Exploring Hybrid SPM-Cache Architectures to Improve Performance and Energy Efficiency for Real-time Computing

Real-time computing is not just fast computing but time-predictable computing. Many tasks in safety-critical embedded real-time systems have hard real-time characteristics. Failure to meet deadlines may result in the loss of life or in large damages. Known of Worst Case Execution Time (WCET) is important for reliability or correct functional behavior of the system. As multi-core processors are increasingly adopted in industry, it has become a great challenge to accurately bound the worst-case execution time (WCET) for real-time systems running on multi-core chips. This is particularly true because of the inter-thread interferences in accessing shared resources on multi-cores, such as shared L2 caches, which can significantly affect the performance but are very difficult to be estimate statically. We propose an approach to analyzing Worst Case Execution Time (WCET) for multi-core processors with shared L2 instruction caches by using a model checking based method. Our experiments indicate that compared to the static analysis technique based on extended ILP (Integer Linear Programming), our approach improves the tightness of WCET estimation more than 31.1% for the benchmarks we studied. However, due to the inherent complexity of multi-core timing analysis and the state explosion problem, the model checking based approach currently can only work with small real-time kernels for dual-core processors. At the same time, improving the average-case performance and energy efficiency has also been important for real-time systems. Recently, Hybrid SPM-Cache (HSC) architectures by combining caches and Scratch-Pad Memories (SPMs) have been increasingly used in commercial processors and research prototypes. Our research explores HSC architectures for real-time systems to reconcile time predictability, performance, and energy consumption. We study the energy dissipation of a number of hybrid on-chip memory architectures by combining both caches and Scratch-Pad Memories (SPM) without increasing the total on-chip memory size. Our experimental results indicate that with the equivalent total on-chip memory size, several hybrid SPM-Cache architectures are more energy-efficient than either pure software controlled SPMs or pure hardware-controlled caches. In particular, using the hybrid SPM-cache to store both instructions and data can achieve the best energy efficiency. However, the SPM allocation for the HSC architecture must be aware of the cache to harness the full potential of the HSC architecture. First, we propose and evaluate four SPM allocation strategies to reduce WCET for hybrid SPM-Caches with different complexities. These algorithms differ by whether or not they can cooperate with the cache or be aware of the WCET. Our evaluation shows that the cache aware and WCET-oriented SPM allocation can maximally reduce the WCET with minimum or even positive impact on the average-case execution time (ACET). Moreover, we explore four SPM allocation algorithms to maximize performance on the HSC architecture, including three heuristic-based algorithms, and an optimal algorithm based on model checking. Our experiments indicate that the Greedy Stack Distance based Allocation (GSDA) can run efficiently while achieving performance either the same as or close to the optimal results got by the Optimal Stack Distance based Allocation (OSDA). Last but not the least, we extend the two stack distance based allocation algorithms to GSDA-E and OSDA-E to minimize the energy consumption of the HSC architecture. Our experimental results show that the GSDA-E can also reduce the energy either the same as or close to the optimal results attained by the OSDA-E, while achieving performance close to the OSDA and GSDA

FASTCUDA: Open Source FPGA Accelerator & Hardware-Software Codesign Toolset for CUDA Kernels

Using FPGAs as hardware accelerators that communicate with a central CPU is becoming a common practice in the embedded design world but there is no standard methodology and toolset to facilitate this path yet. On the other hand, languages such as CUDA and OpenCL provide standard development environments for Graphical Processing Unit (GPU) programming. FASTCUDA is a platform that provides the necessary software toolset, hardware architecture, and design methodology to efficiently adapt the CUDA approach into a new FPGA design flow. With FASTCUDA, the CUDA kernels of a CUDA-based application are partitioned into two groups with minimal user intervention: those that are compiled and executed in parallel software, and those that are synthesized and implemented in hardware. A modern low power FPGA can provide the processing power (via numerous embedded micro-CPUs) and the logic capacity for both the software and hardware implementations of the CUDA kernels. This paper describes the system requirements and the architectural decisions behind the FASTCUDA approach

Power-Efficient and Low-Latency Memory Access for CMP Systems with Heterogeneous Scratchpad On-Chip Memory

The gradually widening speed disparity of between CPU and memory has become an overwhelming bottleneck for the development of Chip Multiprocessor (CMP) systems. In addition, increasing penalties caused by frequent on-chip memory accesses have raised critical challenges in delivering high memory access performance with tight power and latency budgets. To overcome the daunting memory wall and energy wall issues, this thesis focuses on proposing a new heterogeneous scratchpad memory architecture which is configured from SRAM, MRAM, and Z-RAM. Based on this architecture, we propose two algorithms, a dynamic programming and a genetic algorithm, to perform data allocation to different memory units, therefore reducing memory access cost in terms of power consumption and latency. Extensive and intensive experiments are performed to show the merits of the heterogeneous scratchpad architecture over the traditional pure memory system and the effectiveness of the proposed algorithms

