Hardware, Software, and Low-Level Control Scheme Development for a Real-Time Autonomous Rover

The objective of this research is to develop a low-cost autonomous rover platform for experiments in autonomous navigation. This thesis describes the design, development, and testing of an autonomous rover platform, based on the commercial, off-the-shelf Tamiya TXT-1 radio controlled vehicle. This vehicle is outfitted with an onboard computer based on the Mini-ITX architecture and an array of sensors for localization and obstacle avoidance, and programmed with Matlab/SimulinkRTM Real-Time Workshop (RTW) utilizing the Linux Real-Time Application Interface (RTAI) operating system.;First, a kinematic model is developed and verified for the rover. Then a proportional-integral-derivative (PID) feedback controller is developed for translational and rotational velocity regulation. Finally, a hybrid navigation controller is developed combining a potential field controller and an obstacle avoidance controller for waypoint tracking.;Experiments are performed to verify the functionality of the kinematic model and the PID velocity controller, and to demonstrate the capabilities of the hybrid navigation controller. These experiments prove that the rover is capable of successfully navigating in an unknown indoor environment. Suggestions for future research include the integration of additional sensors for localization and creation of multiple platforms for autonomous coordination experiments

Optic-Flow Based Car-Like Robot Operating in a 5-Decade Light Level Range

International audienceIn this paper, we present (i) a novel bio-inspired 1-D OF sensor which is robust to high-dynamic-range lighting conditions and independent of the visual patterns encountered, and (ii) a low-cost car-like robot called BioCarBot, which estimates its velocity and steering angle by means of an Extended Kalman Filer (EKF) using only the OF measurements delivered by two downward-facing sensors of this kind. Indoor experiments were carried out, in which the robot was driven in the closed-loop mode, using a proportional integral (PI) controller based on the velocity and steering angle estimates. The results presented here show that our novel OF sensor can deliver a wide range of high-frequency (333 Hz) OF measurements (from 1 to 10 rad s) with a relatively high resolution (up to 0.05 rad s) in a 5-decade high-dynamic range of light levels. Neither the refresh rate nor the resolution of the OF sensors presented here depended on either the visual patterns or the lighting conditions, and could be theoretically set at whatever value required

Characterization of a Low-Cost Optical Flow Sensor When Using an External Laser as a Direct Illumination Source

In this paper, a low cost optical flow sensor is combined with an external laser device to measure surface displacements and mechanical oscillations. The measurement system is based on applying coherent light to a diffuser surface and using an optical flow sensor to analyze the reflected and transferred light to estimate the displacement of the surface or the laser spot. This work is focused on the characterization of this measurement system, which can have the optical flow sensor placed at different angles and distances from the diffuser surface. The results have shown that the displacement of the diffuser surface is badly estimated when the optical mouse sensor is placed in front of the diffuser surface (angular orientation >150°) while the highest sensitivity is obtained when the sensor is located behind the diffuser surface and on the axis of the laser source (angular orientation 0°). In this case, the coefficient of determination of the measured displacement, R2, was very high (>0.99) with a relative error of less than 1.29%. Increasing the distance between the surface and the sensor also increased the sensitivity which increases linearly, R2 = 0.99. Finally, this measurement setup was proposed to measure very low frequency mechanical oscillations applied to the laser device, up to 0.01 Hz in this work. The results have shown that increasing the distance between the surface and the optical flow sensor also increases the sensitivity and the measurement range

A gaze-contingent framework for perceptually-enabled applications in healthcare

Patient safety and quality of care remain the focus of the smart operating room of the future. Some of the most influential factors with a detrimental effect are related to suboptimal communication among the staff, poor flow of information, staff workload and fatigue, ergonomics and sterility in the operating room. While technological developments constantly transform the operating room layout and the interaction between surgical staff and machinery, a vast array of opportunities arise for the design of systems and approaches, that can enhance patient safety and improve workflow and efficiency. The aim of this research is to develop a real-time gaze-contingent framework towards a "smart" operating suite, that will enhance operator's ergonomics by allowing perceptually-enabled, touchless and natural interaction with the environment. The main feature of the proposed framework is the ability to acquire and utilise the plethora of information provided by the human visual system to allow touchless interaction with medical devices in the operating room. In this thesis, a gaze-guided robotic scrub nurse, a gaze-controlled robotised flexible endoscope and a gaze-guided assistive robotic system are proposed. Firstly, the gaze-guided robotic scrub nurse is presented; surgical teams performed a simulated surgical task with the assistance of a robot scrub nurse, which complements the human scrub nurse in delivery of surgical instruments, following gaze selection by the surgeon. Then, the gaze-controlled robotised flexible endoscope is introduced; experienced endoscopists and novice users performed a simulated examination of the upper gastrointestinal tract using predominately their natural gaze. Finally, a gaze-guided assistive robotic system is presented, which aims to facilitate activities of daily living. The results of this work provide valuable insights into the feasibility of integrating the developed gaze-contingent framework into clinical practice without significant workflow disruptions.Open Acces

Mechatronic Systems

Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools