Optical Space Division Multiplexing in Short Reach Multi-Mode Fiber Systems

The application of space division multiplexing to fiber-optic communications is a promising approach to further increase the channel capacity of optical waveguides. In this work, short reach and low-cost optical space division multiplexing systems with intensity modulation and direct detection (IM/DD) are in the focus of interest. Herein, different modes are utilized to generate spatial diversity in a multi-mode fiber. In such IM/DD systems, the process of square-law detection is inherently non-linear. In order to obtain an understanding of the channel characteristics, a system model is developed, which is able to show under which conditions the system can be considered linear in baseband. It is shown that linearity applies in scenarios with low mode cross-talk. This enables the use of linear multiple-input multiple-output (MIMO) signal processing strategies for equalization purposes. In conditions with high mode cross-talk, significant interference occurs, and the transmitted information cannot be extracted at the receiver. Furthermore, a method to determine the power coupling coefficients between mode groups is presented that does not require the excitation of individual modes, and hence it can be realized with inexpensive components. In addition, different optical components are analyzed with respect for their suitability in MIMO setups with IM/DD. The conventional approach with single-mode fiber to multi-mode fiber offset launches and optical couplers as well as a configuration that utilizes multi-segment detection are feasible options for a (2x2) setup. It is further shown that conventional photonic lanterns are not suited for MIMO with IM/DD due to their low mode orthogonality during the multiplexing process. In order to enable higher order MIMO configurations, devices for mode multiplexing and demultiplexing need to be developed, which exhibit a high mode orthogonality on one hand and are low-cost on the other hand

The Photonic Lantern

Photonic lanterns are made by adiabatically merging several single-mode cores into one multimode core. They provide low-loss interfaces between single-mode and multimode systems where the precise optical mapping between cores and individual modes is unimportant.Comment: 45 pages; article unchanged, accepted for publication in Advances in Optics and Photonic

Mode-Multiplexed Transmission over Conventional Graded-Index Multimode Fibers

We present experimental results for combined mode-multiplexed and wavelength multiplexed transmission over conventional graded-index multimode fibers. We use mode-selective photonic lanterns as mode couplers to precisely excite a subset of the modes of the multimode fiber and additionally to compensate for the differential group delay between the excited modes. Spatial mode filters are added to suppress undesired higher order modes. We transmit 30-Gbaud QPSK signals over 60 WDM channels, 3 spatial modes, and 2 polarizations, reaching a distance of 310 km based on a 44.3 km long span. We also report about transmission experiments over 6 spatial modes for a 17-km single-span experiment. The results indicate that multimode fibers support scalable mode-division multiplexing approaches, where modes can be added over time if desired. Also the results indicate that mode-multiplexed transmission distance over 300 km are possible in conventional multimode fibers

Low-Cost MIMO radio over fiber system for multiservice das using double sideband frequency translation

In this paper, a novel low-cost DSB frequency translation system is experimentally demonstrated and its theory is mathematically proved. The new system is capable of transmitting wideband LTE MIMO signals and supporting multiple services. Experimentally, 2×2 LTE MIMO channels with 20MHz bandwidth, and a 700MHz carrier frequency, are transmitted simultaneously along with an IEEE 802.11g signal (54Mbps) over a 300m length of multi-mode fiber (MMF). The MIMO channel matrix of the system is retrieved and the condition number is calculated. It can be seen in the experimental results that the system is well conditioned, has a low error vector magnitude (EVM) and the transmission of the MIMO signals has negligible effect on the IEEE 802.11g signal. The use of a preamplifier minimizes the non-linearity introduced by the frequency mixers, resulting in a high spurious-free dynamic range (SFDR). Compared to a single sideband (SSB) system, where multiple filters are used and two channels encounter different EVMs, the new DSB system avoids unnecessary filtering and the impairments introduced will be the same for both channels. Therefore it can be concluded that the improved MIMO over fiber system using DSB frequency translation technology is a potential low-cost solution for multiservice MIMO-enabled distributed antenna systems (DAS).This work was supported in part of the UK Engineering and Physical Sciences Research Council via the COPOS II grant and the European Community via the FP7 programme Quaternian project.This is the author accepted manuscript. The final version is available from IEEE via http://dx.doi.org/10.1109/JLT.2016.258208