Energy Saving Techniques for Phase Change Memory (PCM)

In recent years, the energy consumption of computing systems has increased and a large fraction of this energy is consumed in main memory. Towards this, researchers have proposed use of non-volatile memory, such as phase change memory (PCM), which has low read latency and power; and nearly zero leakage power. However, the write latency and power of PCM are very high and this, along with limited write endurance of PCM present significant challenges in enabling wide-spread adoption of PCM. To address this, several architecture-level techniques have been proposed. In this report, we review several techniques to manage power consumption of PCM. We also classify these techniques based on their characteristics to provide insights into them. The aim of this work is encourage researchers to propose even better techniques for improving energy efficiency of PCM based main memory.Comment: Survey, phase change RAM (PCRAM

Fast, predictable and low energy memory references through architecture-aware compilation

The design of future high-performance embedded systems is hampered by two problems: First, the required hardware needs more energy than is available from batteries. Second, current cache-based approaches for bridging the increasing speed gap between processors and memories cannot guarantee predictable real-time behavior. A contribution to solving both problems is made in this paper which describes a comprehensive set of algorithms that can be applied at design time in order to maximally exploit scratch pad memories (SPMs). We show that both the energy consumption as well as the computed worst case execution time (WCET) can be reduced by up to to 80% and 48%, respectively, by establishing a strong link between the memory architecture and the compiler

Volatile STT-RAM Scratchpad Design and Data Allocation for Low Energy

[Abstract] On-chip power consumption is one of the fundamental challenges of current technology scaling. Cache memories consume a sizable part of this power, particularly due to leakage energy. STT-RAM is one of several new memory technologies that have been proposed in order to improve power while preserving performance. It features high density and low leakage, but at the expense of write energy and performance. This article explores the use of STT-RAM--based scratchpad memories that trade nonvolatility in exchange for faster and less energetically expensive accesses, making them feasible for on-chip implementation in embedded systems. A novel multiretention scratchpad partitioning is proposed, featuring multiple storage spaces with different retention, energy, and performance characteristics. A customized compiler-based allocation algorithm suitable for use with such a scratchpad organization is described. Our experiments indicate that a multiretention STT-RAM scratchpad can provide energy savings of 53% with respect to an iso-area, hardware-managed SRAM cache

Real-time human action recognition on an embedded, reconfigurable video processing architecture

Copyright @ 2008 Springer-Verlag.In recent years, automatic human motion recognition has been widely researched within the computer vision and image processing communities. Here we propose a real-time embedded vision solution for human motion recognition implemented on a ubiquitous device. There are three main contributions in this paper. Firstly, we have developed a fast human motion recognition system with simple motion features and a linear Support Vector Machine (SVM) classifier. The method has been tested on a large, public human action dataset and achieved competitive performance for the temporal template (eg. “motion history image”) class of approaches. Secondly, we have developed a reconfigurable, FPGA based video processing architecture. One advantage of this architecture is that the system processing performance can be reconfiured for a particular application, with the addition of new or replicated processing cores. Finally, we have successfully implemented a human motion recognition system on this reconfigurable architecture. With a small number of human actions (hand gestures), this stand-alone system is performing reliably, with an 80% average recognition rate using limited training data. This type of system has applications in security systems, man-machine communications and intelligent environments.DTI and Broadcom Ltd

FPGA implementation of real-time human motion recognition on a reconfigurable video processing architecture

In recent years, automatic human motion recognition has been widely researched within the computer vision and image processing communities. Here we propose a real-time embedded vision solution for human motion recognition implemented on a ubiquitous device. There are three main contributions in this paper. Firstly, we have developed a fast human motion recognition system with simple motion features and a linear Support Vector Machine(SVM) classifier. The method has been tested on a large, public human action dataset and achieved competitive performance for the temporal template (eg. ``motion history image") class of approaches. Secondly, we have developed a reconfigurable, FPGA based video processing architecture. One advantage of this architecture is that the system processing performance can be reconfigured for a particular application, with the addition of new or replicated processing cores. Finally, we have successfully implemented a human motion recognition system on this reconfigurable architecture. With a small number of human actions (hand gestures), this stand-alone system is performing reliably, with an 80% average recognition rate using limited training data. This type of system has applications in security systems, man-machine communications and intelligent environments