43 research outputs found
New Fault Tolerant Multicast Routing Techniques to Enhance Distributed-Memory Systems Performance
Distributed-memory systems are a key to achieve high performance computing and the most favorable architectures used in advanced research problems. Mesh connected multicomputer are one of the most popular architectures that have been implemented in many distributed-memory systems. These systems must support communication operations efficiently to achieve good performance. The wormhole switching technique has been widely used in design of distributed-memory systems in which the packet is divided into small flits. Also, the multicast communication has been widely used in distributed-memory systems which is one source node sends the same message to several destination nodes. Fault tolerance refers to the ability of the system to operate correctly in the presence of faults. Development of fault tolerant multicast routing algorithms in 2D mesh networks is an important issue. This dissertation presents, new fault tolerant multicast routing algorithms for distributed-memory systems performance using wormhole routed 2D mesh. These algorithms are described for fault tolerant routing in 2D mesh networks, but it can also be extended to other topologies. These algorithms are a combination of a unicast-based multicast algorithm and tree-based multicast algorithms. These algorithms works effectively for the most commonly encountered faults in mesh networks, f-rings, f-chains and concave fault regions. It is shown that the proposed routing algorithms are effective even in the presence of a large number of fault regions and large size of fault region. These algorithms are proved to be deadlock-free. Also, the problem of fault regions overlap is solved. Four essential performance metrics in mesh networks will be considered and calculated; also these algorithms are a limited-global-information-based multicasting which is a compromise of local-information-based approach and global-information-based approach. Data mining is used to validate the results and to enlarge the sample. The proposed new multicast routing techniques are used to enhance the performance of distributed-memory systems. Simulation results are presented to demonstrate the efficiency of the proposed algorithms
Performance analysis of wormhole routing in multicomputer interconnection networks
Perhaps the most critical component in determining the ultimate performance potential of a multicomputer is its interconnection network, the hardware fabric supporting communication among individual processors. The message latency and throughput of such a network are affected by many factors of which topology, switching method, routing algorithm and traffic load are the most significant. In this context, the present study focuses on a performance analysis of k-ary n-cube networks employing wormhole switching, virtual channels and adaptive routing, a scenario of especial interest to current research.
This project aims to build upon earlier work in two main ways: constructing new analytical models for k-ary n-cubes, and comparing the performance merits of cubes of different dimensionality. To this end, some important topological properties of k-ary n-cubes are explored initially; in particular, expressions are derived to calculate the number of nodes at/within a given distance from a chosen centre. These results are important in their own right but their primary significance here is to assist in the construction of new and more realistic analytical models of wormhole-routed k-ary n-cubes.
An accurate analytical model for wormhole-routed k-ary n-cubes with adaptive routing and uniform traffic is then developed, incorporating the use of virtual channels and the effect of locality in the traffic pattern. New models are constructed for wormhole k-ary n-cubes, with the ability to simulate behaviour under adaptive routing and non-uniform communication workloads, such as hotspot traffic, matrix-transpose and digit-reversal permutation patterns. The models are equally applicable to unidirectional and bidirectional k-ary n-cubes and are significantly more realistic than any in use up to now. With this level of accuracy, the effect of each important network parameter on the overall network performance can be investigated in a more comprehensive manner than before.
Finally, k-ary n-cubes of different dimensionality are compared using the new models. The comparison takes account of various traffic patterns and implementation costs, using both pin-out and bisection bandwidth as metrics. Networks with both normal and pipelined channels are considered. While previous similar studies have only taken account of network channel costs, our model incorporates router costs as well thus generating more realistic results. In fact the results of this work differ markedly from those yielded by earlier studies which assumed deterministic routing and uniform traffic, illustrating the importance of using accurate models to conduct such analyses
Practical Parallel Algorithms for Personalized Communication and Integer Sorting
A fundamental challenge for parallel computing is to obtain
high-level, architecture independent, algorithms which efficiently
execute on general-purpose parallel machines. With the emergence of
message passing standards such as MPI, it has become easier to design
efficient and portable parallel algorithms by making use of these
communication primitives. While existing primitives allow an
assortment of collective communication routines, they do not handle an
important communication event when most or all processors have
non-uniformly sized personalized messages to exchange with each other.