Few-Mode Transmission Technology for Ultra-High Capacity Optical Networks

Tesis por compendio[ES] En esta Tesis Doctoral, se propone diferentes técnicas de acoplo y conversión modal destinadas a aumentar la capacidad de transporte en sistemas de telecomunicaciones sobre fibra óptica. En particular, el objetivo principal es el desarrollo de la tecnología necesaria para conseguir una multiplexación modal utilizando un número limitado de modos, de manera controlada. Para ello, se estudian dos escenarios MDM con dos longitudes de onda distinta. Por un lado, usando la longitud de onda de 850 nm sobre SSMF favoreciendo la utilización de componentes ópticos y electro-ópticos de coste mucho menor que sus equivalentes en la banda C+L. Esta novedosa tecnología de transmisión permitirá una nueva generación de interconexiones ópticas de muy alta capacidad aplicable a enlaces chip-a-chip, a backplanes ópticos y también a clústeres de computación de altas prestaciones y centros de conmutación de red. Por otro lado, usando la longitud de onda de 1550 nm sobre guías ópticas basadas en SOI, es decir, Si (silicio) sobre sustrato de SiO2 (óxido de silicio) favoreciendo la utilización de dispositivos basados en tecnología integrada que ofrecen un menor tamaño, mejor repetibilidad y robustez que los dispositivos basados en fibra óptica. Para ello, se propone el uso de acopladores ópticos fusionados siendo un elemento indispensable a la hora de multiplexar y demultiplexar los distintos modos ópticos en un enlace MDM a 850 nm. Esta técnica permite multiplexar/demultiplexar los modos ópticos cuando el tipo de acoplador óptico utilizado es simétrico (DC, del inglés directional coupler), siendo necesario la utilización de un conversor de modos. También se estudia la posibilidad de convertir el modo óptico mediante la utilización de un acoplador óptico asimétrico (ADC, del inglés asymmetrical directional coupler), no siendo necesario utilizar un conversor de modos y simplificando el esquema MDM. Además, en esta tesis doctoral también se propone y evalúa el diseño de un conversor de modos mecánico basado en SSMF. Esta técnica permite obtener el primer modo de orden superior con una alta calidad y sin la necesidad de utilizar un ADC. Después de esto, se propone y evalúa la posibilidad de utilizar acopladores comerciales (diseñados a 1550 nm) a la longitud de onda de 850 nm permitiendo de esta forma reducir la necesidad de utilizar acopladores ópticos y conversores modales específicamente diseñados en dicha longitud de onda. Esta técnica reduciría los costes del sistema al necesitar un menor número de dispositivos y aprovechar los dispositivos diseñados a 1550 nm, siendo más económicos que los diseñados a 850 nm. En esta Tesis también se propone el uso de ADCs en guías strip basadas en SOI para la conversión y multiplexación de los modos ópticos desde la guia fundamental a la guia de dos modos, a la longitud de onda de 1550 nm. Para ello se estudia y demuestra experimentalmente diferentes diseños con el fin de obtener el diseño más robusto frente a las tolerancias de fabricación consiguiendo un rendimiento óptimo. Además, el uso de DCs sobre guías ridge es comúnmente utilizado y ofrece mejores prestaciones que el basado en guías strip, por ese motivo esta Tesis estudia y evalúa el uso de ADCs sobre guías ridge mediante el método de análisis de los índices efectivos de los supermodos par e impar. De esta forma se realiza una comparación entre los diseños óptimos de ambas estructuras (strip y ridge) con el objetivo de averiguar qué diseño ofrece mejores prestaciones. Por último, se propone y estudia el diseño de un acoplador grating capaz de multiplexar y demultiplexar los modos ópticos del modo fundamental y del primer orden superior desde la guia óptica a la fibra óptica y viceversa. Para ello se proponen diferentes diseños con el objetivo de conseguir un diseño más tolerante y eficiente frente a los errores por desalineamiento obteniendo un acoplo óptimo.[CA] En aquesta Tesi Doctoral, es proposen diferents tècniques d'acoblament i conversió modal destinades a augmentar la capacitat de transport en sistemes de telecomunicacions sobre fibra òptica. En particular, l'objectiu principal és el desenrotllament de la tecnologia necessària per a aconseguir una multiplexació modal utilitzant un número limitat de modes, de manera controlada. Per a això, s'estudien dos escenaris MDM amb dos longituds d'onda distinta. D'una banda, usant la longitud d'ona de 850 nm sobre SSMF afavorint la utilització de components òptics i electro-òptics de cost molt menor que els seus equivalents en la banda C+L. Aquesta nova tecnologia de transmissió permetrà una nova generació d'interconnexions òptiques de molt alta capacitat aplicable a enllaços chip-a-chip, a backplanes òptics i també a clústers de computació d'altes prestacions i centres de commutació de xarxa. D'altra banda, usant la longitud d'ona de 1550 nm sobre guies òptiques basades en SOI, és a dir, Si (silici) sobre substrat de SiO2 (òxid de silici) afavorint la utilització de dispositius basats en tecnologia integrada que ofereixen una menor grandària, millor repetibilitat i robustesa que els dispositius basats en fibra òptica. Per a això, es proposa l'ús d'acobladors òptics fusionats sent un element indispensable a l'hora de multiplexar i demultiplexar els distints modes òptics en un enllaç MDM. Aquesta tècnica permet multiplexar/demultiplexar els modes òptics quan el tipus d'acoblador òptic utilitzat és simètric (DC, de l'anglès directional coupler), sent necessari la utilització d'un convertidor de modes. També s'estudia la possibilitat de convertir el mode òptic per mitjà de la utilització d'un acoblador òptic asimètric (ADC, de l'anglès asymmetrical directional coupler), no sent necessari utilitzar un convertidor de modes i simplificant l'esquema MDM. Es mes, en aquesta tesi doctoral també es proposa i avalua el disseny d'un convertidor de modes mecànic basat en SSMF. Aquesta tècnica permet obtindre el primer mode d'orde superior amb una alta qualitat sense la necessitat d'utilitzar un ADC. Després d'açò, es proposa i avalua la possibilitat d'utilitzar acobladors comercials (dissenyats a 1550 nm) a la longitud d'ona de 850 nm permetent d'esta manera reduir la necessitat d'utilitzar acobladors òptics i convertidors modals específicament dissenyats en la dita longitud d'ona. Aquesta tècnica reduiria els costos del sistema al necessitar un menor nombre de dispositius i aprofitant els dispositius dissenyats a 1550 nm, sent més econòmics que els dissenyats a 850 nm. En aquesta Tesi també es proposa l'ús de ADCs en guies strip basades en SOI per a la conversió i multiplexació dels modes òptics des de la guia fonamental a la guia de dos modes, a la longitud d'ona de 1550 nm. Per a això s'estudia i demostra experimentalment diferents dissenys a fi de obtindré el disseny més robust enfront les toleràncies de fabricació aconseguint un rendiment òptim. A més, l'ús de DCs sobre guies ridge és comunament utilitzat i ofereix millors prestacions que el basat en guies strip, per eixe motiu aquesta Tesi estudia i avalua l'ús de ADCs sobre guies ridge per mitjà del mètode d'anàlisi dels índexs efectius dels supermodes parell i imparell. D'aquesta manera es realitza una comparació entre els dissenys òptims de les dos estructures (strip i ridge) amb l'objectiu d'esbrinar quin disseny ofereix millors prestacions. Finalment, es proposa i estudia el disseny d'un acoblador grating capaç de multiplexar i demultiplexar els modes òptics del mode fonamental i del primer orde superior des de la guia òptica a la fibra òptica i viceversa. Per a això es proposen diferents dissenys amb l'objectiu d'aconseguir un disseny més tolerant i eficient enfront dels errors per desalineament obtenint un acoblament òptim.[EN] In this Ph.D. thesis, different mode coupling and mode conversion techniques with the aim to increase the transport capacity in telecommunications systems over optical fiber are proposed. Concretely, the main aim is the development of the technology to achieve MDM using a limited controlled number of modes. Two different MDM scenarios based on two distinct wavelengths have been considered. On one hand, using the 850 nm wavelength over SSMF favors the use of optical and electro-optical devices with costs much lower than their equivalent in the C+L band. This novel transmission technology enables a new generation of very high capacity optical interconnections applicable to chip-to-chip links, to optical backplanes, and also to high-performance computing clusters and network switching centre interconnections. On the other hand, using the 1550 nm wavelength over optical waveguides based on SOI, i.e., Si (Silicon) above SiO2 substrate (silicon oxide), allows the use of integrated devices offering a less size, better repeatability and robustness in comparison with the optical fiber devices. Fused fiber couplers are proposed as key elements to (de)multiplex different fiber modes in a MDM link at 850 nm. The use of a symmetric directional coupler (DC) as a (de)multiplexer requires the use of an additional mode converter. The use of an asymmetrical directional coupler (ADC) as optical (de)multiplexer and mode converter is proposed, avoiding the necessity of an additional mode converter and simplifying the MDM scheme. Furthermore, in this Ph.D. thesis it is also proposed and evaluated the design of a mechanical mode converter at 850 nm using a SSMF. This technique permits to obtain the first high order mode with high quality and without the necessity of using an ADC. After that, it is analyzed and investigated the employment of commercial optical couplers (designed at 1550 nm) at 850 nm wavelength operation, thus avoiding the use of optical couplers and mode converters specifically designed at 850 nm wavelength. The MDM system costs are reduced as fewer devices are required and commercial components designed at 1550 nm are cheaper than the counterparts at 850 nm. In this Ph.D. thesis it is also considered the employment of ADCs over strip waveguides based on SOI technology for the conversion and multiplexing of the optical modes, from single-mode waveguide to high order mode waveguide at the 1550 nm wavelength. Thus, it has been studied and experimentally investigated different designs aimed to achieve the most robust configuration, in which the yield is less affected by the fabrication tolerances. Furthermore, the use of DCs over ridge waveguides is commonly employed and it offers better performance than strip waveguides. For this reason, the Ph.D. thesis studies and evaluates the use of ADCs with ridge waveguides by considering the effective refractive indexes of the even and odd supermodes analysis. In this way, a comparison between strip and ridge structures is done in order to find the optimum design that offer the best features. Finally, it is analyzed the design of a grating coupler capable of multiplexing and demultiplexing the fundamental and the high order mode from the waveguide to the optical fiber and vice versa. Thus, different designs are evaluated in order to achieve a design more robust and efficient to the coupling misalignments.García Rodríguez, D. (2018). Few-Mode Transmission Technology for Ultra-High Capacity Optical Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/115938TESISCompendi

