Studies on Sensor Networks with Fiber Optics for Agricultural Environment Monitoring

創価大

Time-Domain Fiber Loop Ringdown Sensor and Sensor Network

Optical fibers have been mostly used in fiber optic communications, imaging optics, sensing technology, etc. Fiber optic sensors have gained increasing attention for scientific and structural health monitoring (SHM) applications. In this study, fiber loop ringdown (FLRD) sensors were fabricated for scientific, SHM, and sensor networking applications. FLRD biosensors were fabricated for both bulk refractive index (RI)- and surface RI-based DNA sensing and one type of bacteria sensing. Furthermore, the effect of glucose oxidase (GOD) immobilization at the sensor head on sensor performance was evaluated for both glucose and synthetic urine solutions with glucose concentration between 0.1% and 10%. Detection sensitivities of the glucose sensors were achieved as low as 0.05%. For chemical sensing, heavy water, ranging from 97% to 10%, and several elemental solutions were monitored by using the FLRD chemical sensors. Bulk indexbased FLRD sensing showed that trace elements can be detected in deionized water. For physical sensing, water and cracking sensors were fabricated and embedded into concrete. A partially-etched single-mode fiber (SMF) was embedded into a concrete bar for water monitoring while a bare SMF without any treatment was directly embedded into another concrete bar for monitoring cracks. Furthermore, detection sensitivities of water and crack sensors were investigated as 10 ml water and 0.5 mm surface crack width, respectively Additionally fiber loop ringdowniber Bragg grating temperature sensors were developed in the laboratory; two sensor units for water, crack, and temperature sensing were deployed into a concrete cube in a US Department of Energy test bed (Miami, FL). Multi-sensor applications in a real concrete structure were accomplished by testing the six FLRD sensors. As a final stage, a sensor network was assembled by multiplexing two or three FLRD sensors in series and parallel. Additionally, two FLRD sensors were combined in series and parallel by using a 2×1 micro-electromechanical system optical switch to control sensors individually. For both configurations, contributions of each sensor to two or three coupled signals were simulated theoretically. Results show that numerous FLRD sensors can be connected in different configurations, and a sensor network can be built up for multiunction sensing applications

Sensores de pressão em fibra óptica para o estudo dos fenómenos da percolação da água em solos

Dada a necessidade de obtermos sistemas monitorizados com elevada precisão, de grande durabilidade e resistentes às condições atmosféricas, surgiu a possibilidade de aplicação das fibras ópticas como sensores para monitorização de pressão. Nesse contexto, as fibras “hetero-core” (fibra óptica composta por uma fibra multimodo entre duas fibras ópticas monomodo) e a utilização de lentes GRIN (“GRaded INdex”) em conjunto com superfícies reflectoras permitem a determinação da pressão e são objecto de estudo desta dissertação. Em termos de aplicação, o objectivo principal desta tese de mestrado foi de proporcionar o projecto e desenvolvimentos da medida de pressão em 48 pontos para um tanque de estudo dos fenómenos de percolação da água nos solos e que é pertencente à Secção de Geotecnia do Departamento de Engenharia Civil da Faculdade de Engenharia da Universidade do Porto. Inicialmente, foi caracterizado um sistema contendo uma fibra “hetero-core” à qual foi aplicada uma curvatura, com auxílio de uma carruagem micrométrica. Este sistema permitiu a simulação do mesmo efeito de aplicação de pressão à fibra “hetero-core”. Na configuração seguinte, usou-se um OTDR (“Optical Time Domain Reflectometer”) para visualização e registo das perdas encontradas durante o processo de dobrar e esticar da fibra “hetero-core”. Ao longo deste registo, várias configurações foram testadas até ser encontrada a cabeça sensora com melhor comportamento para monitorizar a pressão. A multiplexagem foi conseguida ao colocar dois sensores em série, sendo cada um deles constituído por uma fibra “hetero-core” colocada no fundo de um tubo de água disposto verticalmente. Com a adição da água no tubo de água, a curvatura na fibra “hetero-core” aumentava, notando-se claramente que as perdas também subiam. Os resultados obtidos nesta configuração foram bastante satisfatórios permitindo a independência entre os dois sensores dispostos em série. Posteriormente, foi testada uma nova configuração sensora, o sensor de fibra óptica para monitorização de pressão foi construído com recurso a uma lente GRIN e uma superfície reflectora. Esta lente, disposta diante de um espelho, permitiu emitir e captar luz de um determinado comprimento de onda devido à reflexão do sinal luminoso no espelho. Com sucessivos incrementos, afastou-se e aproximou-se a lente ao espelho, registando-se e observando-se as perdas de potência obtidas com auxílio do OTDR. Também para esta configuração foi testada a multiplexagem de vários sensores, tendo sido utilizadas as seguintes opções: um acoplador de 2:1; um acoplador 4:1 e um comutador óptico. Verificou-se que a utilização de um comutador óptico é o melhor caso para a monitorização de pressão de múltiplos sensores. A multiplexagem com recurso ao comutador foi possível, uma vez que permitia a medição independente de cada sensor de pressão num determinado tempo. Com este resultado, é possível monitorizar 48 sensores com recurso ao OTDR, multiplexados temporalmente. Toda esta implementação prática da dissertação foi realizada nas instalações da Unidade de Optoelectrónica e Sistemas Electrónicos no INESC Porto, onde foram caracterizados e estudados sensores com diferentes características que poderão ser lidas neste documento. A componente teórica foi efectuada na Universidade da Madeira.Universidade da Madeir

