciplinary insight. For this reason, this thesis creates access to new knowledge at different scales. Firstly, as it pertains to the scale of new knowledge generated by those who attend Becomebecome events. The open-source nature of the Becomebecome methodology makes it possible for participants in Becomebecome workshops, training programmes and residencies to generate new insight about the specific project they are working on, which then reinforce and expand the foundational principles of the theoretical background. Secondly, as it pertains to the scale of the Becomebecome framework, which remains independent of location and moment in time. The method proposed to access Transdisciplinary knowledge constitutes new knowledge in itself because the sequence of activities, described as physical and mental procedures and listed as essential criteria, have never been found organised 6 in such a specific order before. It is indeed the order in time, i.e. the sequence of the ideas and activities proposed, which allows one to transform Disciplinary knowledge via a new Transdisciplinary frame of reference. Lastly, new knowledge about Transdisciplinarity as a field of study is created as a consequence of the heretofore listed two processes. The first part of the thesis is designated ‘Becomebecome Theory’ and focuses on the theoretical background and the intellectual operations necessary to support the creation of new Transdisciplinary knowledge. The second part of the thesis is designated ‘Becomebecome Practice’ and provides practical examples of the application of such operations. Crucially, the theoretical model described as the foundation for the Becomebecome methodology (Becomebecome Theory) is process-based and constantly checked against the insight generated through Becomebecome Practice. To this effect, ‘information about the observer’ is proposed as a key notion which binds together Transdisciplinary resources from several studies in the hard sciences and humanities. It is a concept that enables understanding about why and how information that is generated through Becomebecome Practice is considered of paramount importance for establishing the reference parameters necessary to access Transdisciplinary insight which is meaningful to a specific project, a specific person, or a specific moment in time

    Self-help/mutual aid groups in mental health : ideology, helping mechanisms and empowerment

    Get PDF
    In the last quarter of the twentieth century, self-help/mutual aid groups for mental health issues started to emerge in growing numbers, mainly in Western societies, offering and/or advocating for alternative non-traditional forms of support, and attracted the attention of many researchers and clinicians for their unique characteristics. Among the subjects of interest are typologies of groups, helping mechanisms and benefits from participation. However, there is lack of systematic research in the area and existing studies have been largely confined to the therapeutic value of these groups instead of acknowledging their socio-political meaning and subsequent psychosocial benefits for their members like personal empowerment. The present study was conducted during the transitional years from a Conservative to a newly elected Labour Government (1996 -1998), with subsequent policy shifts taking place in the welfare sector. The purpose of the study was to explore the potential of self-help groups as part of a broader new social movement, the service user movement, focussing on the English scene. It addressed this issue examining the relevance of a group typology based on political ideology and focus of change. To test the validity of this classification for members, a set of individual characteristics and group mechanisms as well as their change through time were examined. The sample consisted of fourteen mental health selfhelp/mutual aid groups from London and South East England, with a variety of structural and organisational features. The methodology used was a combination of both quantitative (self-completion questionnaires) and qualitative techniques (analysis of written material, participant observation and interviews). Measurements were repeated after a one-year interval (Time 1N=67, Time 2 N=56). Findings showed that, indeed, political ideology of self-help/mutual aid groups provided the basis of a meaningful typology and constitutes a comprehensive way of categorising them. Group ideology was related to specific helping mechanisms and aspects of personal empowerment. Specifically, conservative and combined group members reported more expressive group processes like sharing of feelings and self-disclosure, while radical group members were more empowered and optimistic. Group identification was also associated with specific helping activities and aspects of empowerment in the three group categories. The psychosocial character of group types and the beneficial outcomes for members remained stable through time. In general, prolonged participation was reflected in greater member identification with the group and resulted in improved mental wellbeing, increased social support, companionship and optimism for the future

    Studies of strategic performance management for classical organizations theory & practice

    Get PDF
    Nowadays, the activities of "Performance Management" have spread very broadly in actually every part of business and management. There are numerous practitioners and researchers from very different disciplines, who are involved in exploring the different contents of performance management. In this thesis, some relevant historic developments in performance management are first reviewed. This includes various theories and frameworks of performance management. Then several management science techniques are developed for assessing performance management, including new methods in Data Envelopment Analysis (DEA) and Soft System Methodology (SSM). A theoretical framework for performance management and its practical procedures (five phases) are developed for "classic" organizations using soft system thinking, and the relationship with the existing theories are explored. Eventually these results are applied in three case studies to verify our theoretical development. One of the main contributions of this work is to point out, and to systematically explore the basic idea that the effective forms and structures of performance management for an organization are likely to depend greatly on the organizational configuration, in order to coordinate well with other management activities in the organization, which has seemingly been neglected in the existing literature of performance management research in the sense that there exists little known research that associated particular forms of performance management with the explicit assumptions of organizational configuration. By applying SSM, this thesis logically derives some main functional blocks of performance management in 'classic' organizations and clarifies the relationships between performance management and other management activities. Furthermore, it develops some new tools and procedures, which can hierarchically decompose organizational strategies and produce a practical model of specific implementation steps for "classic" organizations. Our approach integrates popular types of performance management models. Last but not least, this thesis presents findings from three major cases, which are quite different organizations in terms of management styles, ownership, and operating environment, to illustrate the fliexbility of the developed theoretical framework
    corecore