All-optical mode unscrambling on a silicon photonic chip

Propagation of light beams through scattering or multimode systems may lead to randomization of the spatial coherence of the light. Although information is not lost, its recovery requires a coherent interferometric reconstruction of the original signals, which have been scrambled into the modes of the scattering system. Here, we show that we can automatically unscramble four optical beams that have been arbitrarily mixed in a multimode waveguide, undoing the scattering and mixing between the spatial modes through a mesh of silicon photonics Mach-Zehnder interferometers. Using embedded transparent detectors and a progressive tuning algorithm, the mesh self-configures automatically and reset itself after significantly perturbing the mixing, without turning off the beams. We demonstrate the recovery of four separate 10 Gbits/s information channels, with residual cross-talk between beams of -20dB. This principle of self-configuring and self-resetting in optical systems should be applicable in a wide range of optical applications.Comment: 23 pages, 10 figure

Spatially integrated erbium-doped fiber amplifiers enabling space-division multiplexing

L'augmentation exponentielle de la demande de bande passante pour les communications laisse présager une saturation prochaine de la capacité des réseaux de télécommunications qui devrait se matérialiser au cours de la prochaine décennie. En effet, la théorie de l’information prédit que les effets non linéaires dans les fibres monomodes limite la capacité de transmission de celles-ci et peu de gain à ce niveau peut être espéré des techniques traditionnelles de multiplexage développées et utilisées jusqu’à présent dans les systèmes à haut débit. La dimension spatiale du canal optique est proposée comme un nouveau degré de liberté qui peut être utilisé pour augmenter le nombre de canaux de transmission et, par conséquent, résoudre cette menace de «crise de capacité». Ainsi, inspirée par les techniques micro-ondes, la technique émergente appelée multiplexage spatial (SDM) est une technologie prometteuse pour la création de réseaux optiques de prochaine génération. Pour réaliser le SDM dans les liens de fibres optiques, il faut réexaminer tous les dispositifs intégrés, les équipements et les sous-systèmes. Parmi ces éléments, l'amplificateur optique SDM est critique, en particulier pour les systèmes de transmission pour les longues distances. En raison des excellentes caractéristiques de l'amplificateur à fibre dopée à l'erbium (EDFA) utilisé dans les systèmes actuels de pointe, l'EDFA est à nouveau un candidat de choix pour la mise en œuvre des amplificateurs SDM pratiques. Toutefois, étant donné que le SDM introduit une variation spatiale du champ dans le plan transversal de la fibre, les amplificateurs à fibre dopée à l'erbium spatialement intégrés (SIEDFA) nécessitent une conception soignée. Dans cette thèse, nous examinons tout d'abord les progrès récents du SDM, en particulier les amplificateurs optiques SDM. Ensuite, nous identifions et discutons les principaux enjeux des SIEDFA qui exigent un examen scientifique. Suite à cela, la théorie des EDFA est brièvement présentée et une modélisation numérique pouvant être utilisée pour simuler les SIEDFA est proposée. Sur la base d'un outil de simulation fait maison, nous proposons une nouvelle conception des profils de dopage annulaire des fibres à quelques-modes dopées à l'erbium (ED-FMF) et nous évaluons numériquement la performance d’un amplificateur à un étage, avec fibre à dopage annulaire, à ainsi qu’un amplificateur à double étage pour les communications sur des fibres ne comportant que quelques