Novel Specialty Optical Fibers and Applications

Novel Specialty Optical Fibers and Applications focuses on the latest developments in specialty fiber technology and its applications. The aim of this reprint is to provide an overview of specialty optical fibers in terms of their technological developments and applications. Contributions include:1. Specialty fibers composed of special materials for new functionalities and applications in new spectral windows.2. Hollow-core fiber-based applications.3. Functionalized fibers.4. Structurally engineered fibers.5. Specialty fibers for distributed fiber sensors.6. Specialty fibers for communications

A numerical approach into new designs for SPR sensors in D-type optical fibers

This thesis investigates how to improve the performance of current designs of optical fiber sensors based on Surface Plasmon Resonance, and how to use a better understanding of the physical and sensing principles behind them to propose new sensing concepts and ideas. We adopt a methodology based on numerical simulations because they provide a better insight onto the operation of these sensors and because they allow an easy and quick way of testing new designs and concepts without the need to fabricate the sensors. We also show that these simulations have a good agreement with experimental results. We adopt a systematic approach to investigate the various parameters that influence the sensor performance, and present different sensors designs, where we study the localization, optical properties, shape and size of the metal components, combined with different type of fibers, resulting in the coupling between the plasmon and optical modes. Furthermore, we verify that choosing the optical modes used in sensing in multimode fibers can also have advantages. We investigate the use of modern artificial materials, such as metamaterials, as well as the inclusion of multiple wires in the fiber to enhance the performance of the SPR sensor. At a more fundamental level, we show that the control of the coupling between multiple plasmon modes in metal components and the optical modes in the fiber constitutes a new way to improve the performance of the sensor and can be inclusively used to develop a new type of SPR sensors capable of measuring simultaneously two variables, such as the external refractive index and temperatureEsta tese investiga como é possível melhorar o desempenho das estruturas atuais dos sensores de fibra ótica baseados em Ressonância Plasmónica de Superfície (SPR), bem como compreender melhor os princípios físicos e de sensorização na base do seu funcionamento, permitindo propor novos conceitos de sensores. Foi utilizada uma metodologia baseada em simulações numéricas, pois proporcionam um melhor entendimento do funcionamento desses sensores, constituindo uma maneira simples e rápida de testar novas estruturas e conceitos, sem a necessidade de fabricar os sensores. Mostra-se também que essas simulações têm uma boa concordância com os resultados experimentais. Foi adotada uma abordagem em que se investiga sistematicamente os diversos parâmetros que influenciam o desempenho do sensor e se apresentam diferentes estruturas de sensores onde foram estudadas a localização, propriedades óticas, forma e tamanho dos componentes metálicos, combinados com diferentes tipos de fibras, resultando no acoplamento entre os modos plasmónicos e os modos óticos. Também foi verificado que a escolha dos modos óticos utilizados na deteção em fibras multimodo pode apresentar vantagens. Foi investigado ainda o uso de materiais artificiais recentemente desenvolvidos, de que são exemplo os metamateriais, bem como, a inclusão de múltiplos fios metálicos na fibra, de forma a melhorar o desempenho dos sensores SPR. A um nível mais fundamental, foi demonstrado que o controlo do acoplamento entre os múltiplos modos plasmónicos gerados nos componentes metálicos e os modos óticos propagados na fibra constitui uma nova forma de melhorar o desempenho do sensor. Tal pode ser inclusivamente utilizado para desenvolver um novo tipo de sensores SPR capazes de medir simultaneamente duas variáveis, como por exemplo o índice de refração externo e a temperatura