We focus in this paper on the h-relation personalized communication
whose efficient implementation will allow high performance
implementations of a large class of algorithms. While most previous
h-relation algorithms use randomization, this paper presents a new
deterministic approach for h-relation personalized communication. As
an application, we present an efficient algorithm for stable integer
sorting.
The algorithms presented in this paper have been coded in
Split-C and run on a variety of platforms, including the Thinking
Machines CM-5, IBM SP-1 and SP-2, Cray Research T3D, Meiko Scientific
CS-2, and the Intel Paragon. Our experimental results are consistent
with the theoretical analysis and illustrate the scalability and
efficiency of our algorithms across different platforms. In fact, they
seem to outperform all similar algorithms known to the authors on
these platforms.
(Also cross-referenced as UMIACS-TR-95-101.
Embedded dynamic programming networks for networks-on-chip
PhD ThesisRelentless technology downscaling and recent technological advancements
in three dimensional integrated circuit (3D-IC) provide a promising
prospect to realize heterogeneous system-on-chip (SoC) and homogeneous
chip multiprocessor (CMP) based on the networks-onchip
(NoCs) paradigm with augmented scalability, modularity and
performance. In many cases in such systems, scheduling and managing
communication resources are the major design and implementation
challenges instead of the computing resources. Past research
efforts were mainly focused on complex design-time or simple heuristic
run-time approaches to deal with the on-chip network resource
management with only local or partial information about the network.
This could yield poor communication resource utilizations and amortize
the benefits of the emerging technologies and design methods.
Thus, the provision for efficient run-time resource management in
large-scale on-chip systems becomes critical. This thesis proposes a
design methodology for a novel run-time resource management infrastructure
that can be realized efficiently using a distributed architecture,
which closely couples with the distributed NoC infrastructure. The
proposed infrastructure exploits the global information and status
of the network to optimize and manage the on-chip communication
resources at run-time.
There are four major contributions in this thesis. First, it presents a
novel deadlock detection method that utilizes run-time transitive closure
(TC) computation to discover the existence of deadlock-equivalence
sets, which imply loops of requests in NoCs. This detection scheme,
TC-network, guarantees the discovery of all true-deadlocks without
false alarms in contrast to state-of-the-art approximation and heuristic
approaches. Second, it investigates the advantages of implementing
future on-chip systems using three dimensional (3D) integration and
presents the design, fabrication and testing results of a TC-network
implemented in a fully stacked three-layer 3D architecture using a
through-silicon via (TSV) complementary metal-oxide semiconductor
(CMOS) technology. Testing results demonstrate the effectiveness
of such a TC-network for deadlock detection with minimal computational
delay in a large-scale network. Third, it introduces an adaptive
strategy to effectively diffuse heat throughout the three dimensional
network-on-chip (3D-NoC) geometry. This strategy employs a dynamic
programming technique to select and optimize the direction of data
manoeuvre in NoC. It leads to a tool, which is based on the accurate
HotSpot thermal model and SystemC cycle accurate model, to simulate
the thermal system and evaluate the proposed approach. Fourth, it
presents a new dynamic programming-based run-time thermal management
(DPRTM) system, including reactive and proactive schemes, to
effectively diffuse heat throughout NoC-based CMPs by routing packets
through the coolest paths, when the temperature does not exceed
chip鈥檚 thermal limit. When the thermal limit is exceeded, throttling is
employed to mitigate heat in the chip and DPRTM changes its course
to avoid throttled paths and to minimize the impact of throttling on
chip performance.
This thesis enables a new avenue to explore a novel run-time resource
management infrastructure for NoCs, in which new methodologies
and concepts are proposed to enhance the on-chip networks for
future large-scale 3D integration.Iraqi Ministry of Higher Education and Scientific Research (MOHESR)
Exploring Adaptive Implementation of On-Chip Networks
As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores.
Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies.
Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.Siirretty Doriast
Simulation Of Multi-core Systems And Interconnections And Evaluation Of Fat-Mesh Networks
Simulators are very important in computer architecture research as they enable the exploration of new architectures to obtain detailed performance evaluation without building costly physical hardware. Simulation is even more critical to study future many-core architectures as it provides the opportunity to assess currently non-existing computer systems. In this thesis, a multiprocessor simulator is presented based on a cycle accurate architecture simulator called SESC. The shared L2 cache system is extended into a distributed shared cache (DSC) with a directory-based cache coherency protocol. A mesh network module is extended and integrated into SESC to replace the bus for scalable inter-processor communication. While these efforts complete an extended multiprocessor simulation infrastructure, two interconnection enhancements are proposed and evaluated. A novel non-uniform fat-mesh network structure similar to the idea of fat-tree is proposed. This non-uniform mesh network takes advantage of the average traffic pattern, typically all-to-all in DSC, to dedicate additional links for connections with heavy traffic (e.g., near the center) and fewer links for lighter traffic (e.g., near the periphery). Two fat-mesh schemes are implemented based on different routing algorithms. Analytical fat-mesh models are constructed by presenting the expressions for the traffic requirements of personalized all-to-all traffic. Performance improvements over the uniform mesh are demonstrated in the results from the simulator. A hybrid network consisting of one packet switching plane and multiple circuit switching planes is constructed as the second enhancement. The circuit switching planes provide fast paths between neighbors with heavy communication traffic. A compiler technique that abstracts the symbolic expressions of benchmarks' communication patterns can be used to help facilitate the circuit establishment
Physical parameter-aware Networks-on-Chip design
PhD ThesisNetworks-on-Chip (NoCs) have been proposed as a scalable, reliable
and power-efficient communication fabric for chip multiprocessors
(CMPs) and multiprocessor systems-on-chip (MPSoCs). NoCs determine
both the performance and the reliability of such systems, with a
significant power demand that is expected to increase due to developments
in both technology and architecture. In terms of architecture, an
important trend in many-core systems architecture is to increase the
number of cores on a chip while reducing their individual complexity.
This trend increases communication power relative to computation
power. Moreover, technology-wise, power-hungry wires are dominating
logic as power consumers as technology scales down. For these
reasons, the design of future very large scale integration (VLSI) systems
is moving from being computation-centric to communication-centric.
On the other hand, chip鈥檚 physical parameters integrity, especially
power and thermal integrity, is crucial for reliable VLSI systems. However,
guaranteeing this integrity is becoming increasingly difficult with
the higher scale of integration due to increased power density and operating
frequencies that result in continuously increasing temperature
and voltage drops in the chip. This is a challenge that may prevent
further shrinking of devices. Thus, tackling the challenge of power
and thermal integrity of future many-core systems at only one level
of abstraction, the chip and package design for example, is no longer
sufficient to ensure the integrity of physical parameters. New designtime
and run-time strategies may need to work together at different
levels of abstraction, such as package, application, network, to provide
the required physical parameter integrity for these large systems. This
necessitates strategies that work at the level of the on-chip network
with its rising power budget.
This thesis proposes models, techniques and architectures to improve
power and thermal integrity of Network-on-Chip (NoC)-based
many-core systems. The thesis is composed of two major parts: i)
minimization and modelling of power supply variations to improve
power integrity; and ii) dynamic thermal adaptation to improve thermal
integrity. This thesis makes four major contributions. The first is
a computational model of on-chip power supply variations in NoCs.
The proposed model embeds a power delivery model, an NoC activity
simulator and a power model. The model is verified with SPICE simulation
and employed to analyse power supply variations in synthetic
and real NoC workloads. Novel observations regarding power supply
noise correlation with different traffic patterns and routing algorithms
are found. The second is a new application mapping strategy aiming
vii
to minimize power supply noise in NoCs. This is achieved by defining
a new metric, switching activity density, and employing a force-based
objective function that results in minimizing switching density. Significant
reductions in power supply noise (PSN) are achieved with a low
energy penalty. This reduction in PSN also results in a better link timing
accuracy. The third contribution is a new dynamic thermal-adaptive
routing strategy to effectively diffuse heat from the NoC-based threedimensional
(3D) CMPs, using a dynamic programming (DP)-based distributed
control architecture. Moreover, a new approach for efficient extension
of two-dimensional (2D) partially-adaptive routing algorithms
to 3D is presented. This approach improves three-dimensional networkon-
chip (3D NoC) routing adaptivity while ensuring deadlock-freeness.
Finally, the proposed thermal-adaptive routing is implemented in
field-programmable gate array (FPGA), and implementation challenges,
for both thermal sensing and the dynamic control architecture are addressed.
The proposed routing implementation is evaluated in terms
of both functionality and performance.
The methodologies and architectures proposed in this thesis open a
new direction for improving the power and thermal integrity of future
NoC-based 2D and 3D many-core architectures