modes. Par la suite, nous concevons des fibres dopées à l'erbium avec une gaine annulaire et multi-cœurs (ED-MCF). Nous avons évalué numériquement le recouvrement de la pompe avec les multiples cœurs de ces amplificateurs. En plus de la conception, nous fabriquons et caractérisons une fibre multi-cœurs à quelques modes dopées à l'erbium. Nous réalisons la première démonstration des amplificateurs à fibre optique spatialement intégrés incorporant de telles fibres dopées. Enfin, nous présentons les conclusions ainsi que les perspectives de cette recherche. La recherche et le développement des SIEDFA offriront d'énormes avantages non seulement pour les systèmes de transmission future SDM, mais aussi pour les systèmes de transmission monomode sur des fibres standards à un cœur car ils permettent de remplacer plusieurs amplificateurs par un amplificateur intégré.The exponential increase of communication bandwidth demand is giving rise to the so-called ‘capacity crunch’ expected to materialize within the next decade. Due to the nonlinear limit of the single mode fiber predicted by the information theory, all the state-of-the-art techniques which have so far been developed and utilized in order to extend the optical fiber communication capacity are exhausted. The spatial domain of the lightwave links is proposed as a new degree of freedom that can be employed to increase the number of transmission paths and, subsequently, overcome the looming ‘capacity crunch’. Therefore, the emerging technique named space-division multiplexing (SDM) is a promising candidate for creating next-generation optical networks. To realize SDM in optical fiber links, one needs to investigate novel spatially integrated devices, equipment, and subsystems. Among these elements, the SDM amplifier is a critical subsystem, in particular for the long-haul transmission system. Due to the excellent features of the erbium-doped fiber amplifier (EDFA) used in current state-of-the-art systems, the EDFA is again a prime candidate for implementing practical SDM amplifiers. However, since the SDM introduces a spatial variation of the field in the transverse plane of the optical fibers, spatially integrated erbium-doped fiber amplifiers (SIEDFA) require a careful design. In this thesis, we firstly review the recent progress in SDM, in particular, the SDM optical amplifiers. Next, we identify and discuss the key issues of SIEDFA that require scientific investigation. After that, the EDFA theory is briefly introduced and a corresponding numerical modeling that can be used for simulating the SIEDFA is proposed. Based on a home-made simulation tool, we propose a novel design of an annular based doping profile of few-mode erbium-doped fibers (FM-EDF) and numerically evaluate the performance of single stage as well as double-stage few-mode erbium-doped fiber amplifiers (FM-EDFA) based on such fibers. Afterward, we design annular-cladding erbium-doped multicore fibers (MC-EDF) and numerically evaluate the cladding pumped multicore erbium-doped fiber amplifier (MC-EDFA) based on these fibers as well. In addition to fiber design, we fabricate and characterize a multicore few-mode erbium-doped fiber (MC-FM-EDF), and perform the first demonstration of the spatially integrated optical fiber amplifiers incorporating such specialty doped fibers. Finally, we present the conclusions as well as the perspectives of this research. In general, the investigation and development of the SIEDFA will bring tremendous benefits not only for future SDM transmission systems but also for current state-of-the-art single-mode single-core transmission systems by replacing plural amplifiers by one integrated amplifier