Microwave Photonic Applications - From Chip Level to System Level

Die Vermischung von Mikrowellen- und optischen Technologien – Mikrowellenphotonik – ist ein neu aufkommendes Feld mit hohem Potential. Durch die Nutzung der Vorzüge beider Welten hat die Mikrowellenphotonik viele Anwendungsfälle und ist gerade erst am Beginn ihrer Erfolgsgeschichte. Der Weg für neue Konzepte, neue Komponenten und neue Anwendungen wird dadurch geebnet, dass ein höherer Grad an Integration sowie neue Technologien wie Silicon Photonics verfügbar sind. In diesem Werk werden zuerst die notwendigen grundlegenden Basiskomponenten – optische Quelle, elektro-optische Wandlung, Übertragungsmedium und opto-elektrische Wandlung – eingeführt. Mithilfe spezifischer Anwendungsbeispiele, die von Chipebene bis hin zur Systemebene reichen, wird der elektrooptische Codesign-Prozess veranschaulicht. Schließlich werden zukünftige Ausrichtungen wie die Unterstützung von elektrischen Trägern im Millimeterwellen- und THz-Bereich sowie Realisierungsoptionen in integrierter Optik und Nanophotonik diskutiert.The hybridization between microwave and optical technologies – microwave photonics – is an emerging field with high potential. Benefitting from the best of both worlds, microwave photonics has many use cases and is just at the beginning of its success story. The availability of a higher degree of integration and new technologies such as silicon photonics paves the way for new concepts, new components and new applications. In this work, first, the necessary basic building blocks – optical source, electro-optical conversion, transmission medium and opto-electrical conversion – are introduced. With the help of specific application examples ranging from chip level to system level, the electro-optical co-design process for microwave photonic systems is illustrated. Finally, future directions such as the support of electrical carriers in the millimeter wave and THz range and realization options in integrated optics and nanophotonics are discussed

Micro-/Nano-Fiber Sensors and Optical Integration Devices

The development of micro/nanofiber sensors and associated integrated systems is a major project spanning photonics, engineering, and materials science, and has become a key academic research trend. During the development of miniature optical sensors, different materials and micro/nanostructures have been reasonably designed and functionalized on the ordinary single-mode optical fibers. The combination of various special optical fibers and new micro/nanomaterials has greatly improved the performance of the sensors. In terms of optical integration, micro/nanofibers play roles in independent and movable optical waveguide devices, and can be conveniently integrated into two-dimensional chips to realize the efficient transmission and information exchange of optical signals based on optical evanescent field coupling technology. In terms of systematic integration, the unique optical transmission mode of optical fiber has shown great potential in the array and networking of multiple sensor units.In this book, more than ten research papers were collected and studied, presenting research on optical micro/nanofiber devices and related integrated systems, covering high-performance optical micro/nanofiber sensors, fine characterization technologies for optical micro/nanostructures, weak signal detection technologies in photonic structures, as well as fiber-assisted highly integrated optical detection systems

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

This is the final version. Available on open access from IOP Publishing via the DOI in this recordData availability statement: The data that support the findings of this study are available upon reasonable request from the authors.Photonic technologies offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile that combines the light-gathering power of four 8 m telescopes through a complex photonic interferometer. Fully integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization when operating at the diffraction-limit, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering significant cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns to convert from multimode inputs to single mode outputs, complex aperiodic fiber Bragg gratings to filter OH emission from the atmosphere, complex beam combiners to enable long baseline interferometry with for example, ESO Gravity, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 key areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional integrated instruments will be realized leading to novel observing capabilities for both ground and space based platforms, enabling new scientific studies and discoveries.National Science Foundation (NSF)NAS